NTR - Restorations, Crafts and Beer

#restoration #antique #punch Hey if you want to support me, you can become my patreon or invite me for a virtual beer: Paypal: paypal.me/NTRBeer Patreon: https://www.patreon.com/notterriblerestorations Hello, glad you are visiting my channel. In this video I restore a paper punch. I saw the old hole punch and was immediately fascinated by the extremely functional design. The entire mechanism is exposed and very demonstrative. Unfortunately, the beautifully exposed mechanism is heavily rusted and no longer fully functional. The punch was manufactured by Henssson, an office supplies company that produced in Weimar, Germany around the 1910s. The restoration of the antique office article I started as always with the complete disassembly. During the disassembly, I noticed that all the rusty mechanical parts were once nickel plated. This is clearly visible from the flaking coating that is eroded by the rust. After disassembly, I once again had the parts sandblasted by mister patina. The sandblasting was very time consuming because the punch was not painted but had a japanning coating. This very complex technique was very often used at the beginning of the 20th century, such as for writing and sewing machines. The technique was intended to imitate the deep black coating of Japanese imports and has its origins in the 17th century. For japanning, a mixture of tar, turpentine and linseed oil is mixed and, after a long curing period, applied by brush and then baked in the oven. The baking itself is carried out in several steps and is extremely time-consuming. It was particularly important to me to preserve the antique charm of this object and therefore I decided to renew the japanning and not to paint the punch. I have also completely renewed and polished the nickel plating on the mechanical components. The result is that the punch shines in a completely new brilliance. the techniques used make it possible to imagine that the punch is back as it was more than 100 years ago in an office shop window. I hope you have fun with the video. Feel free to ask questions. If you like it, please LIKE and SHARE the video. If you would have done something differently, let me know in the comments 00:00 - Intro 00:56 - Disassembly 03:19 - Sandblasting 04:32 - Preparation Japanning 05:50 - Japanning Mix & Process 07:23 - Preparation Nickel Plating 08:27 - Nickel Plating 10:17 - Brass Locking Rings 11:18 - Woodwork 13:15 - Beer Tasting 14:19 - Assembly 18:06 - Results Music: Intro: Elegant Logo by Free Music | https://soundcloud.com/fm_freemusic Music promoted by https://www.free-stock-music.com Creative Commons Attribution 3.0 Unported License https://creativecommons.org/licenses/... Result Scene: Timeless - Lauren Duski from Youtube audio library

#restoration #antique #grinder Hey if you want to support me, you can become my patreon or invite me for a virtual beer: Paypal: paypal.me/NTRBeer Patreon: https://www.patreon.com/notterriblerestorations In this restoration, I started with a very old and rusty grinder that I found in the junk department on ebay classifieds. The mechanics of the grinder was still intact and it could be turned freely with some force, but some parts on the grinder were replaced provisionally. As usual, I started the restoration by first completely disassembling the antique tool. This worked surprisingly well, despite all the rust almost all the screws could be loosened. I only had to cut one screw loose and replace it later with a custom one. Both a piece of paper with old German writing and a D.R.G.M (Deutsches Reichs-Gebrauchsmuster) stamp suggest that thehand cranked grinder was made before 1941. Somewhat in the 1930's I would judge by its appearance. Unfortunately, a stamp could not be found. After I carefully cleaned everything, the parts were sandblasted. Since I don't have access to a sandblaster at the moment, Mister Patina helped me out. In exchange for an old piece of wood and a beer, he sandblasted all the parts for me and sent me his own little restoration video. I then sorted the components of the old tool and partially cold blued, hot blued, polished or painted them. My goal in the restoration was to accentuate the sweeping tool body with a powerful color and restore it to perfect condition. The attachments in turn had to be preserved to indicate their age. A few polished highlights round out the overall look and emphasize the functional aesthetics of days gone by. Once again, I had a lot of fun with this restoration project and I'm happy to share the result with you. If you like it, please LIKE and SHARE the video. If you would have done something differently, let me know in the comments. 00:00 - Intro 00:47 - Disassembly 03:43 - Cleaning 04:00 - Sandblasting 05:27 - Paint Job 07:33 - Hot-Bluing 08:46 - Cold-Bluing 09:43 - Polishing 14:38 - Re-Shaping a Grinding Stone 15:08 - Beer Tasting 16:06 - Assembly 18:34 - Results Music: Intro: Elegant Logo by Free Music | https://soundcloud.com/fm_freemusic Music promoted by https://www.free-stock-music.com Creative Commons Attribution 3.0 Unported License https://creativecommons.org/licenses/... Result Scene: Timeless - Lauren Duski from Youtube audio library

Hey if you want to support me, you can become my patreon or invite me for a virtual beer: Paypal: paypal.me/NTRBeer Patreon: https://www.patreon.com/notterriblerestorations In this video I am setting up a workshop in the basement room I renovated. The final transformation includes the restoration and installation of workbenches, a fine work table, a storage corner and a tool sorting system. The project once again took more time than expected, but it was extremely satisfying to complete the man cave. I am looking forward to working on restorations again from now on and to switch the focus from the whole room to unique objects. Thank you for sticking with me through to this point and motivating me daily with your lovely comments. Without you I would not have had the courage to rent, renovate and set up my own workshop. Special thanks to my wonderful friends who donated awesome workbenches to make the setup possible. 00:00 - Intro 00:07 - Introducing the workbenches 01:16 - Workbench cleaning 01:41 - Preparing a countertop 03:19 - Repainting of workbench I 05:28 - Building up workbench II 08:33 - Organizing the tools 10:30 - Vise wedding ceremony 11:18 - Setting up workbench II 11:54 - Order for screws nuts and dowels 12:30 - Installation of storage (Stopmotion) 13:19 - Beer Tasting 14:19 - Finishing Touches 14:54 - Result Music: Intro: Elegant Logo by Free Music | https://soundcloud.com/fm_freemusic Music promoted by https://www.free-stock-music.com Creative Commons Attribution 3.0 Unported License https://creativecommons.org/licenses/... Wedding Scene: Performer: European Archive Song: Wedding March Composer: Felix Mendelssohn Licence: The song is permitted for commercial use under license "Public Domain Mark 1.0" Stopmotion: Home – Komiku from soundtrack of the game Captain Glouglou's Incredible Week Result Scene: Your Lullaby - Per-Olov Kindgren & The Gaugolon Orchestra with friendly permission by: Per-Olov Kindgren https://www.youtube.com/channel/UCDDq... Jimmy Quango https://www.youtube.com/channel/UCDTh... and The Gaugolon Orchestra https://soundcloud.com/gaugolon.

Hey if you want to support me, you can become my patreon or invite me for a virtual beer: Paypal: paypal.me/NTRBeer Patreon: https://www.patreon.com/notterriblerestorations In this video I am not restoring a tool, but the room I want to use as a workshop from now on. The old brick walls are damp and crumbling and urgently need a new plastering. So a renovation is necessary. And I have to do this basement renovation on a budget. Preparing the room for its future use is a necessary part of the workshop build. After I painted the room, I also prepared the electrical system for future use and installed enough sockets for my tools and much more light to improve the video quality for this channel. I would like to take you with me on this journey and I hope that you also like a renovation for a change. I would be happy if you subscribe to my channel so that you don't miss the second part where i will set up the workshop. 00:00 - Intro 00:07 - Clean Out 01:08 - Testing Lime Plaster 01:59 - Preparing the Room 03:26 - Plastering 04:37 - Painting 06:08 - Fixing the Drain with Concrete 07:30 - Electric Installations 13:34 - Wash Basin Installation 13:48 - Painting the Floor 14:17 - Beer Tasting 15:30 - Finishing Touches 16:01 - Result Music: Intro: Elegant Logo by Free Music | https://soundcloud.com/fm_freemusic Music promoted by https://www.free-stock-music.com Creative Commons Attribution 3.0 Unported License https://creativecommons.org/licenses/... Result Scene: Your Lullaby - Per-Olov Kindgren & The Gaugolon Orchestra with friendly permission by: Per-Olov Kindgren https://www.youtube.com/channel/UCDDqkaWL07KgtYAUivbyBgg Jimmy Quango https://www.youtube.com/channel/UCDThF_XBdrXvES9DFWwdLnQ and The Gaugolon Orchestra https://soundcloud.com/gaugolon.

Hey if you want to support me, you can become my patreon or invite me for a virtual beer: Paypal: paypal.me/NTRBeer Patreon: https://www.patreon.com/notterriblerestorations In this video I restore a german grease gun from Robert Seifferman Frankfurt. The antique tool is made entirely of brass. The vintage tool is made around the year 1900 and in fairly good condition, therefore I do a very gentle restorations with a focus on deep cleaning and polishing brass. The tool is a gift for Mister Patina. His channel and inspiring work is always worth a click. I found the grease gun in the cellar which I recently rented as my new workshop. I am glad that the project was not too complex, as i am currently very busy with the renovation of the new workshop. The beertasting this time is personell, because I try a beer from my hometown. So I'm happy the project is done and the video is ready. I hope you enjoy my content. Please subscribe, if you want to see my future work. 00:00 - Intro 00:07 - News about the Workshop 02:12 - Disassembly 04:32 - Cleaning 05:41 - Close Up's 06:40 - Sanding and Brushing 08:48 - Polishing Brass 10:38 - Beer Tasting 12:06 - Assembly 15:09 - Result Music: Intro: Elegant Logo by Free Music | https://soundcloud.com/fm_freemusic Music promoted by https://www.free-stock-music.com Creative Commons Attribution 3.0 Unported License https://creativecommons.org/licenses/... Work Shop Movie Intro made with makermoon.com: The new order – Aaron Kenny from Youtube audio library Stopmotion Scene: Garage – Monplaisir from Turbo Rallye Clicker 4000 Soundtrack Result Scene: Timeless - Lauren Duski from Youtube audio library

Hey if you want to support me, you can become my patreon or invite me for a virtual beer: Paypal: paypal.me/NTRBeer Patreon: https://www.patreon.com/notterriblerestorations In this video I restore a wrought iron screwdriver. The antique tool is partially forged. It is very rusted and cracked on several spots. A tool restoration is necessary. I got it for a small fee on eBay. The restoration includes woodcarving and polishing sequences. It was a lot of fun, but way more work than expected, since I got some route blocks on the way. I think the result looks somewhat medieval, but see for yourselfs. Thee beertasting is an oktoberfest special of course! So I'm happy the project is done and the video is ready. I hope you enjoy my content. Please subscribe, if you want to see my future work. 00:00 - Intro 00:49 - Disassembly 02:28 - Derusting with Electrolysis 05:10 - Preparation and Welding 06:25 - Woodworks 09:24 - Epoxy Casting 11:27 - Metalworks 13:54 - Polishing 14:58 - Beer Tasting 16:14 - Assembly 17:58 - Result Music: Intro: Elegant Logo by Free Music | https://soundcloud.com/fm_freemusic Music promoted by https://www.free-stock-music.com Creative Commons Attribution 3.0 Unported License https://creativecommons.org/licenses/... Stopmotion Scene: Towel Defence OST by sawsquarenoise Result Scene: Timeless - Lauren Duski from Youtube audio library

Hey if you want to support me, you can become my patreon or invite me for a virtual beer: Paypal: paypal.me/NTRBeer Patreon: https://www.patreon.com/notterriblerestorations In this video I again protect tools that didnt age the way they deserved. This time I restore an old and huge german goliath vise. The antique tool is a Goliath 150 and was preowned by a hobby blacksmith. I got it for 20€ on eBay. I need the vise restoration for future projects. Mid restoration I realized, that the vise was never the very best quality, the cast was very inaccurat and it probably wasnt post-processed after casting. Thats why I decided, that I have to make this vise extra special. It needed as much attention as possible. The whole process took me a approx. a week. But I had to wait for some parts for much more time. So I'm happy the project is done and the video is ready. I hope you enjoy my content. Please subscribe, if you want to see my future work. 00:00 - Intro 00:31 - Disassembly 04:14 - Metalworks I 05:08 - Sandblasting 05:55 - Preparation and Hot Blueing 07:03 - Metalworks II 09:50 - Polishing 10:44 - Preparation and Paint Job 13:05 - New Jaws 14:18 - Beer Tasting 15:41 - Assembly 18:08 - Result Music: Elegant Logo by Free Music | https://soundcloud.com/fm_freemusic Music promoted by https://www.free-stock-music.com Creative Commons Attribution 3.0 Unported License https://creativecommons.org/licenses/... Result Scene: Timeless - Lauren Duski from Youtube audio library

Hey if you want to support me, you can become my patreon or invite me for a virtual beer: Paypal: paypal.me/NTRBeer Patreon: https://www.patreon.com/notterriblerestorations Hello and welcome back to my channel. In this restoration video I will restore two pairs of 100 year old tailor scissors. I do the restoration on special request of my girlfriends dad. After he saw my first restoration video he gave them to me and asked me if I could save them. He got them from his grandfather who was a tailor all his life in the pre 50s time. These scissors are the only inheritance that remind him of his grandfather. This project was a lot of fun and I enjoyed working on it. Subscribe and share, if you like the video. 00:00 - Intro 00:59 - Disassembly 02:10 - Cleaning 03:24 - Derusting with Electrolysis 04:55 - Metalworks I 07:15 - Cutting Threads I 07:57 - Polishing I 09:17 - Preparation and Paint Job I 11:10 - Cutting Threads II 11:51 - Metalworks II 12:37 - Polishing II 13:35 - Paint Job II 14:15 - Beer Tasting 15:30 - Assembly 16:49 - Result Music: Elegant Logo by Free Music | https://soundcloud.com/fm_freemusic Music promoted by https://www.free-stock-music.com Creative Commons Attribution 3.0 Unported License https://creativecommons.org/licenses/...

Hey if you want to support me, you can become my patreon or invite me for a virtual beer: Paypal: paypal.me/NTRBeer Patreon: https://www.patreon.com/notterriblerestorations Hello, this is the first video of my channel and my first video documented restoration. The very dirty and slightly rusted oil lamp belongs to my friend. He got the lamp from the owner of an irish pub, in which it was part of the decoration. The lamp was bought and produced in the 50s in former Czechoslovakia. I hope you enjoy the video and you decide afterwards to subscribe to my channel. Stay healthy! 00:00 - Intro 00:30 - Disassembly 04:05 - Cleaning 05:07 - Sandblasting 06:25 - Metalworks 08:24 - Cold Blueing 10:03 - Nickel Plating 10:49 - Paint Job 14:09 - Beer Tasting 15:19 - Assembly 18:52 - Result Music: Elegant Logo by Free Music | https://soundcloud.com/fm_freemusic Music promoted by https://www.free-stock-music.com Creative Commons Attribution 3.0 Unported License https://creativecommons.org/licenses/by/3.0/deed.en_US