POD buildings powered by the Sun

Continue to improve our first bubble generator in front of Tim Allen's Down To The Wire Welding shop, wearing his T-shirt. If you live in the Okanagan area, make sure to hire Tim as your welder! Tim's website: https://www.downtothewirewelding.com Our website: https://pyrapod.org

This change was made on April 7, day 23 of settting up PyraPOD4 Grande-17 prototype in the backyard of our house. Almost no nuts and bolts as most parts are welded together and can be quickly set up on site. Tim Allen, the owner of Down To The Wire Welding, lives in Kelowna BC, Canada and his website is https://www.downtothewirewelding.com​ This video will be displayed on our site at https://pyrapod.org

In this video https://rumble.com/vdms55-deeper-into-the-magic-world-of-soap-bubbles-fun-and-usage.html?mref=b6r65&mc=a81cq I showed a clip from a girl using simple way to produce soap bubble foam. Today I did it myself along with a few other things. This video will be displayed on https://pyrapod.org/category/public-diy-etc

Today Richard, Yang and I had two sessions with 3D Sketchup design with Tim Allen of www.DownToTheWirewelding.com joining the first session. We worked on the details of Bubble Generator based on a whole week testing.

To be displayed on https://pyrapod.org

Mr. Dong Jianyi shows clearly with the temperature curves in his Chinese passive solar greenhouse vividly what the problem is, basically too much swing of temperatures: too hot during the day and not warm enough during the night. Go to his video here https://www.youtube.com/watch?v=pXPakvPzgpE&t=890s to see the temperature curves. How to solve the problem? Check this video to see why storing the solar heat in thermal mass of water and liquid soap bubble foam is important.

Will be displayed at https://pyrapod.org Since we got the correct reticulated foam sheet later in the day, we used the same air filter screen I used in earlier test.

This video will be displayed here https://pyrapod.org

This video was edited based on a 2-hour recorded design session. This video will be displayed here https://pyrapod.org

I explain using the 3D Sketchup file that our in-house designer Yang Zhou produced under the guidance of inventor Richard Nelson. This video will be displayed at https://pyrapod.org

Not a drop of water leaked. Great! https://pyrapod.org

This morning Richard, Yang, Tim and I met together at 2.bitypod.net together with others joining in later on this morning. The goal was to come up with a simpler design with welded joints and use mainly 2x2 inch square aluminum tubes. This video will be displayed at https://pyrapod.org

最難買的 是合適的噴頭, 普通 灌溉 或 噴灑農藥的 噴頭 都不行。

一周用泡泡盒調試發泡器下來，發現一些需要改進的細節，也肯定了不需要大變的地方，爲下一步自建或批量奠定了堅實的基礎。對于金豆莢的運作原理和背後的奇妙故事，歡迎造訪我們的網站 PyraPOD.com/tw (運作原理) 和 fanti.PyraPOD.org (奇妙故事)。

詳 情 見 網 站: https://fanti.pyrapod.org

此視頻 在 這裏 展示: https://fanti.pyrapod.org

But before the real test of the bubble generator, I made a big mistake, causing me to have to empty the rock bed water, dig the rocks and re-attaching the drain hoses! https://pyrapod.org

本來緊接著用一個切掉瓶底紮毛巾的辦法吹出氣泡後, 就會做一個用風扇吹氣泡的裝置, 但節外生枝, 在考慮減少肥皂液池水的時候, 闖了一個禍（詳情見視頻）, 但好消息是: 肥皂泡發生器做成了！測試了兩種風扇，兩種多孔網，摸索出一些秘訣。此视频在这里展示 https://fanti.pyrapod.org

這個視頻 將在 這裏展示: https://fanti.pyrapod.org

這是第四次測試兩個相連容器之間的密封性, 這次成功了, 滴水不漏了！此視頻將在這裏展示: https://fanti.pyrapod.org

The video conference was hosted by Katie and this section was editied based on the YouTube live streamed file. This will be displayed on https://pyrapod.org

Day counted wrong for the last time, it should have been day 17 rather than 19 (have now corrected). So this time is day 20. Still have one place leaking water, that is the bulkhead connecting two barrels. Have tighten it up and will test again next time. This video will be displayed at https://pyrapod.org

上次的題目有誤, 應該是第17天, 因此本次是第20天。今天是第三次測試水管與容器連接處的密封性能。還是有一個地方漏水, 是因爲三英寸管的超大螺絲帽沒有鎖緊的緣故, 爲此又做了一個木制的扳手。

I made the video last evening but upload it this morning. This video will be displayed here: https://pyrapod.org

Video will be displayed here: https://pyrapod.org