POD buildings powered by the Sun

今天在挖好的區域鋪設襯底, 橡膠布, 襯面, 回填一英尺大小的鵝卵石, 探討如何將整體構架牢牢地用鵝卵石埋在地下一英尺半的位置上。此視頻將展示在這裏: https://fanti.pyrapod.org

將 在 這裏 展示 https://fanti.pyrapod.org

This video will be shown here: https://pyrapod.org

詳 情 請 見: https://fanti.pyrapod.org

昨天剛剛收到歐洲團隊 Cedric Born (賽隹克・伯恩) 發來的視頻，這是他根據我們早前設計的最小的金豆莢4T而做的視頻，其中包括從此結構中抽出來的泡泡盒和泡泡塔。這回我叫他做了與上次一樣但帶有中文字幕的。 僅用短短一分半鍾，此視頻簡介了SolaRoof（獨陽屋頂）的歷史和今天，模擬了肥皂泡在泡泡盒裏的充滿，在泡泡塔中悠然落下，在金豆莢4T中運行並充滿的全過程。看了叫人一目了然，讓我們對肥皂泡遮陽保溫，利用免費的太陽能來創建冬暖夏涼、白天涼爽夜晚溫和的環境，有了形象的印象。 鼓勵點贊，鼓勵傳播分享，讓如此簡單有效的節能環保技術快快普及！

Day 1 was started by Ella the dog using his paws, followed by human digging by hands: me, Laura and Grace. Now by Collin's equipment.

I wrote and post the dog dig started story here https://pyrapod.org/349/p4g-17-diy-site-dug-started-by-ella-the-dog-wow This is the second day and this video was made after I came back from visiting Tim Allen's metal welding shop "Down to the Wire Welding" https://www.downtothewirewelding.com At the end, two ladies joined the digging: Laura and Grace. Nice!

This video will be displayed at https://pyrapod.org​

在2021年3月21日去溫哥華之前, 做好了展示如何在加拿大申請金豆莢4G-17建築許可證的視頻, 但因爲沒有時間編輯。今天回來後，除了預備明天挖掘機進駐所需的准備工作外，就將先前錄制的視頻編輯了一下。由于各地的情況不同，申請的過程可能出入很大，但所要求的資料是大同小異的。 https://fanti.pyrapod.org

今天將支架送到 Tim Allen 的 Down to the Wire 焊接作坊那裏之後，回來錄了一小段，解釋我爲什麽要向下挖地基，利用地熱原理來創建一個由鵝卵石和水構成的蓄熱區。兩位女士（樓下房客和我的大女兒）跟進，繼續開挖。 https://fanti.pyrapod.org

所講的都在視頻裏了, 看視頻就可以了。爲了說明得更清楚, 配了一些圖片和短視頻。此視頻將放在我們新建的網站: http://fanti.pyrapod.org

I explain in this video why I have switched from PyraPOD4Tall to this larger one. This video will be displayed in the DIY member area: https://pyrapod.org

Glad to receive this visualization video from Cedric Born (founder of https://www.fennecfoundry.com​ and https://www.icone.media​ ) showing how PyraBox (Bubble Box), PyraShower (Bubble Shower), and PyraPOD4 Tall (P4T) are interchangable. The nice thing is, he found ways to animate how bubbles are produced in all three products and how bubble foam moves in P4T. Video wonderfully made and is short!

More info at https://pyrapod.com

這是截止到今天（2021年3月5日）爲止，最新的三維圖，是爲著我在加拿大BC省Kelowna家的後院設計的。 我的這個大棚的雙門朝東，因此肥皂泡的擺放應該一個放在南面，一個放在北面（對不起，上次的那個是對的）。 底部的兩個紅色管子不需要，因爲是爲了蓄水，底部不能有出口。我會在回填鵝卵石的時候埋入一個比較深的一個立式容器，裏面放上一個排水泵，便于任意控制此人工地下水的水位。 另外，向下走的三個台階的兩邊要有水泥牆，以便在牆外回填土壤。 https://pyrapod.com/zh-tw

estoday, our design team met the local metal fabricator Tim Allen in Kelowna and discussed a few minor things about the metal structure. After that we looked at the site preparation and came up with a 3S solution: the Smartest, the Simplest, and the Smallest greenhouse design with a 10x10 footing plus underground pool built with gravels and a pond liner. Have not seen anything like in my past dealing with solar thermal and geo thermal. So smart, so simple, and so bloody easy. Thank Richard Nelson for this genius design! I will display this video on our website https://pyrapod.com/update

今天通過網絡，與幫我做鋁合金結構的Tim相見，我們一行四個人，對要安裝在我們家後院的金豆莢4T，進行了具體的商議 (見視頻中的後半部)。 除了一些在結構細節上的微調外，我們對這個問題需要做出一個清晰的判斷：金豆莢4T的根基，到底是建在地面之上，還是設在地面以下？ 雖然將其建在地面以上不太影響其功用，但是，因爲其總高是18英尺，超出了當地市政府 (BC省Kelowna市) 的限制，即任何獨立的建築，包括溫室大棚，其高度不能超過16英尺。 爲此，我的這個溫室大棚，必須向下降2英尺。鑒于這種考慮，我希望更加有效地利用地熱的效果。 更多信息見網站: https://pyrapod.com

Corin Smith sent me a video clip, which is the first part of this video, looks at nature from geometric and numerological perspect. I find it so important to combine it with a video we made earlier. Watch both parts. Enjoy!

OK, after discussing with Richard Nelson, the inventor of SolaRoof with 6 patents, I have compiled all the videos I can get into this one video. For the DIY project that Harvey Rayner of England did, it is documented as a 2004 project but I miss labeled it as 2006. I am glad that I have found videos showing works between 1973 and 1982. I am working on a story in words, describing how Richard first got the vision and later on got the ideas to take actions on it. More videos on new and ongoing projects will be updated on our site: https://pyrapod.com

這是我將兩個視頻合在一起而成的, 兩個都美幻絕倫, 但卻反差極大。看完後有什麽感想, 請留言, 以便彼此交流互動。

PyraPOD8 with an octagon footing is sectioned into four quad panels and four X panels. This is especially useful with large scale build so that each panel can be serviced separately if there is a damage to the fabric.

This video shows what the finished product PyraPOD8 Grande will look like. Thanks to Ríkarður Leó Guðmundsson for making the video and to Angela Argentina who added the music.

爲了方便大家了解 SolaRoof 過去所走過的艱難歲月，我將手頭所有能找到的視頻都放在一起了，免得大家自己一個一個去找。這次整理的，比上次的更加完全，因爲補上了 1982 年往前的 9 年歷史，特別是 1973 年那一年發生的突破點：由水霧的功用發現氣泡的功用。近期會對網站進行大調整，詳情見 https://pyrapod.com

This is a tent like greenhouse with double layer cavity filled with soap bubble foam that can be created and destroyed on demand. It take just a few minutes to fill the cavity and then the foam lasts quite a few hours before it is needed to fill again. It captures solar thermal energy during the day and insulates it to keep it warm.

將如此一步步地將我所做的展示給大家，好叫願意一起做自建的人，可以在我親自示範下，也嘗到自己動手的樂趣，和新型大棚的妙處和益處所在。 更多內容見 https://pyrapod.com/zh-tw​ 下一步是打磨、噴漆、建造並調試發泡器。請訂閱我的頻道，謝謝！