DIY : Car Jobs

Honda Civic 1996 Good Startup

Stuck with poor startup, check grounding and battery!

So guys this is just an experiment of painting a bumper with a spray gun, and I am not a professional painter or have experience of painting cars, hence it's just an experiment. So here I am going to explain what I did, and want an opinion about what I did wrong. Bought the following items for PKR 1,150: 1. Paint around 200ml 2. Thinner 500ml 3. Plastic Primer 100ml 4. Hardener - 100ml 5. Lacquer - 100ml 6. 220 and 400 grit sandpapers 7. Steel putty with small patra Steps done: Sanded all scratches with 220 grit sandpaper Washed bumper Applied plastic primer and waited 2 hours Applied putty and sanded it with 400 grit paper when it dried Washed bumper and dried it with a soft cloth Mixed paint with thinner in the ratio of 2:1 and added a little hardener as well Applied two coats of paint and it was looking great and plain but had no shine Once dried in almost after 10 minutes I mixed hardener with lacquer and sprayed it. When I sprayed this I saw pieces of paint in the air and after the application of this which were actually from dirty spray gun. Modification of spray gun video: https://www.youtube.com/watch?v=MMlgaS9TaoQ Honda Civic Bumper Removal: https://www.youtube.com/watch?v=Yr0_kHUxfjU Pakwheels forum discussion: https://www.pakwheels.com/forums/t/civic-2010-diy-bumper-paint/2522183 #Bumper #Paint #SprayGun