GBLynden's RC

This is my Maiden Flight with the HobbyKing Avios Albatross HU-16 V2 US Coast Guard Flying Boat. It is based on the Grumman HU-16 Albatross. Click here to get your Avios Alby RC Plane: https://bit.ly/3EtfNiW The links in this description is an affiliate link. It gives me a small commission on sales which helps support the channel and keep it independent. Link to Flight Battery: https://amzn.to/3Enfbvb Thanks to John for recording this flight for me. Here is a link to his YouTube Channel: https://www.youtube.com/user/JohnVH541 This is how Hobby King Describes this Avios Albatross V2 RC Flying Boat: "When Avios released the Albatross HU-16 back in early 2019 it was extremely well received around the globe. This was due to being something just that little bit different in a PNF format, had excellent flying qualities, looked great, and was fun to fly off of land, and particularly water where it was in its element. The best though can always be made even better, so Avios has now introduced the Albatross HU-16 V2, this comes in a striking US Coast Guard color scheme with factory-applied decals. Other improvements include clear cockpit windows for an improved scale appearance, better slow flight performance due to less paint which saves weight (the white in the color scheme is the natural color of the EPO foam), and perfectly color-matched plastic parts for a better appearance and finish. Also, the lengths of the servo leads and electronic wiring have been reduced to further save weight, improve access, and make for a neater installation. Last but not least is a clear plastic water rudder, this is more discreet but is still fully functional. The Avios Albatross HU-16 is a beautiful twin-engine flying boat with a large monohull, and wing floats, the entire underneath of the front portion of the hull is reinforced with plastic. This allows it to happily take the knocks and bangs of using a grass airfield to fly from, but as mentioned before, it really does come into its own when operating from your favorite lake or waterway. Taxi-ing, and lining up for take-off are made all that much easier with the water rudder and the supplied Aerostar forward/reverse water-resistant ESC's. Built-in flaps provide plenty of lift and make the landings and take-offs that much easier and extremely scale-like." The Plug-N-Fly Albatross is powered by twin pre-installed Aerostar 3536-850KV brushless outrunner motors driving scale 3-blade 10x6 propellers. The 2 Aerostar 30A reversing ESC's are also pre-installed along with the 7 splash-proofed 9g servos. The Albatross was designed around a 3000~4000mAh 4S battery, but for scale flying it is equally at home on a 4000~5000mAh 3S battery. With the 3S 5000mAh set-up, flights of around 15mins are possible with mixed throttle use. EPO foam is still used for all the major components, this gives strength, durability, and the surface finish is excellent. Also included are navigation lights, molded cowlings, and a comprehensive hardware pack which includes pushrods, and screws, etc. The Albatross in its US Coast Guard color scheme provides a great presence in the air, looks outstanding, and scale low passes over water are an absolute dream, even more so now thanks to the weight saving. If you have never flown a model off of water before, and have never experienced the pure joy and fun of doing so, then the Albatross is the perfect model to get your water wings with! So, get out on the water and go soaring across the sky with the Avios Albatross HU-16 V2. Features: • Versatile flying boat design, great from grass, amazing from water. • Striking US Coast Guard color scheme with factory-applied decals. • Pre-installed twin AeroStar brushless motors and water-resistant reversing ESCs (suitable for differential thrust set-up if desired) • Clear cockpit windows for improved scale appearance * Reduced all up weight improving stability and slow flight performance. • Clear plastic, discreet water rudder • Navigation lights Specs: Wingspan: 1620mm (63.7”) Length: 1210mm (47.6”) Weight: 2300g Motor: 2 x AeroStar 3536 850KV brushless outrunner ESC: 2 x AeroStar 30A RVS brushless Propellers: Scale 3-blade 10x6 Servos: 7 x 9g (splash-proof) Required: 1 x 6ch transmitter and receiver 1 x 3000~4000mAh 4S LiPo battery or 1 x 4000~5000mAh 3S LiPo battery Foam glue"

Watch the E-flite UMX Night Vapor High Alpha & Other Fun right now! Links to this E-flite Night Vapor: - Horizon Hobby: https://bit.ly/3FeQcgc - Hobbyzone: https://bit.ly/3hCjLLk - Amazon: https://amzn.to/2Q20JEG - Amain: https://bit.ly/3naKKig The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc or visit https://www.gblynden.com/. Let me know if you would like me to review the new E-flite UMX Twin Otter on this channel. GBLynden's Recommended Flight Battery: https://amzn.to/2LYk6fT Thanks to John for recording this flight for me. Here is a link to his YouTube Channel: https://www.youtube.com/user/JohnVH541 Here are my review notes for this E-flite UMX Night Vapor RC Plane: Pros: - The lights are awesome! - Carbon fiber everywhere on this RC Ultra Light Airplane - Landing gear snaps off and on - Durable ultra micro build with updates from the Parkzone Night Vapor - Customizable LED lighting - AS3X & Optional SAFE Select Cons: - The red crop mark - Rudder missing a panel side of details This is how Horizon Hobby describes this Ultra Micro Remote Control Airplane: "Now with a stronger airframe, customizable LED lighting, plus AS3X Technology and optional-use SAFE Select technologies, the E-flite UMX Night Vapor slow flyer is more fun than ever – indoors and outdoors, day or night! Over its nearly decade-long history, the original ParkZone Night Vapor slow flyer became a favorite of a wide range of pilots for its unique indoor and outdoor, day or night, versatility. There was simply nothing else like it. Now the E-flite UMX Night Vapor picks up where that popular ultra-micro aircraft left off, adding exciting upgrades that make it more fun than ever before! With enhanced durability, the UMX Night Vapor is now even better at handling bumps and collisions when flying indoors in suitable spaces such as large rooms or gymnasiums, or outside almost anywhere in calm to low wind conditions. Plus, you can choose between two fully factory-assembled versions: the convenient, all-in-one-box Ready-To-Fly (RTF) that includes a transmitter, battery, and charger, or the Bind-N-Fly (BNF) Basic that helps you lower costs by using your own compatible Spektrum™ transmitter, battery, and charger. Either way, you can be flying almost anywhere, day or night, in just the time it takes to charge a battery! The E-flite UMX Night Vapor makes it possible for intermediate to experienced pilots to fly in more places than ever before! Fly indoors in large family rooms, garages, conference rooms, and gymnasiums. Or, fly outdoors almost anywhere in calm to low wind conditions – day or night! Compared to the ParkZone® Night Vapor, the updated and upgraded UMX Night Vapor has a stronger, reinforced airframe along with more durable metal landing gear that unscrews easily for removal or replacement. The proven power system featuring a stronger prop shaft is compatible with 1S 70mAh to 200mAh LiPo batteries to deliver a wide range of performance and flight time options. Plus, built-in telemetry delivers real-time battery voltage data to compatible transmitters to make you aware of approximately much "power" remains while you fly. Multiple user-selectable color options for the factory-installed LED lights make it possible to personalize the look of your UMX Night Vapor when flying in the night sky. The convenient, all-in-one-box RTF (Ready-To-Fly) version includes a transmitter, battery, and charger, or the BNF® (Bind-N-Fly) Basic version helps you lower costs by using your own compatible Spektrum™ transmitter, battery, and charger. Both versions include exclusive AS3X® and optional-use SAFE® Select technologies for smoother and easier flight — plus they arrive 100% factory-assembled and ready to fly right out of the box!"

This is my E-flite UMX A-10 E-flite UMX A-10 Thunderbolt II 30mm EDF RC Jet Plane Fun Rip. I love this Ultra Micro A-10 EDF Jet from Horizon Hobby! E-flite UMX A-10 Warthog 30mm EDF Ultra Micro Jet Links: - Horizon Hobby: https://bit.ly/3J5M9Fy - Hobbyzone: https://bit.ly/3sv6okZ - Amazon: https://amzn.to/3mkBHfX The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc or visit https://www.gblynden.com/. Let me know if you would like me to review the new E-flite UMX Twin Otter or the E-flite F-14 Tomcat on this channel. 3S 850 mAh Spektrum Smart Battery with IC2 Connector: - Horizon Hobby: https://bit.ly/3WsVVVh - Amazon: https://amzn.to/3cMzOWm - Hobbyzone: https://bit.ly/2PZY5yY Spektrum S2200 G2 AC 2x200W Smart Charger: - Horizon Hobby: https://bit.ly/3ZXlCjV - Amazon: https://amzn.to/39DKGUo - Hobbyzone: https://bit.ly/3mi69r4 IC2 Adapter For Charging: - Amazon: https://amzn.to/3fHwNIw - Hobbyzone: https://bit.ly/2QYf4SU Spektrum XBC100 Smart Battery Checker & Servo Driver: - Amazon: https://amzn.to/2ESwAyB - Hobbyzone: https://bit.ly/3hSUJqq - Amainhobbies: https://bit.ly/2XjRWPh RC Equipment Used In This Video: - Spektrum DX6e Radio: https://bit.ly/3QXFFug - UMX A-10 Worthog: https://bit.ly/3J5M9Fy Hobbyzone RC Planes: - Arrows BAe Hawk EDF Jet: https://bit.ly/2VY0HB7 - Arrows T-33 EDF Jet: https://bit.ly/3h3Z24a - Arrows F-86 EDF Jet: https://bit.ly/3hIli3C - Arrows F-15 EDF Jet: https://bit.ly/3Cxi10D - Arrows RC MiG-29 EDF Jet: https://bit.ly/2ZDmjBY - Arrows RC Marlin EDF Jet: https://bit.ly/2LUe4cN - Arrows T-28 Trojan RC Warbird: https://bit.ly/2LOr3N4 - Arrows P-51 Mustang RC Warbird: https://bit.ly/2LVGrak - Arrows F8F Bearcat RC Warbird: https://bit.ly/36zIjzq - Arrows Bigfoot RC Plane: https://bit.ly/2TJliVh Accessories: Spektrum Smart Checker: https://bit.ly/329hl12 Spektrum NX8 Radio: https://bit.ly/2SFAaXA Spektrum AR410 Receiver: https://bit.ly/2BUAIk2 Thanks to John for recording this for me. Here is a link to his YouTube Channel: https://www.youtube.com/user/JohnVH541 E-flite UMX A-10 RC Jet Review Notes: Pros: - Ugraded EDF Units from 28mm to 30mm - 3S power handling - This can take advantage of a number of the Smart features - The landing gear has been improved - Strengthened nose and other weak points have received upgrades Cons: - A magnet was missing from the fuse to hold on the canopy. Not cool and it caused my canopy to come off during a rough landing on the maiden flight. - IC2 connector for many, but not those that are already emersed in the Smart Ecosystem. - The recommended CG in the manual is not correct for mine, but I quickly found the sweet spot. This is how Horizon Hobby describes the updated E-flite UMX A-10 BNF Basic EDF Jet: "The E-flite UMX A-10 Thunderbolt II Twin 30mm EDF ultra micro jet is the most practical and easiest to fly A-10 RC model yet! New upgrades make this replica of the iconic U.S. Air Force aircraft easier for a wider variety of experienced pilots to enjoy — including those with limited EDF experience. The BNF® Basic model’s industry-leading Spektrum™ 2.4GHz technology binds to your 5+ channel DSMX/DSM2 transmitter for full 4-channel control, plus the benefits of exclusive AS3X® and optional-use SAFE Select technologies. It’s 100% factory-assembled and ready to deliver an authentic A-10 jet flying experience almost immediately. The fully-molded airframe features a factory-applied "desert camo" trim scheme and is strengthened with a carbon fiber reinforced fuselage and nose. Factory-installed twin brushless power systems feature more powerful 2S and 3S-compatible outrunner motors with larger diameter 30mm fans, for improved vertical performance and speed compared to other models in its class — plus longer-than-average EDF flight times when using the recommended 450–850mAh LiPo batteries. Use the included fixed landing gear with steerable nose wheel to taxi, take off and land on paved, packed dirt or grass surfaces at large parks and fields. Or leave the landing gear off for more speed and vertical performance plus easy over hand launches and landings on grass. With the A-10 Thunderbolt II Twin 30mm EDF, you can start flying your first mission within minutes!" #GBLynden #Eflite #A10

This is Wild Bill Flynn's E-flite Ultrix 600mm BNF Basic Maiden Flight Review At Log Show. Links to Big Ultrix: Hobbyzone: https://bit.ly/3mb7l0V & Amazon: https://amzn.to/3nsVWsM The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc or visit https://www.gblynden.com/. 3S 850 mAh Spektrum Smart Battery with IC2 Connector: - Amazon: https://amzn.to/3cMzOWm - Hobbyzone: https://bit.ly/2PZY5yY This is how Horizon Hobby describes it: "BIGGER FLIES EVEN BETTER! Soon after it was introduced, the UMX™ Ultrix™ became one of our most popular ultra-micro models. There was, and still is, nothing else like it! The unique delta wing design excels at smooth sport flying, basic aerobatics, and even aggressive 3D — all in the same flight. This scaled-up version offers the same unique capabilities AND the advantages of a larger size. It's easier to fly because it's easier to see and handles more wind. The Ultrix 600mm also uses more common 3S 800–850+ mAh batteries and includes an optional-use fixed nose wheel so it can takeoff from and land on smooth surfaces. Like the original, it has an incredible power-to-weight ratio for hovering capability and unlimited vertical performance. Differential thrust adds yaw control and the ability to perform advanced aerobatics including harriers, amazing flat spins, and more. Plus, the extremely durable EPP airframe is fully factory-assembled so the Ultrix can be ready to fly just minutes after you open the box! Features - Innovative and unique design capable of smooth sport, aerobatic AND 3D flying all in the same flight - Scaled up from the UMX™ Ultrix™ to offer better visibility and the ability to fly in more wind - Fits 3S 800–850+ mAh LiPo batteries for a wide range of performance and flight times - Powerful twin brushless motors deliver the power to hover and climb out vertically - Differential thrust for yaw control to perform flat spins and other maneuvers - Provides telemetry data to compatible transmitters including flight battery voltage - Easy to fly with innovative and optional-use SAFE® Select flight envelope protection - The unmatched stability and locked-in feel of exclusive AS3X® technology - Spektrum™ receiver with industry-leading 2.4GHz DSMX® technology - Extremely durable yet lightweight, fully-molded EPP airframe - Fully factory-assembled and ready to fly right out of the box - Optional LED light kit (sold separately) for flying at night MORE CAPABILITY AND VERSATILITY The Ultrix™ 600mm is a smooth handling, extremely versatile delta wing aircraft with aerobatic and 3D capabilities you'd never expect based on its looks alone. Twin brushless motors deliver an incredible power-to-weight ratio that offers good speed, plenty of power to hover, and unlimited vertical performance. Differential thrust adds the ability to perform harriers, flat spins, and more amazing aerobatics. And extremely durable EPP construction makes it one of the toughest E-flite® models ever! An enlarged version of the popular UMX™ Ultrix, the Ultrix 600mm is easier to see and handles windy conditions even better, aided by exclusive AS3X® technology that works behind the scenes to smooth out the effects of wind and turbulence to deliver a locked-in feel. Optional-use SAFE® Select technology makes it easy even for low-time pilots to fly successfully in large yards, parks, sports fields, RC flying, and other fields. The included optional-use fixed nose wheel makes it possible to taxi, takeoff, and land on smooth surfaces. Or you can leave the nose wheel off for more speed and vertical performance plus easy hand launches over and landings on grass. Fully factory-assembled, the Ultrix 600mm is ready to fly within minutes of opening the box. Just add a 3S 800–850+mAh battery and bind it to a compatible Spektrum™ DSMX®/DSM2® equipped transmitter. It even delivers a variety of real-time power system related telemetry data – including battery voltage, current, and more – to compatible transmitters. You can also install the optional LED light kit (sold separately) for improved visibility during daylight conditions and to fly at night!"

This is Tim's Arrows RC Viper 50mm EDF Jet Flight With Mt. Baker Views. Link to Arrows RC Viper EDF Jet: https://bit.ly/3rDxBmy The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent. Other Hobbyzone RC Planes: - Arrows BAe Hawk EDF Jet: https://bit.ly/2VY0HB7 - Arrows T-33 EDF Jet: https://bit.ly/3h3Z24a - Arrows F-86 EDF Jet: https://bit.ly/3hIli3C - Arrows F-15 EDF Jet: https://bit.ly/3Cxi10D - Arrows RC MiG-29 EDF Jet: https://bit.ly/2ZDmjBY - Arrows RC Marlin EDF Jet: https://bit.ly/2LUe4cN - Arrows T-28 Trojan RC Warbird: https://bit.ly/2LOr3N4 - Arrows P-51 Mustang RC Warbird: https://bit.ly/2LVGrak - Arrows F8F Bearcat RC Warbird: https://bit.ly/36zIjzq - Arrows Bigfoot RC Plane: https://bit.ly/2TJliVh Accessories: - Spektrum Smart Checker: https://bit.ly/329hl12 - Spektrum NX8 Radio: https://bit.ly/2SFAaXA - Spektrum AR410 Receiver: https://bit.ly/2BUAIk2 Review Notes for this Arrows Viper EDF Jet: Pros: - Looks great - Plastic nose cone for durability - Grips for easy hand tossing - Fantastic value price, check links in the description! - Powerful 50mm EDF unit - Three plastic skids on the bottom - It handles very similarly to the E-flite Viper Jet - Designed for 3S packs so you can get a lot of packs for hours of fun without breaking the bank. Cons: - I prefer all screws to any glue, but it wasn’t bad overall. This is how Hobbyzone describes this fun little Viper 50mm EDF PNP: "Simple is beautiful. Without any landing gear to deal with, the Arrows RC 50mm Viper is lightweight and streamlined—perfect for those with a tight flying field or budget! To minimize drag, increase flight time and guarantee the Viper's precision flight characteristics, Arrows RC designed a rigid single-piece wing structure and horizontal stabilizer. The lightweight airframe and esceptional aerodyncamics give the Arrows RC 50mm Viper excellent low speed handling and flight time uncharacteristic for small EDF jets of its size. Power comes courtesy of a 50mm 11 blade fan unit, 2627-4500kV brushless motor and a high performance 30A ESA (with 3A BEC) giving unparalleled speed and sound. How do you get pinnacle performance on a small budget? Let Arrows RC work its magic with the 50mm Viper! Features: - Powerful 2627-4500kV brushless motor. - Highly efficient 50mm 11 bladed EDF unit. - Reliable, high-performance 30A ESA with 3A BEC. - Simple lightweight design for extended flight times. - Highly-attractive trim scheme for maximum visibility in the air. - Uncompromised performance despite being budget friendly. Specifications: - Wingspan: 773.5mm (30.5in) - Length: 696mm (27.4in) - CG (Center of Gravity):60-70mm from leading edge - Power System: 2627-4500kV - Electronic Speed Control: 30A - Propeller / EDF: 50mm 11 bladed EDF unit - Servos: 9 gram servo x 3 - Landing Gear: None - Required Battery: 11.1V 1300mAh 30C - Required Radio: 4 Channel transmitter and receiver required - Ailerons: Yes - Elevator: Yes - Flaps: No - Lights: No - Material: EPO Foam - Skill Level: Intermediate" #ArrowsRC #RCJet #GBLynden

This is my Unboxing of the Arrows RC Bigfoot 1300mm RTF With Vector Stabilization. It is very cool entry level STOL RC Plane with everything you need in the box! Link to RTF Arrows Bigfoot: https://bit.ly/3CBG5hs The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent. Here are my Review Notes: Pros: - RTF kit with everything you need to get into the air - Top feeder battery tray - Two different flight modes - Plenty of power on 3S - All-terrain tundra tires for multiple surfaces - Excellent set of lights - Flaps with nice deflection - Great presence Cons: - The tires are likely to bounce on pavement, especially for a beginner. This is how Hobbyzone describes this RC Bush Plane: "As a do-it-all multi purpose aircraft, the Arrows RC Bigfoot has amazing features found on a whole multitude of aircraft. In terms of flight characteristics, the Big foot is trainer-like and easy to handle. It also has bush plane genes, with over-sized flaps that give unbelievable low and slow performance (takes off within 3 meters and flies on 1/3 throttle) and giant tundra tires for all-terrain performance! If you are a fan of scale, you'll love the landing, navigation, and strobe lights along with the eye catching red trim scheme. Designed to be easily assembled, the Bigfoot features a completely screw-together design, taking mere minutes to assemble for experienced pilots. Includes a LiPo Battery 11.1V 2200mAh 25C 3S1P with XT60 (AHBAT02) Go where no plane has gone before with the Arrows RC Bigfoot." #ArrowsRC #ArrowsBigfoot #GBLynden

This video features a flight with a stunning Giant Scale PT-17 Stearman RC Biplane With Moki Radial Engine that purrs like a kitten, plus a Freewing A-10 RC Jet Crash right at the beginning of the video! Link to similar RC Planes: https://bit.ly/3Uio952 The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc Visit https://www.gblynden.com/ to learn more about the hobby! RC Accessories: - Spektrum Smart Checker: https://bit.ly/329hl12 - Spektrum IX20 Radio: https://amzn.to/3qFTbHe - Spektrum AR620 Receiver: https://bit.ly/3Aay021 Other Hobbyzone RC Planes: - Arrows Husky 1800mm PNP STOL RC Plane: https://bit.ly/3v3qQM9 - Arrows BAe Hawk EDF Jet: https://bit.ly/2VY0HB7 - Arrows T-33 EDF Jet: https://bit.ly/3h3Z24a - Arrows F-86 EDF Jet: https://bit.ly/3hIli3C - Arrows F-15 EDF Jet: https://bit.ly/3Cxi10D - Arrows RC MiG-29 EDF Jet: https://bit.ly/2ZDmjBY - Arrows RC Marlin EDF Jet: https://bit.ly/2LUe4cN - Arrows T-28 Trojan RC Warbird: https://bit.ly/2LOr3N4 - Arrows P-51 Mustang RC Warbird: https://bit.ly/2LVGrak - Arrows F8F Bearcat RC Warbird: https://bit.ly/36zIjzq - Arrows Bigfoot RC Plane: https://bit.ly/2TJliVh There were tons of RC Plane Crashes at this event and the jet was one I was able to catch when watching the flight prep with this big beast! "The PT-17 traces its roots to the Stearman Model 70, built as a private venture to meet a 1934 U.S. Army Air Corps request for a new trainer to replace its aging primary trainer fleet. Re-engined with a Wright J-5 Whirlwind, the design was first ordered by the U.S. Navy in 1935 as the NS-1. Using a Lycoming R-680-5 radial engine and known as the Model 75, the Air Corps ordered the type into production as the PT-13 in 1936. With a variety of engines and designations, the Model 75 went on to become one of the most widely produced and used primary trainers in U.S. military service. The Model 75 biplane featured a fabric-covered, welded steel tube fuselage and spruce wing construction, and enjoyed a reputation as a simple, cost effective design. Student pilots occupied the front cockpit, while the instructor sat in a rear cockpit with identical controls. Its rugged, forgiving nature made it an excellent primary trainer, providing a relatively safe introduction for pilot trainees into military flight. The Boeing Aircraft Company bought out the Stearman Company in the middle 1930s, and continued production of the Model 75 for the military. Although built by Boeing, the Model 75 continued to be known as the “Stearman”. In 1940, a Continental R-670-5 engine was fitted to the design to create the PT-17, of which over 3,500 were eventually ordered for U.S. Army service. The plane also enjoyed large U.S. Navy orders as the N2S, and in 1942 both services adopted an interchangeable version as the N2S-5/PT-13D, powered by the Lycoming R-680-17 engine. Demand for the Stearman at the outbreak of World War II outstripped engine supply, so another powerplant, the Jacobs R-755-7, was used on the airframe to create the PT-18." #PT17Stearman #RCJetCrash #GBLynden

This is my Maiden Flight Review of the E-flite Turbo Timber Evolution 1.5M BNF RC Plane. Links to this E-flite Timber RC Plane: https://bit.ly/3UbAUOC The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc Radio Used: - Hobbyzone: https://bit.ly/2SFAaXA - Amazon: https://amzn.to/3qlysrJ 4S 2200 Spektrum Smart Battery: - Hobbyzone: https://bit.ly/30kHBUg - Amazon: https://amzn.to/3sWHiex Spektrum XBC100 Smart Battery Checker & Servo Driver: - Amazon: https://amzn.to/2ESwAyB - Hobbyzone: https://bit.ly/3hSUJqq - Amainhobbies: https://bit.ly/2XjRWPh Thanks to John for recording this flight for me. Here is a link to his YouTube Channel: https://www.youtube.com/user/JohnVH541 These are my review notes: Pros: - Battery bay on top - Nice light kit - BNF with AS3X & SAFE Select - 3S or 4S power options - Has a Smart ESC & Receiver - Overall nice looking scheme - Comes with options floats and hardware Cons: - Bubbled up decals were annoying - Dings on main wing tips - Ailerons were WAY out of trim and it was not clear how to mechanically trim them This is how Horizon Hobby describes this new RC Plane: "Many RC pilots got their first taste of flying a Short Take Off and Landing (STOL) capable airplane with the original E-flite Timber 1.5m model. Its friendly handling, nimble sport performance, and takeoff-and-land-almost-anywhere abilities made it one of the most popular RC aircraft of all time — widely acclaimed and highly recommended as a great "next step" after a trainer, as the perfect first STOL-capable aircraft, and as one of the best all-around, fun-to-fly sport models for a wide range of pilots. Its next evolution, the Turbo Timber 1.5m, proved even more popular than the original with the addition of metal-geared servos, a 3S and 4S compatible power system, plus a turboprop-styled nose and 3-blade propeller. Now comes the Turbo Timber® Evolution 1.5m, ready to continue the Timber legend with new upgrades that deliver more durability, convenience, and capabilities than ever before — plus a fresh and modern look! The E-flite Turbo Timber Evolution 1.5m has been evolved into the Smartest, most convenient, capable, and durable Timber yet! Popular features from the original Timber are all there: the shock-absorbing landing gear with oversized, tundra-style wheels; optional-use float set and leading edge slats; functional slotted flaps; and an LED lighting system with landing, navigation and strobe lights. So are the enhancements that gave the Turbo Timber® more performance and capabilities, including a turboprop-styled nose, 3-blade prop and spinner, a more powerful 3S and 4S compatible power system, and a stiffer wing with durable, reliable metal-geared servos. Now the Turbo Timber Evolution 1.5m adds a new top hatch for faster, easier battery changes, plus combined connectors for simpler wing installation and removal. Strengthened landing gear mounts improve the model's durability and STOL capability when flying from rough terrain. The proven Turbo Timber power system is upgraded with an exclusive Spektrum™ Avian™ 60-amp Smart ESC, and the BNF® Basic version is equipped with an AR637TA receiver to provide full-range, real-time telemetry data including battery voltage, current, motor RPM and more — plus motor reversing for special ground handling and other capabilities — along with the benefits of AS3X® and optional-use SAFE Select technologies. There's even a fresh, modern trim scheme for the durable, composite-reinforced airframe! The Turbo Timber Evolution 1.5m remains the best "next step", everyday sport and STOL-capable model for a wide range of pilots — only it's now better than ever!" EFL105250 #Eflite #TurboTimberEvolution #GBLynden

This is my Maiden Flight Review of the FMS Pitts V2 1400mm RC Biplane. Link to FMS Pitts Biplane: https://bit.ly/3S98HI4 The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc Visit https://www.gblynden.com/ to learn more about the hobby! Link to FMS Website: https://www.fms-model.com/ - AR410 Receiver: https://bit.ly/3zE0Xmr - Spektrum Smart 6S 30C 5000 Battery: https://bit.ly/3Kox8iL or https://bit.ly/2Y0ePL5 - Spektrum Smart Checker: https://bit.ly/329hl12 Thanks to John for recording this for me. Here is a link to his YouTube Channel: https://www.youtube.com/user/JohnVH541 My FMS Pitts RC Plane Review Notes: Pros: - Excellent paint and decal application. - 6S Pitts Power - Can break down for transport with a little effort. - Once assembled, it it built like a TANK with robust construction. - Highly detailed panel lines and rivets. - Only needs a 4 channel RX, so you save money there. - The plane flies and lands WAY better than my E-flite Pitts 850mm RC Plane. - I flew is successfully with Spektrum Smart 6S 30C 5000 (SPMX50006S30). Cons: - The screws could have been labeled better for a quicker and easier assembly. - Horizontal stab plastic struts were not fun, but care was taken and it worked out just fine. This is how FMS Describes this Big Pitts RC Plane: "The Pitts Special is a light aerobatic biplane designed by Curtis Pitts. It has accumulated many competitions wins since its first flight in 1944. The Pitts biplanes dominated world aerobatic competition in the 1960s and 1970s and, even today, remain a potent competition aircraft in the lower categories. Built upon the successful V1 Pitts biplane, FMS is proud to announce the brand-new Pitts V2. Redesigned with a massive 1400mm wingspan, the Pitts V2 is constructed of lightweight and robust EPO foam material. Proprietary connector plugs built into the wing structure means that the wings can be attached to and detached from the fuselage using just a few screws. The slide-fit wing struts are just as simple, slide them on in just a few seconds and the wing is securely braced! An oversized battery bay accommodates most 6S packs with ease- giving the pilot ample power to attempt all aerobatic maneuvers. Hobbywing 50A ESC provides bulletproof performance! While ensuring that the Pitts Special is faithfully recreated, FMS has worked hard to minimize its profit margins in the hopes that pilots who love the Pitts V2 will find it affordable. With graceful lines from a bygone era, robust airframe and a state-of-the-art power system, the Pitts V2 is a model you shouldn’t miss!" #FMS #RCBiplane #GBLynden

This is my Unboxing & Review of the Big & Beautiful FMS Pitts V2 1400mm RC Biplane. Link to FMS Pitts Biplane: https://bit.ly/3S98HI4 The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc Visit https://www.gblynden.com/ to learn more about the hobby! Link to FMS Website: https://www.fms-model.com/ - AR410 Receiver: https://bit.ly/3zE0Xmr - Spektrum Smart 6S 30C 5000 Battery: https://bit.ly/3Kox8iL or https://bit.ly/2Y0ePL5 - Spektrum Smart Checker: https://bit.ly/329hl12 Thanks to John for recording this for me. Here is a link to his YouTube Channel: https://www.youtube.com/user/JohnVH541 My FMS Pitts RC Plane Review Notes: Pros: - Excellent paint and decal application. - 6S Pitts Power - Can break down for transport with a little effort. - Once assembled, it it built like a TANK with robust construction. - Highly detailed panel lines and rivets. - Only needs a 4 channel RX, so you save money there. - The plane flies and lands WAY better than my E-flite Pitts 850mm RC Plane. - I flew is successfully with Spektrum Smart 6S 30C 5000 (SPMX50006S30). Cons: - The screws could have been labeled better for a quicker and easier assembly. - Horizontal stab plastic struts were not fun, but care was taken and it worked out just fine. This is how FMS Describes this Big Pitts RC Plane: "The Pitts Special is a light aerobatic biplane designed by Curtis Pitts. It has accumulated many competitions wins since its first flight in 1944. The Pitts biplanes dominated world aerobatic competition in the 1960s and 1970s and, even today, remain a potent competition aircraft in the lower categories. Built upon the successful V1 Pitts biplane, FMS is proud to announce the brand-new Pitts V2. Redesigned with a massive 1400mm wingspan, the Pitts V2 is constructed of lightweight and robust EPO foam material. Proprietary connector plugs built into the wing structure means that the wings can be attached to and detached from the fuselage using just a few screws. The slide-fit wing struts are just as simple, slide them on in just a few seconds and the wing is securely braced! An oversized battery bay accommodates most 6S packs with ease- giving the pilot ample power to attempt all aerobatic maneuvers. Hobbywing 50A ESC provides bulletproof performance! While ensuring that the Pitts Special is faithfully recreated, FMS has worked hard to minimize its profit margins in the hopes that pilots who love the Pitts V2 will find it affordable. With graceful lines from a bygone era, robust airframe and a state-of-the-art power system, the Pitts V2 is a model you shouldn’t miss!" #FMSPitts #RCBiplane #GBLynden

Watch my Maiden Flight with the FMS Ranger 850mm RTF GPS RC Trainer Plane. Link to this Beginner RC Plane: https://amzn.to/3TcyFsR The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc Link to the FMS Site: https://bit.ly/2X6OzO8 Thanks to John for recording this flight for me. Here is a link to his YouTube Channel: https://www.youtube.com/user/JohnVH541 Trainer RC Plane Review Notes: Pros: - Ready to fly with little assembly out of the box - Smooth throttle response make it easy to fly - Nice and rigid EPO foam - Tricycle landing gear - Powerful 2S brushless motor - GPS & Return to home functionality - Nav light in the nose to indicate GPS being engaged Cons: - No AA batteries - GPS protocol is more confusing than it should be for a beginner plane. This is how FMS describes this RC Airplane: "Skill, know-how and space has always been limiting factors in bringing new enthusiasts into the wonderful world of RC Aviation, until now! FMS has always been dedicated to enabling pilots of every skill level to enjoy the thrills of flight. Innovation, then is in our DNA. FMS is proud to announce the 850mm Ranger. Like its sibling, the high winged airframe design with a tricycle landing gear, is very easy to fly by default. A dedicated flight control paired with a GPS system allows pilots to fly under beginner, intermediate, and fully manual flight modes. An innovative flight perimeter fence and return to home functions provide bulletproof reliability and ease of mind- flying has never been so simple. Flight perimeter fence function: if the aircraft is in excess of 120m away from the pilot, the aircraft will return to home automatically, with the pilot having the option of taking over the controls at any time. Once over the home point, the aircraft will circle at a 25M altitude at roughly 40km/h. Return to home function: in the off change that the pilot loses orientation of the aircraft, the return to home function can be trigger and the aircraft will flight back to the home point. Like the flight perimeter function, this function does not take away the pilot's ability to control the aircraft at any time. Once over the home point, the Ranger circles until further control inputs are given. Absolute beginner rejoice! The FMS 850mm Ranger has everything the is needed for flight! A 12A esc/receiver combo reduce the need to connect cables and a 2315-3850kv motor, 7.4V 850mAh 25C battery and four 1.9g micro servos give the lightweight 305g aircraft incredible performance. Fly at a small park, basketball court, or even your own back yard! The innovative 850mm Ranger is the perfect way to start earning your wings!" Stay tuned for the maiden flight of this plane, the FMS Pitts, and the E-flite Turbo Timber Evolution. #FMS #FMSRanger #GBLynden

This is my Unboxing, Build, & Review for the FMS Ranger 850mm RTF GPS RC Trainer Plane. Link to this Beginner RC Plane: https://amzn.to/3TcyFsR The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc Link to the FMS Site: https://bit.ly/2X6OzO8 Trainer RC Plane Review Notes: Pros: - Ready to fly with little assembly out of the box - Nice and rigid EPO foam - Tricycle landing gear - Powerful 2S brushless motor - GPS & Return to home functionality - Nav light in the nose to indicate GPS being engaged Cons: - No AA batteries - GPS protocol is more confusing than it should be for a beginner plane. This is how FMS describes this RC Airplane: "Skill, know-how and space has always been limiting factors in bringing new enthusiasts into the wonderful world of RC Aviation, until now! FMS has always been dedicated to enabling pilots of every skill level to enjoy the thrills of flight. Innovation, then is in our DNA. FMS is proud to announce the 850mm Ranger. Like its sibling, the high winged airframe design with a tricycle landing gear, is very easy to fly by default. A dedicated flight control paired with a GPS system allows pilots to fly under beginner, intermediate, and fully manual flight modes. An innovative flight perimeter fence and return to home functions provide bulletproof reliability and ease of mind- flying has never been so simple. Flight perimeter fence function: if the aircraft is in excess of 120m away from the pilot, the aircraft will return to home automatically, with the pilot having the option of taking over the controls at any time. Once over the home point, the aircraft will circle at a 25M altitude at roughly 40km/h. Return to home function: in the off change that the pilot loses orientation of the aircraft, the return to home function can be trigger and the aircraft will flight back to the home point. Like the flight perimeter function, this function does not take away the pilot's ability to control the aircraft at any time. Once over the home point, the Ranger circles until further control inputs are given. Absolute beginner rejoice! The FMS 850mm Ranger has everything the is needed for flight! A 12A esc/receiver combo reduce the need to connect cables and a 2315-3850kv motor, 7.4V 850mAh 25C battery and four 1.9g micro servos give the lightweight 305g aircraft incredible performance. Fly at a small park, basketball court, or even your own back yard! The innovative 850mm Ranger is the perfect way to start earning your wings!" Stay tuned for the maiden flight of this plane, the FMS Pitts, and the E-flite Turbo Timber Evolution. #FMS #FMSRanger #GBLynden

This is Tim's RC Plane Crash with his E-flite Night Timber X 1.2m RC Bush Plane that features a Reverse Thrust Crash Into Corn. That made him, my GF, & I the Children Of The Corn! This crash will also make it onto the next RC Plane Crash Compilation video lol Links to E-flite Night Timber X: - Horizon Hobby: https://bit.ly/403N2nw - Amazon: https://amzn.to/39cjr1D - Hobbyzone: https://bit.ly/2MiQmHe - Amainhobbies: https://bit.ly/2Zh6nUo The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc Visit https://www.gblynden.com/ to learn more about the hobby! Radio Used: Spektrum NX8 Radio: https://bit.ly/2SFAaXA RC Equipment Used In This Video: Pros: - Lights lights lights! They are stunning and will make a great E-flite Night Flyer! - Parts and pieces are protected by plastic bags. - A good color scheme. - The landing gear it big and has nice suspension - It has optional SAFE Select that I decided NOT to setup for now. - The build & radio setup are not too bad. - Big throws on the control surfaces for 3D flight - Smart equipment features (Sorry I didn't cover them, I need more time for that) Cons: - Small dents on top of the fuse - The wiring by the main wing was wrapped around the servo so badly that I had to take things apart to reroute it. - Collets for prop installation adds another possible failure point and is a very questionable choice on a plane like this that is marketed to hang by its prop. - The battery bay being on the bottom of the plane is just plain silly in 2020. That is all I am going to say about that. I will need to tune it in calmer air like I did with my E-flite UMX Turbo Timber, which is now a near perfect flyer! This is how Horizon Hobby describes this Bush RC Plane: "The E-flite Timber X 1.2m combined the STOL capabilities of the original Timber 1.5m model with a wing design featuring oversized ailerons and flaps, plus an enlarged rudder and elevator and a more powerful 3S and 4S compatible power system, to also deliver 3D performance you'd expect from an all-out aerobat. Now the Night Timber® X 1.2m adds factory-installed, high-visibility LED lights throughout the airframe for flying all day AND all night! It's also equipped with a 60-amp Spektrum Avian Smart ESC, and the BNF® Basic version is equipped with an AR637TA receiver that offers full-range telemetry including real-time battery voltage, current, temperature and more w/ motor reversing for special ground handling and other capabilities – when using compatible transmitters. Features - Incredible Short Takeoff and Landing (STOL) plus 3D capabilities - Integrated high-visibility LED lights to fly all day AND all night - Oversized control surfaces with double-beveled hinge lines - Six durable and factory-installed high-torque, metal-geared servos - 60-amp Spektrum™ Avian™ Smart ESC provides real-time battery voltage, temperature and other data, plus reversing capabilities, via compatible receivers and transmitters - Spektrum AR637TA receiver with full-range telemetry and industry-leading DSMX technology - The unmatched stability and locked-in feel of exclusive AS3X Technology - Shock-absorbing landing gear with oversized tundra-style wheels - Functional and factory-installed LED landing, navigation and strobe lights - Includes optional-use leading edge slats CAPABLE TO THE EXTREME The E-flite Timber X 1.2m unleashed a new era of STOL plus 3D aerobatic capability. Based on the extremely popular E-flite Timber 1.5m model but featuring a new wing design, oversized control surfaces plus a 3S and 4S compatible power system, it offered an even wider flight envelope to deliver a truly "mild to wild" experience. And in addition to the standard LED landing, navigation and strobe lights, the Night Timber® X 1.2m adds integrated high-visibility LED lights throughout the airframe that make it possible to fly pretty much any time – day OR night! It also features exclusive Smart Technology via the 60-amp Spektrum™ Avian™ Smart ESC, and the BNF Basic version is equipped with an AR637TA receiver that offers full-range telemetry including real-time battery voltage, current, temperature and more to compatible transmitters, plus reversing for special ground handling and other capabilities! Hollow-core EPO construction with composite reinforcement results in a lightweight yet strong airframe that offers the same flying weight as the original Timber X – even with the added LED lights. That also makes it capable of handling extreme aerobatic maneuvers while keeping the wing loading low for impressive Short Takeoff and Landing (STOL) and slow flight performance." Let me know if you are interested in my reviewing the new E-flite Ultimate 3D 950mm Smart BNF Basic with AS3X & SAFE (EFL16550). #Eflite #NightTimberX #GBLynden

This is my HobbyKing Avios King Twin 1700mm Civilian RC Plane Maiden Flight Review. Link to this Avios Twin RC Plane: https://bit.ly/3sIYNQH The link in this description is an affiliate link. It gives me a small commission on sales which helps support the channel and keep it independent. Thanks to John for recording this flight for me. Here is a link to his YouTube Channel: https://www.youtube.com/user/JohnVH541 Hobby King Avios King Twin Review Notes: Pros: - Easy to fly - Beautiful trim scheme - Large Civilian RC Airplane - RC Twin props sounded great - Stunning lights made flying at sunset stress-free - Breaks down easy for transport and storage - Performs loops well - Flaps and retracts - Handled the cross-wind landing well Cons: - The steerable nosewheel had some flex, but the production model should have less flex and be stronger. Hobbyking describes this Beechcraft King Air type RC Plane like this: This great-looking and superb flying Avios KingTwin 1700 sports/scale model is based on a small twin-turboprop and is very reminiscent of the type used by the military or civilian charter airlines around the world. The simplistic, yet striking color scheme depicts the type of paint jobs commonly used on civilian propliners. The KingTwin 1700 is packed full of cool features including LED lights, retracts, and split flaps. The powertrain of 2 x Aerostar 3748-820KV brushless outrunners with Aerostar 40A ESCs was chosen by the Avios team after careful testing. This combination of motors, ESCs, contra-rotating props, and a 4S LiPo battery proved to be the optimum setup for power and duration. The KingTwin 1700 has the ability to operate happily off of smooth, short-grass fields, and of course hard runway surfaces. The split flaps enable scale take-offs and landings, and the daylight visible LED lights add that touch of realism. For transportation, the outer wing panels feature a unique latching system that allows for quick and easy assembly and removal. This system also includes a quick connect/disconnect plug and socket for the servos and LED lights. Throughout, the KingTwin 1700 uses the very popular and reliable Turnigy HXT900 servos - this is a first for an Avios model. Due to the low parts count of the tough EPO airframe, and being PNF, the KingTwin 1700 is very quick and straightforward to put together, most of it has been pre-assembled at the factory. The Avios KingTwin 1700 is fantastic to fly and looks brilliant in the air. It has excellent low-speed handling, and at speed, it really grooves and locks in. It's a real pleasure to fly. This impressive twin-engined model is a worthwhile addition to any modeler's hangar for its looks, ease of assembly, and excellent flight characteristics. Features: • A great looking sport/scale model of a typical twin-engined turboprop • Powertrain is optimized for performance and duration • Retractable landing gear, split flaps, and working, daylight visible LED lights • Unique detachable wingtips for easy transportation • Low parts count for easy, quick assembly of the EPO airframe • Plug N Fly - motors, ESCs, HXT900 servos, and LED lights are pre-installed at the factory • Excellent flying characteristics, especially at low speeds Specs: Type: Avios (PNF) KingTwin 1700 Sports/Scale Executive Turboprop Airplane Wingspan: 1700mm Length: 1196mm Flying Weight: 2985g (inc battery) Motor: 2 x Aerostar 3748-820KV brushless outrunner ESC: 2 x Aerostar 40A brushless Servos: 7 x Turnigy HXT900 Propellers: 1 x 3 blade L/H rotation, 1 x 3 blade R/H rotation Landing Gear: 3 x Servoless retractable Included: 1 x Avios KingTwin 1700 EPO airframe 2 x Aerostar 3748-820KV brushless outrunner 2 x Aerostar 40A brushless ESC 7 x Turnigy HXT900 servo 3 x Servoless retractable landing gear with scale oleos 1 x LED daylight visible LED system 1 x Set of scale parts 1 x Set of pushrods and connectors. 1 x Set of assorted screws 1 x Quick-Start set-up guide Required: - 6 channel transmitter and receiver - 4S 3000~4000mAh LiPo/LiHv battery of 30C or more w/XT60 - XT90 to XT60 battery adapter for battery packs fitted with XT90 connectors - Suitable LiPo battery charger - Adhesives Please note: A quick-start set-up guide is included with each kit, a copy of the complete building manual is available under the "Files" tab.

This an RC Plane Crash featuring the E-flite Night Radian V2 RC Glider. It is a Maiden Flight Crash With Wild Bill Flynn! It is likely to be in an RC Plane Crash Compilation soon. Link to this Radian RC Glider: https://bit.ly/3RXGpAg The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc Bill put this plane in the for the first time along with his E-flite Ultrix 600mm BNF Basic while I flew my E-flite Turbo Timber Evolution with great success! This is how Horizon Hobby describes this Night Radian RC Sailplane: "Some fans of the first Radian 2.0m motor glider loved it so much, they added lights to continue flying at night. The E-flite team took note and added vividly colored, factory-installed LEDs throughout the airframe, offering the visibility and orientation needed to fly at dusk or even in total darkness with the original Night Radian. Now they've improved the popular model again by updating it with a modern, higher-visibility trim scheme and upgrading it with a telemetry-capable ESC. Using a compatible Spektrum AirWare equipped transmitter and Smart receiver (such as the AR631 included in the Bind-N-Fly Basic version), Night Radian 2.0m pilots can now view a variety of telemetry data in real time including motor RPM, current, overall battery voltage and more. These new capabilities make the Night Radian 2.0m an even better choice for your first or next glider — plus sport and night flying capable model too! Like the legendary E-flite Radian motor gliders that came before, the Night Radian 2.0m combines the serenity of soaring with incredible sport and night flying capabilities. It also starts a new chapter in the legend by updating it with a modern trim scheme and upgrading it with a telemetry-capable ESC. Add a compatible Spektrum AirWare equipped transmitter and Smart receiver — such as the AR631 included with the Bind-N-Fly Basic version — to view motor RPM, current, overall battery voltage and other telemetry data while you fly. High-visibility LED lights are factory-installed throughout the airframe and powered by your 3S 1300-2200mAh flight battery. They can be programmed to display 100+ different color, sequence, and timing combinations using the built-in controller for incredible visibility and easy orientation when turned on for flying at dusk or at night. The durable, composite-reinforced EPO airframe has been kept as light as possible to deliver long flight times up to 15-30+ minutes with or without power due to the efficient brushless motor and folding prop. You can enjoy soaring and sport flying in the same flight, or climb to find thermals multiple times between battery changes — aided by the proven aerodynamics of the efficient airfoil and the gracefully curved polyhedral wing. The BNF Basic version features exclusive AS3X technology for smoother performance in windy and high lift conditions, plus optional-use SAFE Select technology for even easier launches, flying and landings. It all adds up to make the E-flite Night Radian 2.0m the perfect "next step" after a trainer, an ideal first glider, or an outstanding everyday sport model for a wide variety of pilots interested in flying day and night"

This is my Maiden Flight with the Arrows RC SZD-54 2000mm RC Glider. Link to Arrows SZD Glider: https://bit.ly/3ia944U The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc Link to Spektrum AR620 Receiver: https://bit.ly/3Aay021 Other Arrows RC Planes: - Arrows RC Viper EDF Jet: https://bit.ly/2X5JFi2 - Arrows RC MiG-29 EDF Jet: https://bit.ly/2ZDmjBY - Arrows RC Marlin EDF Jet: https://bit.ly/2LUe4cN - Arrows T-28 Trojan RC Warbird: https://bit.ly/2LOr3N4 - Arrows P-51 Mustang RC Warbird: https://bit.ly/2LVGrak - Arrows F8F Bearcat RC Warbird: https://bit.ly/36zIjzq - Arrows Bigfoot RC Plane: https://bit.ly/2TJliVh Thanks to John for recording this flight for me. Here is a link to his YouTube Channel: https://www.youtube.com/user/JohnVH541 RC Sailplane Review Notes: Pros: - It is a no glue or screw snap together design. - Flaps pre-installed - Belly landing wheels - Metal aileron and flap spars - 3S Brushless motor - 2M wingspan to enjoy Cons: - Aileron rolls could have been tighter on high rates, but we can move in the servo holes for a snappier response. I am excited to see how this flies compared to my Skynetic Shrike & E-flite Night Radian. I also have the new E-flite UMX Radian on the way, so I will be gliding hard into the end of summer. This is how Hobbyzone describes this Powered RC Glider: "Arrows Hobby, after the success of trainers, warbirds, and jets, now brings you gliders. This first glider, the 2000mm SZD-54, has been thoroughly tested, and has been brought to you in it's best form. To achieve the best dihedral, the SZD-54 was designed with a specialized two-piece CNC threaded metal spar joiner- allowing the aircraft to maintain its wing geometry during demanding flight routines. Additionally, the pre-embedded carbon fiber spars in the fuselage and main wings ensure overall rigidity in high-G maneuvers. A high-quality 30A ESC paired with a 3136-KV1000 motor provides ample power with a 3S pack (1300mAh-2200mAh) to perform most aerobatic maneuvers. Positive and negative loops, stall turns, point rolls, and inverted flight can be easily and excellently performed. The wing and horizontal stabilizers are designed with a snap-fit structure, which can be installed by pressing and detached by pulling. No screws or glue necessary! This superb design makes transportation and storage easy. With the majority of the aircraft pre-assembled and no need for screws or glue, this aircraft can be built in as little as 3 minutes! Don't settle for any less than the best - Arrows Hobby 2000mm SZD-54. Features Powerful 3136-KV1000 motor with high-quality 30A ESC, 9g digital servos Snap together assembly, no screws or glue necessary Two-piece wing, two-piece CNC threaded metal spar joiner Folded propeller Functional flaps Belly landing wheel 85% factory assembled Recommended 3S 1300mAh-2600mAh Lipo pack provides 10-15 minute flight time. Made of highly durable EPO foam" #RCGlider #ArrowsRC #GBLynden

This is my Maiden Flight with the brand new H-King Galloping Ghost P-51 Mustang Reno Racer RC Plane from HobbyKing. Link to this Reno Aces P-51D Mustang: https://bit.ly/3jWYYnF The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc Thanks to John for recording this flight for me. Here is a link to his YouTube Channel: https://www.youtube.com/user/JohnVH541 This is how Hobby King describes their latest RC Racer: "The H-King P51 "Galloping Ghost" is the first in a new mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The P-51 "Galloping Ghost" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mah 4S lipo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace a really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch. The P-51 as a design has excellent flying qualities, but the H-King "Galloping Ghost" especially so. Its low drag design and generous wing section results in a model that really grooves and feels locked in at full power, but slow it down and it is a real pussycat too, and just as much fun. The stall is very benign, basically non-existent, the controls remain effective through the complete speed range, and aerobatics, it can do them all. Once you're done with your 6+min flight, fully flared landings are very easy to achieve and make belly landing the P-51 a pure joy. The full-size "Galloping Ghost" started life being supplied to the Army Air Force during World War II. Once the war was finished it was offered to the public as surplus stock in 1946, being sold for just $3,500. The plane was re-registered as NX7911 and named "Galloping Ghost" and was entered for the popular races that were being held in the States just after the war. In only its second outing in the Kendall Trophy race in 1947, pilot Steve Beville recorded the fastest ever closed-course speed with 384.6mph (619km/h). The Galloping Ghost changed hands (and names) several times over the following years, and had a period of not flying from 1990 to 2009. In 2010 it was made ready to compete in the 2011 Reno Races and was to be flown by Jimmy Leeward. Unfortunately during the race, the aircraft suffered a catastrophic elevator failure which led to it crashing and killing its pilot and spectators. This was a truly tragic closing chapter of the history of the full-size "Galloping Ghost", and one we should always remember. The H-King version of this classic racing Mustang comes "Plug N Fly" which means it has the motor, ESC, and servos pre-installed. The tough EPO foam is finished in the authentic silver color scheme of NX7911 "Galloping Ghost" with racing number 177. Assembly is very easy and straightforward with its one-piece wing and simple slot in horizontal stabilizer (no glue required). Other features are the substantially reinforced fuselage, plywood, and carbon are used to create a stiffened and strengthened fuselage, and motor box. Plastic skid plates are fitted to all the underside contact areas for protection when landing, and you are supplied with the option of both a clear, or a golden canopy to add the finishing touch to your Mustang. So to summarize, the H-King P-51 "Galloping Ghost" is fast out of the box with the pre-installed motor (optional 'Pro' motor available for even more speed), it has fantastic flying qualities with good fast and slow speed handling, is strong, and quick to assemble. It is a great contender for use at fun, club pylon racing events with the strength and maneuverability to do "Bank and Yank" pylon turns. A great, fun airplane that is brilliant to fly, looks fantastic in the air, and will have you smiling from ear to ear the whole time you are flying it. Features: • Up to 100mph on 'Stock' motor. 100+ mph speeds with optional 'Pro' motor • Reinforced EPO foam construction, lightweight, strong and stiff • Plastic skid plates to streamline and protect the airframe • Easy and quick assembly in just a few minutes • Easy to hand launch, super easy to belly land • Super stable at high and low speeds • Optional clear or golden canopy included"

This is my Unboxing & Review for the Arrows RC SZD-54 2000mm PNP RC Glider. Link to Arrows SZD Glider: https://bit.ly/3ia944U The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc Link to Spektrum AR620 Receiver: https://bit.ly/3Aay021 Other Arrows RC Planes: - Arrows RC Viper EDF Jet: https://bit.ly/2X5JFi2 - Arrows RC MiG-29 EDF Jet: https://bit.ly/2ZDmjBY - Arrows RC Marlin EDF Jet: https://bit.ly/2LUe4cN - Arrows T-28 Trojan RC Warbird: https://bit.ly/2LOr3N4 - Arrows P-51 Mustang RC Warbird: https://bit.ly/2LVGrak - Arrows F8F Bearcat RC Warbird: https://bit.ly/36zIjzq - Arrows Bigfoot RC Plane: https://bit.ly/2TJliVh RC Sailplane Review Notes: Pros: - It is no glue or screw snap together design. - Flaps pre-installed - Belly landing wheels - Metal aileron and flap spars - 3S Brushless motor - 2M wingspan to enjoy Cons: - Aileron rolls could have been tighter on high rates, but we can move in the servo holes for a snappier response. I am excited to see how this flies compared to my Skynetic Shrike & E-flite Night Radian. I also have the new E-flite UMX Radian on the way, so I will be gliding hard into the end of summer. This is how Hobbyzone describes this Powered RC Glider: "Arrows Hobby, after the success of trainers, warbirds, and jets, now brings you gliders. This first glider, the 2000mm SZD-54, has been thoroughly tested, and has been brought to you in it's best form. To achieve the best dihedral, the SZD-54 was designed with a specialized two-piece CNC threaded metal spar joiner- allowing the aircraft to maintain its wing geometry during demanding flight routines. Additionally, the pre-embedded carbon fiber spars in the fuselage and main wings ensure overall rigidity in high-G maneuvers. A high-quality 30A ESC paired with a 3136-KV1000 motor provides ample power with a 3S pack (1300mAh-2200mAh) to perform most aerobatic maneuvers. Positive and negative loops, stall turns, point rolls, and inverted flight can be easily and excellently performed. The wing and horizontal stabilizers are designed with a snap-fit structure, which can be installed by pressing and detached by pulling. No screws or glue necessary! This superb design makes transportation and storage easy. With the majority of the aircraft pre-assembled and no need for screws or glue, this aircraft can be built in as little as 3 minutes! Don't settle for any less than the best - Arrows Hobby 2000mm SZD-54. Features Powerful 3136-KV1000 motor with high-quality 30A ESC, 9g digital servos Snap together assembly, no screws or glue necessary Two-piece wing, two-piece CNC threaded metal spar joiner Folded propeller Functional flaps Belly landing wheel 85% factory assembled Recommended 3S 1300mAh-2600mAh Lipo pack provides 10-15 minute flight time. Made of highly durable EPO foam" #RCGlider #ArrowsRC #GBLynden

This E-flite P-51 Mustang 1.5M BNF Basic RC Warbird RC Plane With AS3X was flown at Warbirds Over Whatcom and brought to you by RECKEM ROYS RC & GBLynden's RC. Link to RC Mustang: https://bit.ly/3HWFRpL The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc - Horizon Hobby: https://bit.ly/3DcnYBV - Hobbyzone: https://bit.ly/3yjjcir - Tower Hobbies: https://bit.ly/3CBC4N1 - Amain Hobbies: https://bit.ly/3v44xGG - Amazon: https://www.amazon.com/shop/gblyndensrc Visit https://www.gblynden.com/ to learn more about the hobby! Here is Roy's channel: https://www.youtube.com/channel/UCA05tRhefR8Hpx3h-6fTIXw This is how Horizon Hobby describes this RC Warbird RC Plane: The Truman Senate War Investigating Committee called the North American Aviation P-51 Mustang “the most aerodynamically perfect pursuit plane in existence.” During WWII, it blasted trains, ships, and enemy installations throughout Western Europe. The “D” variant, outfitted with the legendary Merlin engine, gave the U.S. Army Air Forces a high-altitude, long-range fighter capable of escorting heavy bomber formations the entire way to Berlin and back. The E-flite P-51D Mustang 1.5m also goes the distance — to reproduce the famous fighter with exceptional detail, handling, performance and presence. It’s packed with Extra Scale details and functional features including LED lights, sequenced main and tailwheel gear doors, flaps and much more, and is also equipped with a Spektrum™ Avian™ Smart ESC to deliver an unmatched warbird flying experience. The P-51D Mustang 1.5m is the largest, most detailed and best performing replica of the legendary fighter from E-flite® yet! Along with an accurate outline, it also features an abundance of Extra Scale details including molded in panel lines and hatches, guns and removable drop tanks, plus a striking factory-applied “Lou IV” finish. Functional Extra Scale features include LED navigation lights, sequenced main and tailwheel gear doors, flaps and more. The shock-absorbing struts feature ball-bearing equipped wheels with diamond tread tires for added scale appearance and make it possible to fly from a variety of surfaces including grass, and reliable electric retracts operate the main gear and tailwheel. And at the heart of it all is a factory-installed brushless motor that’s compatible with 6S LiPo power—simply drop in a 6S 3200-7000mAh battery to achieve level flight speeds in excess of 80+ MPH and unlimited vertical performance! Both versions include a 100-amp Spektrum™ Avian™ Smart ESC, and the BNF® Basic version is also equipped with an AR637TA receiver that offers full-range telemetry including real-time battery voltage, current, temperature and more to compatible transmitters, plus the advantages of exclusive AS3X® and SAFE® Select technologies to make this one of the easiest to fly Mustangs ever. The unique 3-piece wing design makes transport and storage as convenient as possible because the center section includes the main gear and the outer panels simply snap into place securely without requiring fasteners. It’s also quick and easy to assemble because the factory-finished EPO airframe bolts together—no glue required—in less time than it takes to charge a battery. And it all adds up to deliver a warbird flying experience unlike any other with the mightiest Mustang yet!"

This is Tim's E-flite UMX Turbo Timber RC Plane Flight. Links to the E-flite Turbo Timber UMX: - Horizon Hobby: https://bit.ly/3ZRQJgA - Amazon: https://amzn.to/2unWuZu - Hobbyzone: https://bit.ly/2XkxnRH - Amainhobbies: https://bit.ly/3eFBJdz The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc RC Equipment: - E-flite Ultra Micro Turbo Timber: https://amzn.to/2unWuZu - Spektrum NX8 Radio: https://bit.ly/2SFAaXA - Nano-Tech 2S 300's: https://bit.ly/38UPu5w - UMX Floats: https://amzn.to/37ZpiWc - Smart Battery Checker: https://amzn.to/2ESwAyB Audio Gear: - Pro Grade Rode Lav Mic: https://amzn.to/3eQ0BSf - Rode Wireless Go: https://amzn.to/3iLB2CV Note: Coming soon are an Unboxing and Maiden Flight with the new E-flite Turbo Timber Evolution 1.5m BNF Basic EFL105250! Here are my Review Notes for this E-flite UM Turbo Timber: Pros: - Even with I prop I bent without knowing it before the maiden, it still flew really well! - Wheel plastic piece update over the first E-flite UMX Timber - It has a 3-bladed prop like the E-flite UMX Cirrus - A higher 3400kv brushless motor comes with it for more power - The plane can fly with 550’s as seen in some of my videos. - Its lights all over the plane are awesome! - The new chipset they use in this Timber UM allows for telemetry, just not the new advanced Smart Telemetry! Cons: - Longer nose compared to the original UMX Timber. - Shorter flight times compared to the Ultra Micro Timber. This is how Horizon Hobby describes this Ultra Micro RC Bush Plane: "The E-flite UMX Turbo Timber updates the original Timber with new features and more power - resulting in extreme aerobatic performance and incredible STOL (Short Take Off and Landing) capability in addition to legendary fly-anywhere versatility. Scaled down from the legendary E-flite Timber 1.5m, the E-flite UMX Timber was the iconic ultra micro model best-equipped for exciting STOL (Short Take Off and Landing) adventures and beyond…until now. The UMX Turbo Timber updates the original design with a modern turboprop-styled nose and 3-blade propeller, plus a higher-power 3400Kv brushless motor. When using the same 2S 280mAh batteries, this Turbo version provides even better STOL performance with shorter takeoffs and faster climbs. You'll also enjoy extreme aerobatic capabilities and have the power to hover, then climb out vertically. In the hands of experienced pilots, the UMX Turbo Timber can be flown in more places — even off of water with the optional floats (sold separately) — and in smaller spaces. Plus its high-wing configuration and exclusive optional-use SAFE® Select technology provide plenty of stability to make the UMX Turbo Timber a great choice if you've mastered flying at least one model before. This makes it a model that pretty much every pilot, from low-time to long-time experienced alike, should own because everyone will enjoy flying it! At the heart of the iconic UMX Timber model's evolution into the UMX Turbo Timber is the addition of a 3400Kv motor and a 3-blade prop. Always known as and still an easy-to-fly, smooth handling, STOL (Short Take Off and Landing) capable airplane, it now has the thrust — with the same 2S 280mAh batteries — to hover and climb out vertically. It can also perform inverted flight, knife edge, snaps, spins and other advanced aerobatic maneuvers with ease. Functional oversized flaps, plus optional-use leading edge slats, offer improved STOL and slow flight performance. Equipped with oversized tundra-style wheels like its predecessor, the UMX Turbo Timber can take off and land on grass and other rough surfaces better than ever before due to the updated landing gear design that secures the fairings to the fuselage. Experienced pilots can fly it indoors in spaces as small as a single basketball court, and almost anyone who's mastered flying at least one other airplane before can fly it successfully outdoors in large yards, small parks, sports fields, at RC flying fields and many other places. Install the optional floats (sold separately) and you can add large pools, small ponds, and lakes to your flying site options. Included LED landing, navigation and simulated strobe lights add to the fun and make it possible to fly from earlier to even later in the day. Best of all the UMX Turbo Timber arrives 100% factory-assembled — and is ready to fly as soon as you bind the installed Spektrum receiver to your compatible transmitter!" Also, look for videos of my Durafly Micro Tundra RC Bush Plane coming soon! #Eflite #UMXTurboTimber #GBLynden

This is my maiden flight with the brand new HobbyKing H-King Swiss Cub 1400mm RC Plane On 3S Power. Link to H-King Swiss J-3 Cub: https://bit.ly/3wEBojF The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc Flight Battery: - 3S 2200 Flight Pack: https://bit.ly/352DEXr Spektrum XBC100 Smart Battery Checker & Servo Driver: - Amazon: https://amzn.to/2ESwAyB - Hobbyzone: https://bit.ly/3hSUJqq - Amainhobbies: https://bit.ly/2XjRWPh Thanks to John for recording this flight for me. Here is a link to his YouTube Channel: https://www.youtube.com/user/JohnVH541 Hobby King describes this RC Cub Airplane like this: "This version of the popular Piper J-3 Cub is in a striking new Swiss color scheme which is a must for all scale pilots. This color scheme uses a lot less paint so there is a bit of a saving in weight which further reduces the already low wing loading. The attention to detail makes it an extremely realistic model, and it comes with a nice, generous size 1400mm wingspan. Like all Cub's with its large wingspan, and stable flying characteristics it is very easy to fly, perfect for low-hour pilots and experts alike. The Swiss Cub also has a new all-metal landing gear which is virtually indestructible, this will survive the hardest of landings. Further weight saving has been achieved by the removal of the metal tail bracing wires, these have been replaced with scale-looking, easy to fit, lightweight elasticated white shock chord. The Piper J-3 Cub is an American light aircraft that was built from 1938 onwards by the Piper Aircraft Company. It was designed to be lightweight and simple to build, would have good low-speed handling qualities, and have great short-field performance. Primarily the Cub was a trainer and gained great popularity in this role, but later on, it became well suited for a variety of military uses such as reconnaissance, liaison, and ground control roles. Putting the H-King Cub together is very simple with every component attached by screws, no glue is required except for some recommended reinforcement purposes. The 9g servos come pre-installed as well as the 45A ESC and powerful 3648-700KV brushless motor. The scale detail is exceptional with plastic injection molded parts used extensively throughout including the dummy engine, wing struts, molded glazing, and large “Cub” wheels. Practical features include the linked steerable tailwheel, large magnetic battery hatch, and the construction is from tough, lightweight, and easy to repair EPO foam. The H-King Swiss J-3 Cub is a genuine scale model of a full-size J-3 Cub and is easy to fly by pilots of all abilities including beginners. It is a fantastic-looking model and its unique color scheme makes it look impressive in both the air and on the ground. The Swiss Cub is fitted with a very versatile power train, you can fly it on a 2700mAh 3S which will give you long, lazy scale flights, install a 2450mAh 3S LiHv for sport flying (this is our favorite set-up), or step up to a 2200mAh 4S for a Cub that comes alive with plenty of power for some crazy, stunt flying. All this is achieved using the same motor, ESC, and prop, nothing requires changing. When it comes to performance the choice is yours, but be rest assured, whatever power you choose you will be really pleased with the performance of the H-King Swiss J-3 Cub. Included in the box are an FPV camera mount and a JST ESC to FPV equipment lead. This mount etc coupled with the crystal clear molded windscreen gives you the opportunity to experience HD scale FPV flying from the cockpit for the ultimate FPV experience. Features: • Authentic scale Swiss color scheme • Has realistic attention to detail • Virtually indestructible metal landing gear • Includes FPV mount and crystal clear windscreen for HD scale FPV flying • Excellent flying qualities and low-speed handling • Lightweight, tough EPO construction • Plug N Fly with pre-installed servos, motor, and ESC Specs: Wingspan: 1400mm (55”) Length: 950mm Flying weight: 1850g~1900g (depending on set-up) Wing loading: 56g/dm² Propeller: 12x6 ESC: 45A Motor: 3648-700KV brushless outrunner Servos: 4 x 9g Included: 1 x H-King Swiss J-3 Piper Cub complete EPO airframe 1 x 3648-700KV brushless motor (pre-installed) 1 x 45A brushless ESC (pre-installed) 4 x 9g servos (pre-installed) 1 x Complete hardware pack inc wheel Required: 4 Channel or greater transmitter and receiver 2200mAh~2700mAh 3s~4s LiPo Battery Thread locker glue Foam glue (optional) Suitable LiPo charger"

Wild Bill Flynn shows us his E-flite UMX Ultrix BNF Basic RC Plane. Links to the E-flite Ultrix: - Horizon Hobby: https://bit.ly/3EkjcSW - Hobbyzone: https://bit.ly/2YWAwJI - Amazon: https://amzn.to/31VRbgk - Amainhobbies: https://bit.ly/31ooTww The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc Visit https://www.gblynden.com/ to learn more about the hobby! Let me know if you would like me to review the new E-flite UMX Twin Otter on this channel. Recommended Battery: https://amzn.to/3bJHp5c Here are my Review Notes for this E-flite UM Ultrix: Pros: - Great speed - Fun 3D Style tricks & Highly Alpha/Harriers, etc. - A fair price for twin motors - 1S Brushless motors - Long flight times - The foam is thicker and more robust than other UMX Plane foam - Has a skid for protection when landing on pavement or grass - You can add lights - It comes in a small box, perfect to slide in your car on the days you fly big jets like the E-flite Su-30. Cons: - It is really small, but I could still see its orientation well overall - No wheels In closing, this could end up being my new favorite UMX RC Plane to rival the E-flite UMX Pitts and the E-flite UMX Timber original, but in a very different way. This is how Horizon Hobby describes this RC Airplane: "The Ultrix features a unique, all-new design that delivers a flight experience unlike any other, especially for models in the UMX (Ultra Micro eXtreme) class. This twin brushless motor-powered, delta wing airplane excels at smooth sport flying, basic aerobatics and even aggressive 3D — all in the same flight. Its incredible power-to-weight ratio provides hovering capability and unlimited vertical performance. Differential thrust adds yaw control and the ability to perform advanced aerobatic maneuvers including harriers, amazing flat spins and more. Plus EPP construction makes the Ultrix the most durable UMX model yet — ready to thrill RC pilots with more performance in more places and smaller spaces! The UMX Ultrix is a smooth handling, extremely versatile delta wing with aerobatic and 3D capabilities that you might not expect based on its looks alone. The twin brushless motors deliver an incredible power to weight ratio that offers good speed, plenty of power to hover and unlimited vertical performance. Differential thrust adds the ability to perform harriers, flat spins and more amazing aerobatics. And extremely durable EPP construction makes this one of the toughest ultra micro models yet. The Ultrix handles windy conditions well, aided by exclusive AS3X® (Artificial Stabilization – 3-aXis) technology that works behind the scenes to smooth out the effects of wind and turbulence for a locked-in feel — it’s like you're flying a much larger airplane. Optional-use SAFE® (Sensor Assisted Flight Envelope) Select technology makes the Ultrix easy enough for low-time pilots to enjoy, and the ultra micro size and lightweight construction are suited for flying almost anywhere. Skilled pilots can cut loose indoors in a space as small as a single basketball court, while large yards, sports fields and RC fields make ideal outdoor flying sites for just about everyone. Fully factory-assembled, the Ultrix is ready to fly within minutes of opening the box EFLU6450. Just add an affordable 1S 500mAh battery (EFLB5001S25) and bind it to a compatible Spektrum™ DSMX®/DSM2® equipped transmitter! You can even install the optional LED light kit (EFLU6455) for improved visibility during daylight conditions and to fly at night!" Look for more flights with my E-flite Su-30 Twin 70mm EDF Jet and the Maiden Flights of the E-flite UMX Turbo Timber BNF Basic (EFLU6950) Dude Perfect style coming soon! #Eflite #Ultrix #GBLynden

This is a video of Tim's Modified Arrows RC T-28 Trojan 1100mm PNP RC Warbird on a beautiful day! We both had fun flying our T-28's. I flew my E-Flite T-28 Trojan 1.1M BNF too, only that was off camera. Link to the Arrows T-28 Trojan: https://bit.ly/2LOr3N4 The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc Upgrades list: - Esc: Hobbywing Skywalker 50 amp esc 30216000: https://amzn.to/3g2VUV3 - Prop: APC 10x8 prop LP10080E (Spacer is required): https://amzn.to/3wNw9ic - Spektrum NX8 Radio: https://bit.ly/3gef3n5 Spektrum XBC100 Smart Battery Checker & Servo Driver: - Amazon: https://amzn.to/2ESwAyB - Hobbyzone: https://bit.ly/3hSUJqq - Amainhobbies: https://bit.ly/2XjRWPh Optional Battery (Not Used In This Video): - Ovonic 4s 2200 Lipo Flight Pack: https://amzn.to/3uEiN68 RC Equipment Used In This Video: - Spektrum NX8 Radio: https://bit.ly/3gef3n5 - Spektrum AR620 Receiver: https://amzn.to/2Lzf8BG This is how Hobbyzone describes this RC Plane: "The North American T-28 'Trojan', a piston powered two seater trainer aircraft, was the last piston powered trainer to enter service with the United States Air Force and Navy. Designed in the 1950's, this aircraft played a key role in helping pilots transition from basic trainers to jet aircraft. The T-28 version we are offering is based on a plane that was restored to airworthy in 1991-1994. It has the distinctive "Just Dreamin'" nose art as shown below. Our version has a separate decal of the nose art so it's up to you whether or not to apply it. The Arrows T-28 is one of the easiest flying aircraft on the market today. A beginner with basic flight experience could easily fly the T-28 with ease- without the assistance of a gyro system. Featuring a realistic three bladed propeller, rivets, panel lines, retracts, landing gear doors and functional flaps, the T-28 looks as real as its full sized counterpart. A powerful 40A ESC and 3536 850kV power system provides more than adequate thrust whenever necessary. The Arrows Hobby T-28 is a perfect aircraft for pilots transitioning from high winged aircraft and those who are looking for a scale aircraft that is easy to fly. Features: High power-to-weight ratio Realistic scale details Simple yet robust airframe Easy assembly No glue required Environmentally friendly water-based paint Includes: T-28 3536 850kV outrunner brushless motor (installed) 40A ESC installed Electronic retractable landing gear (installed) Servos (installed) Requires: 6-Channel radio transmitter 6-Channel receiver 3-Cell 11.1V 2200mAh LiPo battery 3-Cell compatible battery charger Needed to Complete 6 Channel radio transmitter 6 Channel receiver 3 Cell 11. 2200mAh LiPo battery 3 Cell compatible battery charger What's in the Box? T-28 3536-Kv850 outrunner brushless motor (installed) 40A ESC Electronic retractable landing gear (installed) Servos, installed) Specifications Wingspan1100mm (43.3in) Length915mm (36.0in) CG (Center of Gravity):45-50mm from leading edge Power System:3638-850kV Brushless Outrunner Motor Electronic Speed Control:40A Propeller / EDF:10 x 7 x 3 Servos9 gram servo X 7 Landing GearElectronic retractable main gear and steerable nose gear Required Battery:3S 2200mAh LiPo required Required Radio:6 Channel transmitter and receiver required Ailerons:Yes ElevatorYes RudderYes FlapsYes Lights:No Hinge Type:Foam Material:EPO Foam Skill Level:Intermediate Build Time:1-2 Hours Recommended Environment:Outdoor, 100 foot paved runway or short manicured grass" #ArrowsT28Trojan #RCWarbird #GBLynden

This is Tim's Modded Hobby King Durafly Tundra V2 1300mm Sports Model Flight With Mountain Views! Link to the Hobby King Tundra V2 Foam RC Plane: https://bit.ly/3eymcgz The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc Tim's Tundra Hop Up List: - Turnigy Aerodrive SK3-3542 1000kv: https://bit.ly/3zZhXEY - Avion 60amp Smart Esc SPMXAE1060: https://bit.ly/3h3fssJ - 2200-3300 4s lipo battery: https://bit.ly/30kHBUg - APC 12x6E propeller LP12060E: https://amzn.to/3xRvEnL - Night Timber X Wheels EFL5258: (Must build plastic spacers to fit axles width wise) - Hobbyking Spinner Spin-40-5: (Custom machining required. A true turn spinner is recommended). RC Equipment Used In This Video: - Spektrum NX8 Radio: https://bit.ly/2SFAaXA - Spektrum AR620 Receiver: https://amzn.to/2Lzf8BG Spektrum XBC100 Smart Battery Checker & Servo Driver: - Amazon: https://amzn.to/2ESwAyB - Hobbyzone: https://bit.ly/3hSUJqq - Amainhobbies: https://bit.ly/2XjRWPh Video Equipment Used To Make This Video: - Video Camera: https://amzn.to/3xRwMI1 - SanDisk Extreme Pro: https://amzn.to/3h2frFA This is how HobbyKing describes this legendary Foam RC Bush Plane: "The Tundra has firmly established itself in the RC community and has now become the go to model for most RC pilots. From intermediate pilots to the more experienced flier this plane will do it all. The Tundra is an extremely versatile plane that is great fun to fly and is highly entertaining for all pilots with its excellent aerobatic potential, STOL flying ability and all round toughness. The Tundra V2 has had further improvements over the upgraded original version. Vortex generators have now been added to the leading edge of the wing to increase the stability at slow speeds. The undercarriage is now more secure and easier to install thanks to machine screws and brass inserts, the plastic landing gear cross brace mount is now made of metal for improved durability. Also included is a newly designed battery tray. The V2 still retains the improved wing connectors, wing mount, upgraded motor and Aerostar 40 amp ESC with reverse. Whether it is flying from rough fields, water, snow or sand, the Tundra takes it all on with ease. The Tundra has a wide flight envelope making it ideal for FPV flying, aerobatics, glider towing, candy dropping or just good old-fashioned super STOL slow flying, The tough EPO foam construction is beautifully finished and the Tundra design has a purposeful rugged look. Its lightweight design coupled with a powerful brushless set-up instantly gives you a feeling of confidence on the sticks as quickly as it puts a smile on your face. This rugged and reliable plane can also get into those tight and hard to land places with its huge flaps, vortex generators and extreme STOL performance. The large main wheels make it easy to land just about anywhere. Swap out the wheels for the supplied floats and you'll be flying from lakes, streams and other waterways. A quick change to the included FPV canopy will give you more extreme fun flying. More excitement can be found utilizing the built-in tow fitting for towing your friend’s gliders to the best thermals. Simply put the Tundra is an immense amount of fun to fly and you will be in the air very quickly due the very straightforward and speedy assembly process. Take on the very best mother nature can throw at you and still come up smiling. With the Tundra, there are no limits! Features: • Fast and easy assembly • Two-piece wing with dedicated wing connectors • Beautifully molded, rugged EPO construction • Pre-installed 3S powertrain offering near vertical performance • Bush-style landing gear with huge molded foam rubber wheels and improved metal cross brace mount • 'Barndoor' style flaps and vortex generators for true STOL performance and super slow flight • FPV canopy tray, floats and water rudder included Specs: Wingspan: 1300mm (51") Length: 920mm (36.25") Wing Area: 26dm2 Flying Weight: 1150g Number of Channels: 5 (throttle, ailerons, elevator, rudder, flaps) Motor: 3636-900Kv Brushless outrunner ESC: Aerostar 40amp Brushless ESC w/reverse Servos: 6 x 9g Prop: Durafly Carbon Fiber 12"x6” Includes: Motor, ESC, Servos All hardware Instructions Floats and FPV canopy Requires: 6-7CH transmitter/receiver 3S 11.1V 1300~2200mAh LiPoly battery (30C min) Optional: FPV Gear This Tundra model flies WAY better across the board than the new Durafly Micro Tundra. #DuraflyTundraV2 #HobbyKing #GBLynden

This is an HSDJets D400 3D RC Plane Flight Review By RECKEM ROYS RC & GBLynden's RC. Visit https://www.gblynden.com/ The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent: https://www.amazon.com/shop/gblyndensrc or visit https://www.gblynden.com/. - Spektrum DX6 Radio: https://amzn.to/2FojzOP Visit Roy's channel here: https://www.youtube.com/channel/UCA05tRhefR8Hpx3h-6fTIXw After looking at this plane and watching Roy fly it, I am not considering possibly getting an HSD Jets Cessna 182 or maybe even the HSD Jets T-33! This is how HSDJetsUSA describes this HSD Jets D400 3D Stunt Plane: "PACKAGE INCLUDES: Fuselage×1 Left Wing×1 Right Wing×1 Left Horizontal Stabilizer×1 Right Horizontal Stabilizer×1 Winglets×2 Main wing carbon tube L=410mm external diameter 16mm×1 Horizontal Stabilizer tube L=405mm external diameter 6mm×1 Front landing gear ×1 Accessories Bag 1 ×1 Control rod (SUS304Ф1.5×90mm)×1 Screw (PM3×10mm)×4 (Front landing gear) Screw (PA2×6mm)×2 (Front landing gear fixing plate) Screw (PA3×15mm)×4 (Winglets) Manual×1 REQUIRES: 4 channel radio system(radio & receiver) (required & not included) 3S,11.1V,2200mAh,LiPo with XT60 type plug(required & not included) LiPo battery charger (required & not included)" #HSDJets #GBLynden #3DRCPlane