Weird N Wacky

Purpose. A Safety Data Sheet (formerly called Material Safety Data Sheet) is a detailed informational document prepared by the manufacturer or importer of a hazardous chemical. It describes the physical and chemical properties of the product.

It is about meticulous planning, attention to detail, and a commitment to preparedness. As aviation professionals, you understand that safety is not a product of chance but a result of deliberate effort

JSA is a job safety analysis that identifies hazards and risks associated with a specific job. HIRA is a hazard identification and risk assessment that evaluates risks and hazards in a workplace.

Remember! Take adequate safety precautions and work safely 👍 follow my channel With that in mind, here are 10 rules of forklift safety. 1.Ensure only trained employees operate forklift. ... 2.Inspect the forklift before using it. ... 3.Use at a reasonable speed. ... 4.Be mindful of your surroundings. ... 5.Wear appropriate clothing. ... 6.Always load up facing the heaviest part of the machine. ... 7.Always follow the proper load technique. 8. Be mindful of other people 9. Avoid abrupt stops 10. Always park at a designated spot

Electrical Hazard Prevention and Safety Tips Equipment having a cord with a missing ground pin should be taken out of service immediately. Exposed wires present a danger of electric shock or electrocution. Extension cords or power strips should not be connected to each other. This is known as a "daisy chaining".

This H2S Safety Awareness course is designed to equip employees with information about properties of H2S, the health hazards associated with exposure, detection and monitoring methods, acceptable exposure limits, proper personal equipment and precautionary actions.

This H2S Safety Awareness course is designed to equip employees with information about properties of H2S, the health hazards associated with exposure, detection and monitoring methods, acceptable exposure limits, proper personal equipment and precautionary actions. Personal Precautions: Evacuate the area immediately. Isolate the hazard area. Keep out unnecessary and unprotected personnel. Evacuate downwind locations. Symptoms of acute exposure include nausea, headaches, delirium, disturbed equilibrium, tremors, skin and eye irritation, and convulsions. Inhaling high concentrations can produce extremely rapid unconsciousness and death. Dermal exposure to the liquefied gas can cause frostbite injury. Hydrogen sulfide (also known as H2S, sewer gas, swamp gas, stink damp, and sour damp) is a colorless gas known for its pungent "rotten egg" odor at low concentrations. It is extremely flammable and highly toxic. Control Exposures 1.Use exhaust and ventilation systems to reduce hydrogen sulfide levels. Make sure that the system is: ... 2.Train and educate workers about hazards and controls. Training topics may include: ... 3.Establish proper rescue procedures to safely rescue someone from a hydrogen sulfide exposure

👉 Remember! Take adequate safety precautions and work safely 👍 Never wear dangling chains, loose clothing, rings or have loose, long hair that could get caught up in moving parts. Don't distract people who are using machines. Never remove any safeguards, even if they seem to make the job more difficult.

Follow MY PAGE to Stay in the Know about HSE! Show your love with a double tap! Share to spread the word and reach more! Tag your buddies who need to see this. Nowadays, many regions worldwide cope with challenges such as extreme air temperatures, severe windstorms, and droughts. In many parts of the world, already at present, heatwaves kill more people than any other natural hazard, and there is a strong tendency for this phenomenon to increase.

1. Use tools, equipment and machinery properly 2. Report any unsafe conditions 3. Wear all necessary safety gear 4. Keep your workplace clear from clutter 5. Stay hydrated 6. Practice good posture when sitting or lifting 7. Take regular breaks 8. Be aware of your surroundings 9. Never take shortcuts 10. Remain aware of new safety procedures

Hierarchy of Controls - Know About it in Detail... Follow to Get Your HSE Insights Here! Show your support with a thumbs-up 👍, share your thoughts in the comments 🖊️, and spread the knowledge through sharing 🤝 The hierarchy of controls is a method of identifying and ranking safeguards to protect workers from hazards. They are arranged from the most to least effective and include elimination, substitution, engineering controls, administrative controls and personal protective equipment.

The three points of contact rule is simple. When climbing or descending ladders, trucks and equipment, always maintain contact with one hand and two feet, or two hands and one foot. If you maintain three points of contact while you climb, you can limit your exposure to slips and falls.

If poor or inadequate protective equipment is present when working at heights, this will increase the risks associated with falling and could lead to a fatal accident. PPE is essential as things like harnesses, ropes, hard hats and other equipment can minimize risk or lessen the severity of potential injuries, Working at heights poses a significant risk, leading to injuries or fatalities annually due to falls from ladders, scaffolds, roofs, and similar structures. This hazard is prevalent among various professionals, including construction workers, painters, window washers, firefighters, and others. However, these incidents can be avoided by prioritizing safety as a fundamental principle.

Dusts generally cause damage to the lungs and respiratory system, but some types can cause cancer. The main diseases associated with inhalation of hazardous dusts are: Benign pneumoconiosis.

Do not give rides or use the forks to lift people. Only trained and certified workers may operate a forklift. Ensure operators are trained on types of trucks in use. Remove from service any forklift found to be in unsafe operating condition.

This four-hour course is designed to address the basic training requirements for personnel who need to work with energized equipment or machinery.

All employees, whether permanent or temporary, should be concerned with safety and should work as safely as possible. Making excuses for not working safely or trying to bypass safety rules and standards can cause injury to you or someone else.

Hypoxia is low levels of oxygen in your body tissues. It causes symptoms like confusion, restlessness, difficulty breathing, rapid heart rate, and bluish skin. Many chronic heart and lung conditions can put you at risk for hypoxia. Hypoxia can be life-threatening.

Guards. Guards are physical barriers that enclose dangerous machine parts and prevent employee contact with them. They must be strong and fastened by any secure method that prevents the guard from being inadvertently dislodged or removed. This is the preferred method of protection.

How to Do a Risk Assessment Matrix Step 1: Identify Hazards. Relating to your scope, brainstorm potential hazards. ... Step 2: Calculate Likelihood. For each hazard, determine the likelihood it will occur. ... Step 3: Calculate Consequences. ... Step 4: Calculate Risk Rating. ... Step 5: Create an Action Plan. ... Step 6: Plug Data into Matrix.

Unprotected openings can pose significant risks to construction workers. A split-second misstep can result in a worker plummeting through an unprotected opening, causing severe injuries or even death. Head and internal injuries are common outcomes of such accidents. Recognizing the potential dangers of these openings and using the right fall protection system is crucial for maintaining a safe work environment and preventing unnecessary harm to workers. 👉 Take adequate safety precautions and work safely 👍

Safety is everyone's responsibility! All employees, whether permanent or temporary, should be concerned with safety and should work as safely as possible. Making excuses for not working safely or trying to bypass safety rules and standards can cause injury to you or someone else.

Level up your project Management skills follow up my page..

A hazard is anything that could cause harm. And, risk, is a combination of two things – the chance that the hazard will cause harm and how serious that harm could be

This means that resettable flashback arrestors come with a greater capacity for protection. They will shut down all connected hot work operations in an instant, so that faults and hazards can be identified and removed. However, they can then be reset once the inner sleeve has been recalibrated.