Upgraded KC02 : Airsoft DMR Gameplay Montage
Patch links at bottom of description.
This footage is from three games, two different internal mods on the rifle, one HPA and one CO2... whose aftermarket parts are labeled respectively as 1 and 2 below. For the time, I prefer the CO2 setup, for the ability to use the R-Hop ... The HPA adapter I use is not compatible with the TopHat hop chamber, which is why i have the stock hopup when using HPA.
1. Tanukiworks HPA + magazine adapter
Matrix Short Type 65 Round AEG Midcap mp5 magazines
Stock hopup, bucking and RA Tech 6.01mm 510mm inner barrel
Angel High Output Valve
ninja tank with Redline Airsoft SFR ( Super Fast Refresh) Air System Regulator
2. CO2 mags,
Tophatrunner AEG Barrel Hopup conversion
6.03 x Prometheus barrel with R-Hop installed by Umbrella Armory
flathop bucking
*both setups have RogueWorx piston. externals are aftermarket outer barrel with barrel extension, 3x optic, and the minimalist stock. And a quick duracoat job done in house. All BBs are 0.32g and .36g from High Power.
Sidearm is a mostly stock VFC M&P. with steel hammer and hammer group parts, replaced hammer spring. I love this pistol, even for its faults. Slide and grip also duracoated in house. Matrix Hardshell Adjustable Holster.
Belt rig is the LBX Assaulter belt, and favorite camos a mixture of LBX Caiman/Grey/Snow Raptor. and some old surplus digital woodland. Pouches are a mismatch of velcro pistol mag pouches, I've found the Condor ones to work well, as the longer flap can fit the kc02 magazines and still close securely, also they're cheap and pretty durable.
Cameras are both Drift Stealth 2, one mounted on left side of mask and the other mounted over the scope with a 7x zoom in front (self-rigged).
**working on a KC02 loadout and gear video, if anyone would be interested in that. I have been troubleshooting and modifying this whole setup quite a bit over time.
â—‡LINKS TO AMAZON TO ORDER PATCHESâ—‡
Grey HannyaMask:
https://www.amazon.com/Hannya-Morale-...
Red Hannya Mask:
https://www.amazon.com/Hannya-Morale-...
Bloody Panda:
https://www.amazon.com/Angry-Morale-T...
Angry Panda:
https://www.amazon.com/Angry-Morale-T...
137
views
2
comments
Upgraded KC-02 : Airsoft DMR Gameplay Montage #2
Cover photo from in-game footage,, taken by Brandon Wilbanks of Bad Action and Still Shots.
Here is some footage I overedited again. Couple shots from Ironsight, our original field, then a couple of games at Game2Life, our new field in Lake Charles. Happy to see alot of the same faces again at the new spot, alongside some new folks as well.
* The KCO2 mods and other gear:
all CO2 mags,
Tophatrunner AEG Barrel Hopup conversion
6.03 x Prometheus barrel with R-Hop installed by Umbrella Armory
flathop bucking
* RogueWorx piston. externals are aftermarket outer barrel with barrel extension, 3x optic, and the minimalist stock. And a quick duracoat job done in house. All BBs are 0.32g and .36g from High Power.
Sidearm is a mostly stock VFC M&P. with steel hammer and hammer group parts, replaced hammer spring. I love this pistol, even for its faults. Slide and grip also duracoated in house. Matrix Hardshell Adjustable Holster.
Belt rig is a Matrix TMC gen2, cheap and easy to modify... the suspenders are really nice for outdoor with lots of running, since all of my mags and gear are on the belt. Pouches are a mismatch of velcro pistol mag pouches, I've found the Condor ones to work well, as the longer flap can fit the kc02 magazines and still close securely, also they're cheap and hold up well. I went super budget on my first airsoft gear, and found ways to make it work. I also huse a much nicer LBX belt loadout, which will be linked in other vids. I'd recommend using whatever doesn't make you hesitate from fear of getting your Guccis dirty lol.
Cameras are Drift Stealth 2, one mounted on left side of mask and the other mounted over the scope with a 7x zoom in front (self-rigged). Last camera just gets lashed to the barrel haphazardly with camoform self-adhesive material. The camera gear I am slowly upgrading, scopecam setup and the poor exposure settings are being addressed.
**working on a KC02 loadout and gear video, if anyone would be interested in that. I have been troubleshooting and modifying this whole setup quite a bit over time.
â—‡LINKS TO AMAZON TO ORDER PATCHESâ—‡
Grey HannyaMask:
https://www.amazon.com/Hannya-Morale-...
Red Hannya Mask:
https://www.amazon.com/Hannya-Morale-...
Bloody Panda:
https://www.amazon.com/Angry-Morale-T...
Samurai:
https://www.amazon.com/Samurai-Morale...
Mostly Peaceful Lasercuts:
https://www.amazon.com/Lasercut-Moral...
and
https://www.amazon.com/Lasercut-Peace...
Chess Knight:
https://www.amazon.com/Chess-Knight-M...
The music was mixed from this track here: https://youtu.be/VsOQUugtnnA
83
views