Caterpillar D4, #6U2304 Pony Motor Tune Up, Part 5: Magneto Install and Component Prep
Kept you waiting, huh? Sorry it took so long to get back to this. My plan is to have it running before the end of the year.
Squatch253 Channel: UCv_zjUQJ98JgBHcch2PP7Vw
Video of Squatch rebuilding a pony motor governor: https://youtu.be/LLNnH6ZCrSg?si=fmyHHacogiOPg_Fa
2
views
2007 Mazda CX-9: Front Door Window Motor and Regulator Replacement
Adept Ape's Channel:
https://youtube.com/@AdeptApe?si=wO2ewKpvFTM_YaXg
Parts I used:
- Front Left (driver's) motor/regulator assembly: https://www.rockauto.com/en/moreinfo.php?pk=12492185&cc=1434578&pt=15596&jsn=316
- Front Right (passenger's) motor/regulator assembly: https://www.rockauto.com/en/moreinfo.php?pk=12492189&cc=1434578&pt=15596&jsn=318
4
views
No more 6.4? Where are the Powerstroke videos? This should explain..........
You are free to lift your truck, but you are not free from me criticizing it.
2
views
Versatile 800 Plowing (short) #farming #tractor #diesel
Series I Versatile 800 pulling a White 449, 8 bottom plow. The tractor got a good workout today, some of the spots in this little field were quite hard.
Here's a slightly longer video, if you're interested: https://youtu.be/lu4Ld_iU34k
Hillbilly Seed Tube Repair, for John Deere 8350 Grain Drill
It's called discharge hose, and I could not think of the name while recording this.
Krause Chisel Gets a Weight Upgrade
More interesting content on the way, once it cools off outside. I don't work in 100+ degree weather unless I have to. Humidity doesn't help
2000 Ford Excursion w/V10: Replacing Fan Clutch
Fan Clutch:
https://www.rockauto.com/en/moreinfo.php?pk=1149517&cc=1358096&pt=6812&jsn=327
2000 Ford Excursion w/V10: Oil Sensor Replacement
Oil Sensor/Switch: https://www.rockauto.com/en/moreinfo.php?pk=11175653&cc=1358096&pt=4588&jsn=353
Oil Sensor/Switch Connector: https://www.rockauto.com/en/moreinfo.php?pk=508193&cc=1358096&pt=2603&jsn=482
There are other options that are cheaper for both of these parts, I just like recommending Motorcraft parts whenever I can.
2
views
Bobcat T200: Steering Pintle Lever Replacement
That big spring with the long bolt is a real pain to get back on.
Part Numbers:
- Pintle Lever: 6729956
- Torsion Bushing: 6685060
Links:
- Parts Catalog: https://partscatalog.bobcat.com/
- Parts Sales: https://shop.bobcat.com/
Replacing Bearings in a Sunflower Disc
Bearings: https://thebigbearingstore.com/gw211ppb13-disc-harrow-bearing/
Bearing Flanges: https://thebigbearingstore.com/4-bolt-flange-housing-for-100mm-od-bearings/
I know the channel hasn't been exciting as of late, but bear with me. I've got a lot of stuff planned, but external factors are working against me.
Grazer G2297K Revival, Part VII: Finishing Touches, Deck Installation, and Test Run!
She ran well, what for having sat so long and all. I was done mowing in about 1/3 of the time it took me with the lawn tractor, and that's including the time it took me to put that spindle shaft back in. Outstanding machine.
I'm gonna try and get the review video out in a week or two. It's a very wet spring this year, so there'll be no shortage of grass for me to cut.
Here's the part number(s) for that PTO switch:
- Stens 430-514
- John Deere AM101562
I have no clue if either of those will actually work, it just looks like they will.
Grazer G2297K Revival, Part VI: Painting and Assembling the Mower Deck
The next installment of this series should be a bit more exciting
Part Number Cross Reference (Grazer to other)
- C46687 (deck idler, flat).......AYP/Electrolux 532196106
- C37935 (deck belt).......Use 1/2"x 122-3/4" V-belt
- C14482 (deck tension spring).......No specific part number; I ended up using a #168 (or 169, can't remember which) extension spring. It's far from perfect, but it has held up alright so far.
- C44136 (mower blade).......I have not found a replacement that will 100% work. Honestly, your best bet is to search for a universal blade that would fit.
Dimensions of specific aforementioned parts:
Deck flat idler(s):
- Diameter: 5-1/2"
- Width: ~1-1/2" or so
- Bore: 3/8"
Mower blade(s):
- Length: 18"
- Width: 2-1/2"
- Center to center distance between mounting holes: ~3-3/4"
Parts:
https://www.caseingersollparts.com/store/c1/CASE_AG_%2F_CONSTRUCTION.html
Part Diagrams:
https://www.rottmansales.com/parts/ingersoll-case/front-cut-mowers/grazer/325/
8
views
Grazer G2297K Revival, Part V: Spindle Rebuild and Gearbox Pulley Replacement
Easier said than done, apparently. Yeeesh.
Part Number Cross Reference
C37931 (Spindle pulley).......6204K266 (McMaster-Carr)
C37932 (Gearbox, output pulley).......6204K265 (McMaster-Carr)
C46686 (Spindle bearing).......Fafnir RA100RR, or CSA205-16 ("SpinCo" brand, from Carnell Sales/Big Bearing Store)
Dimensions of aforementioned pulleys:
C37931:
- Dia: 5"
- Width: 1", ~1-1/2" overall
- Bore: 7/8" (keyed)
C37932:
- Dia: 5"
- Width: 1", ~1-1/2" overall
- Bore: 3/4" (keyed)
Parts:
https://www.mcmaster.com/
https://www.caseingersollparts.com/store/c1/CASE_AG_%2F_CONSTRUCTION.html
https://thebigbearingstore.com/
Part Diagrams:
https://www.rottmansales.com/parts/ingersoll-case/front-cut-mowers/
5
views
Grazer G2297K Revival, Part IV: Fuel System and Test Fire Struggles
I swear I know what I'm doing, this is how all my projects go. Even down to the small ones. Everything is a struggle and a fight. In the end, I won, so that's all that matters. ALSO, the connectors used on this mower are "Delphi 56 Series" which may also be called "Packard" connectors.
Parts:
Starter (only buy the OEM, because none of the aftermarkets have 9 tooth pinions): Kohler 2509824S (old part # is 2509821S)
I purchased my starter here: https://www.walmart.com/ip/Kohler-25-098-24-S-Electric-Starter-Replaces-25-098-20-S-25-098-21-S-OEM/624571607?from=/search
Parts:
https://www.caseingersollparts.com/store/c1/CASE_AG_%2F_CONSTRUCTION.html
Parts Diagrams:
https://www.rottmansales.com/parts/ingersoll-case/front-cut-mowers/
3
views
Grazer G2297K Revival, Part III: Body Installation and Wiring Debacle
The starter did need replacing after all, but that is a topic for the next video
General Parts and Parts Info:
https://www.caseingersollparts.com/store/c1/CASE_AG_%2F_CONSTRUCTION.html
Parts Diagram Download(s):
https://www.rottmansales.com/parts/ingersoll-case/front-cut-mowers/grazer/325/
1
view
Grazer G2297K Revival, Part II: PTO Clutch Redo and Engine Installation
What a production.............
Part Number Cross Reference (Grazer to other brands)
C45121.......MTD 756-04224
C25370.......Stens 280-731
C15672.......Phoenix PHX31225100 (Type FI-225-100), or Stens 280-255 (not 100% sure about the Stens)
Transmission Drive belt is a 1/2"x32" V-belt
Parts Resources:
https://www.caseingersollparts.com/store/c1/CASE_AG_%2F_CONSTRUCTION.html
https://www.jackssmallengines.com/
Part Diagrams:
https://www.rottmansales.com/parts/ingersoll-case/front-cut-mowers/grazer/325/
3
views