Dad It Yourself DIY

Updating my shop lighting has been a long time coming. I purchased my new lights nearly eight months ago after seeing a video by Drew Fisher of Fisher’s Shop, and how he upgraded the lighting in his basement shop. The kit of 10 LED fixtures with 5,000K of daylight luminescence is priced within reach at $179.00, that’s less than $20.00 per fixture! In my shop I went from four florescent tubes to twenty LED lights. That’s a 500% increase in lighting. The entire installation took me about two hours, and that was only because I had to install two new outlets. Other than the outlets, the installation was without any major challenges, and went smoothly! I am very happy with how my shop lighting look snow, it was an upgrade well worth the investment in time and money! Thanks for watching Dad It Yourself!!! **This post contains affiliate links and I will be compensated if you make a purchase after clicking on my links.** Helpful/Affiliate Links: SUNCO Lighting 10 Pack LED Utility Shop Light, 4 FT, Linkable Integrated Fixture, 40W=260W, 5000K Daylight, 4100 LM, Frosted Lens, Surface/Suspension Mount, Pull Chain, Garage - ETL, Energy Star: https://amzn.to/2N1NH8v Support Dad It Yourself by shopping on Amazon: https://www.amazon.com/shop/dadityourselfdiy Support Dad It Yourself by shopping at Home Depot: https://homedepot.sjv.io/LENzO #Lighting #LED #ShopLights #DadItYourselfDIY

#Shorts So soothing listening to the the sounds tools make! this is my first compilation. Let me know if you want more? I have over 150 Ryobi Tools! I'd love to capture them all! What's your favorite Ryobi Tool? Thanks for watching Dad It Yourself!!! **This post contains affiliate links and I will be compensated if you make a purchase after clicking on my links.** Helpful/Affiliate Links: Tools I use in my shop: https://www.dadityourselfdiy.com/2019/06/power-tools-i-use.html Tools I use in my yard: https://www.dadityourselfdiy.com/2019/06/lawn-tools-i-use.html Support Dad It Yourself by shopping on Amazon: https://www.amazon.com/shop/dadityourselfdiy Support Dad It Yourself by shopping at Home Depot: https://homedepot.sjv.io/LENzO #Shorts #Ryobi #Tools #DadItYourselfDIY #HomeDepot

I was recently commissioned to build a display shelf for a hot sauce collection. This project is HOT! The design is not original, in fact a user on Reddit posted a picture of the one he built for himself, this was the inspiration for my customer, and their project. In fact, here is a link to the original post on Reddit: https://www.reddit.com/r/woodworking/comments/i7h35y/my_first_woodworking_project_a_rack_to_display/ I made it out of pine boards from the Home Depot, glued up a panel, cut out a flame silhouette, milled some shelves, glued and screwed them on, and stained the entire thing with Verathane Cognac wood stain, which has a nice brownish red tint to it. I finished it all off with three coats of Deft high gloss lacquer. It’s a little bit smaller than the original, but I have to take into consideration shipping the final product to the recipient, but it will still hold a couple dozen bottles of hot sauce, and I can always build another one as their collection grows! Thanks for watching Dad It Yourself!!! **This post contains affiliate links and I will be compensated if you make a purchase after clicking on my links.** Helpful/Affiliate Links: Power Tools I use in my Shop: https://www.dadityourselfdiy.com/2019/06/power-tools-i-use.html Support Dad It Yourself by shopping on Amazon: https://www.amazon.com/shop/dadityourselfdiy Support Dad It Yourself by shopping at Home Depot: https://homedepot.sjv.io/LENzO Music Credits: Down the Way by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ Firefly by Chris Haugen [Royalty Free Music for YouTube Creators] https://www.youtube.com/watch?v=Q4kPkC06kOs Indie Romance by Silent Partner [Royalty Free Music for YouTube Creators] https://www.youtube.com/watch?v=OfPX_ugsDhg River Crossing by Albis [Royalty Free Music for YouTube Creators] https://www.youtube.com/watch?v=CBc7XiXZB0o Kick the Can – The Mini Vandals [Royalty Free for YouTube Creators] https://www.youtube.com/watch?v=m7bcQOHYQOs Dirty Mac by Endless Love [Royalty Free Music for YouTube Creators] https://www.youtube.com/watch?v=Insagpfq--g Safety Net by Riot [Royalty Free Music for YouTube Creators] https://www.youtube.com/watch?v=faEtFGEqEAo #HotSauce #Display #Woodworking #DadItYourselfDIY #HomeDepot #Ryobi #RyobiNation

#Shorts I have a big tropical fish aquarium in my house. Earlier this year I completed a built-in cabinet system in my family room. One of the reasons for this project was to have a place for my new 90-gallon aquarium. I had a 75 gallon on its own stand, but it was taking up valuable real estate in the room. So, with the new tank purchased and the dimensions known, I was able to build a cabinet that fit the spot, and could support the 750 pounds of tropical fish, glass, water, sand, and rocks. I started out by setting the tank up, adding the filter, heater, sand, plants, and a giant shipwreck sculpture. Then it was a matter of moving the water from the old tank to the new tank, and topping it off with fresh water. And during this entire process I was transferring the fish from one tank to the next. I think they really like their new home! Thanks for watching Dad It Yourself!!! **This post contains affiliate links and I will be compensated if you make a purchase after clicking on my links.** Helpful/Affiliate Links: Amazon (www.amazon.com/shop/dadityourselfdiy) XL WW2 Navy Battleship Aquarium Ornament 2 Part, Jumbo Sized Fish Tank Decoration Military Gunner Ships Themed Decor: https://amzn.to/35hoe10 Music Credits: Tropic by Anno Domini Beats [Royalty Free Music for YouTube Creators] https://www.youtube.com/watch?v=rIOX4jGO-g4 Support Dad It Yourself by shopping on Amazon: https://www.amazon.com/shop/dadityourselfdiy Support Dad It Yourself by shopping at Home Depot: https://homedepot.sjv.io/LENzO #Aquariums #FishTank#TropicalFish #DadItYourselfDIY

#Shorts The Ryobi RTS10NS Table Saw is a workhorse in my shop. It has been replaced by the RTS12 which is a great option with included stand and accessories! **This post contains affiliate links and I will be compensated if you make a purchase after clicking on my links.** RYOBI 15 Amp 10 in. Table Saw with Folding Stand: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=309412842&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-15-Amp-10-in-Table-Saw-with-Folding-Stand-RTS12%2F309412842&intsrc=PUI1_2950 Amazon (www.amazon.com/shop/dadityourselfdiy) Home Depot (Home Depot: https://homedepot.sjv.io/LENzO) Thanks for watching! #Ryobi #TableSaw #HomeDepot #DadItYourselfDIY

So today I am completing a Navy Shadow Box for a Navy Chief Petty Officer who is retiring after 20 years of service. This video was originally filmed as Instagram Stories, and was not intended to be a full length video for YouTube. But the project was too unique and deserved to be documented. It is mostly narrative of completed steps, without the traditional "action" shots of wood being milled, etc. To most people its a woodworking project, but to the recipient it symbolizes their career and years of service to our country. The purpose of this video is to show all the steps that went into building this keepsake box with the shadow box integrated into the lid. My first one, but definitely not my last. The back panel is covered with a blue velveteen material that is attached with spray adhesive. Using my Ryobi 18V hot glue gun, I can secure everything to the back panel, I just need to remember to use a little extra glue on the smooth metal pieces. I always vacuum out the interior as best I can, before placing the Plexiglass front panel. You can use glass too, your choice. Shadow boxes are easy to make, lend themselves to creativity, but the real reward in making them is seeing how much they mean personally to the recipient and how it depicts them and their service. Helpful/Mentioned Links: - Building a Shadow Box from Scratch: https://youtu.be/_nS_pLOvTPk - Ryobi P305 18V One+ Glue Gun: https://amzn.to/2I5cGlG - Titebond Thick and Quick: https://amzn.to/2T8Xev7 Thanks for watching! Don’t forget to subscribe at www.youtube.com/DadItYourselfDIY #DadItYourselfDIY #Navy Chief #ShadowBox #HomeDepot #Titebond #Ryobi #Bessy #USNavy #NavyChiefNavyPride

#Shorts Is it Shiplap or Ship Lap? Regardless I installed some on a Kitchen Island using a Ryobi 23 Gauge Pin Nailer and the Caulking Gun. Check out the full video at: https://youtu.be/37IN8hVsY_s Flighty Theme by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. https://creativecommons.org/licenses/by/4.0/ Source: http://incompetech.com/music/royalty free/index.html?isrc=USUAN1100421 Artist: http://incompetech.com/ #Shorts #DadItYoursweflDIY #Ryobi #RyobiNation #ShipLap #KitchenRenovation

#Shorts Built a French Cleat Tool Holder for a box of rubber gloves. keeps them from getting lost I the clutter, crushed, damaged, and easily accessible when I needs gloves when painting, staining or using chemicals. This is my first YouTube #shorts video. Now back to regular programming. #dadityourselfdiy #shorts #frenchcleat #frenchcleatwall

I love Christmas Lights! I go crazy every year with the lights, buying more every year. I am in one-sided competition with my neighbors, they don’t even know. But every year, they are always asking me when I am going to put my lights up. My goal is always Thanksgiving Weekend, but sometimes that slides! The other challenge is the weather, the clear days are bitter cold, but the alternate is wind and rain. All of these add challenges to the task of installing the lights. As a reminder, when getting on your roof, or using ladders, please get some help, have someone hold your ladder, or just act as a safety observer, and if you are getting on a roof that is more than ten feet, consider getting and using a fall protection product! After multiple days of installing lights, my 2020 display is ready for the holidays! We can just hope for some snow!! Thanks for watching Dad It Yourself!!! **This post contains affiliate links and I will be compensated if you make a purchase after clicking on my links.** Helpful/Affiliate Links: Amazon (www.amazon.com/shop/dadityourselfdiy) NSi Industries TORK 652B Outdoor Heavy-Duty 15-Amp Photocell Controlled/Light Activated Mechanical Plug-In Timer With 6 1/2-Inch Cord: https://amzn.to/2Wzvtg0 WaterLuu 20 Pack 2.9 Inches Ceiling Hooks Vinyl Coated Screw-in Wall Hooks (10 Black+10 White): https://amzn.to/2KHrrzP No Ladder Pro Quick Release Christmas Light Clips, 50 Count: https://amzn.to/38inXvL Music Credits: Canon and Variation by Twin Musicom is licensed under a Creative Commons Attribution 4.0 license. https://creativecommons.org/licenses/by/4.0/ Artist: http://www.twinmusicom.org/ Deck the Halls B by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. https://creativecommons.org/licenses/by/4.0/ Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100368 Artist: http://incompetech Carol Of The Bells by Audionautix is licensed under a Creative Commons Attribution 4.0 license. https://creativecommons.org/licenses/by/4.0/ Artist: http://audionautix.com/ We Wish You a Merry Christmas by Twin Musicom is licensed under a Creative Commons Attribution 4.0 license. https://creativecommons.org/licenses/by/4.0/ Artist: http://www.twinmusicom.org/ Support Dad It Yourself by shopping on Amazon: https://www.amazon.com/shop/dadityourselfdiy Support Dad It Yourself by shopping at Home Depot: https://homedepot.sjv.io/LENzO #ChristmasLights #HappyHolidays #HomeDepot #Amazon

Well, it is that time of year to get some great deals on Ryobi Tools when all the good sales start for Black Friday, Cyber Monday! They have gone from a day, to a weekend, to a week, and then, they roll right into the pre-Christmas sales! It is a great opportunity to get some good deals on tools, saving, 20, 25, 40 or even 50% off retail! I was able to get some real deals on Ryobi tools! Not just depending on what I could get from Home Depot but branching out and searching Amazon for discontinued or hard to find items, and then it was off to Direct Tools Factory Outlet and Ryobi Deal Finders for the “scratch and dents” that are in some cases 50% off what you would pay at Home Depot for the same tool! Check out my finds! It’s worth it! Thanks for watching Dad It Yourself!!! **This post contains affiliate links and I will be compensated if you make a purchase after clicking on my links.** Helpful/Affiliate Links: Amazon (www.amazon.com/shop/dadityourselfdiy) Ryobi P747 Inflator/Deflator (Tool Only): https://amzn.to/39TmTAC OEMTOOLS 22180 Tool Box Set with Removable Tool Trays, Includes Two (2) Tool Boxes, Sizes 19” & 12.5”, Portable Tool Box Organizers and Storage Box Handle: https://amzn.to/3mQx2li CRAFTSMAN Evolv 0-10047 5 Piece Pliers Set: https://amzn.to/3mOHWbc RYOBI RTB 19INCH Portable Tool Box: https://amzn.to/3mMdI8N RYOBI P119 18v ONE+ NiCad Lithium Ion Battery Charger: https://amzn.to/39I3v9T Direct Tools Factory Outlet (www.directtoolsoutlet.com) RYOBI RYI300BG 40V 300-Watt Power Inverter: https://www.directtoolsoutlet.com/Products/RYOBI-300-Watt-Powered-Inverter-for-40-Volt-Battery/p/RYI300BG RYOBI ONE+ 18 Volt Hybrid Stereo with Bluetooth Wireless Technology (Tool Only) https://www.directtoolsoutlet.com/Products/Outdoor-Living/Radios-%26-Speakers/RYOBI-ONE%2B-18-Volt-Hybrid-Stereo-with-Bluetooth-Wireless-Technology/p/P746 RYOBI P3370 18v ONE+ Cooling Cooler: https://www.directtoolsoutlet.com/Products/Outdoor-Living/RYOBI-18-Volt-ONE%2B-Cooling-Cooler/p/P3370 RYOBI P325 ONE+ 18 Volt AirStrike 16-Gauge Straight Finish Nailer: https://www.directtoolsoutlet.com/Brands/Platform/ONE%2B/RYOBI-ONE%2B-18-Volt-AirStrike-16-Gauge-Straight-Finish-Nailer/p/P325 RYOBI ONE+ 18 Volt In-Vehicle Charger: https://www.directtoolsoutlet.com/Brands/Platform/ONE%2B/RYOBI-ONE%2B-18-Volt-In-Vehicle-Charger/p/P131 Ryobi Deal Finders (www.ryobidealfinders.com) RYOBI RFK35A1 Spring Assisted Folding Knife: https://ryobidealfinders.com/products/ryobi-spring-assisted-folding-knife?_pos=1&_sid=dec49b729&_ss=r Home Depot (https://homedepot.sjv.io/LENzO) RYOBI P3150 18-Volt ONE+ Lithium-Ion Cordless Heat Gun (Tool Only): https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=306925921&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-18-Volt-ONE-Lithium-Ion-Cordless-Heat-Gun-Tool-Only-P3150%2F306925921&intsrc=PUI1_2950 RYOBI RFK25T Compact Folding Tactical Knife: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=309389022&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-Compact-Folding-Tactical-Knife-RFK25T%2F309389022&intsrc=PUI1_2950 Ryobi P743 18-Volt ONE+ Lithium-Ion Portable Power Source: https://ryobidealfinders.com/products/18-volt-one-lithium-ion-portable-power-source?_pos=1&_sid=6872aa7f5&_ss=r RYOBI P704 18-volt ONE+ Cordless Lithium-Ion Work Light: https://ryobidealfinders.com/products/18v-cordless-one-worklight-by-ryobi?_pos=1&_sid=455c6989e&_ss=r RYOBI P790 18-Volt ONE+ Hybrid LED Project Light (Tool Only): https://ryobidealfinders.com/products/18-volt-one-hybrid-led-project-light-tool-only?_pos=1&_sid=0df8003a9&_ss=r RYOBI AR2032 Impact Rated Bit Holder Set (3-Piece): https://ryobidealfinders.com/products/impact-rated-bit-holder-set-3-piece?_pos=1&_sid=bf65ba313&_ss=r RYOBI RPM121 Black Fine Point Permanent Workshop Marker: https://ryobidealfinders.com/products/black-fine-point-permanent-workshop-marker?_pos=1&_sid=f03b6628e&_ss=r RYOBI RYI2000GRA 2,000-Watt Gray Gasoline Powered Digital Inverter Generator: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=308279711&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-2-000-Watt-Gray-Gasoline-Powered-Digital-Inverter-Generator-RYI2000GRA%2F308279711&intsrc=PUI1_2950 Power Tools I use in my Shop: https://www.dadityourselfdiy.com/2019/06/power-tools-i-use.html Support Dad It Yourself by shopping on Amazon: https://www.amazon.com/shop/dadityourselfdiy Support Dad It Yourself by shopping at Home Depot: https://homedepot.sjv.io/LENzO #DadItYourselfDIY #HomeDepot #Amazon #DirectTools #RyobiDealFInders #Ryobi #RyobiNation

Tool Batteries are expensive. In fact, they are probably more expensive than the actual tools in some cases. The average battery is $100.00, the average tool is $79.00! No wonder the tool manufacturers offer regular sales where you buy two batteries for $99.00 and get a free tool, they are probably making a killing selling you more batteries! Well, there is always the option of buying an aftermarket battery. For nearly half the price you get a battery that performs as well as the factory battery, or so we hope. There is no guarantee as to the quality or the construction if they are the same specifications. All the batteries are made overseas, it’s the tool company that makes them their own. In the case of Ryobi, we know there is internal battery management hardware, and external cladding for impact resistance. The aftermarket batteries do not offer either. That said, I ran an 18V and a 40V aftermarket battery through its paces, and I was impressed with the results, and am impressed with the price. I will keep these and see how long they last. Stay tuned! Thanks for watching Dad It Yourself!!! Please consider Subscribing! Helpful/Affiliate Links: KUNLUN 40V 6.0Ah Lithium-ion Battery for Ryobi 40-Volt Collection Cordless Power Tools OP4040 OP4026 OP4030 OP4050 OP4060A Ryobi 40V Battery: https://www.amazon.com/gp/product/B085XWQZBK/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B085XWQZBK&linkCode=as2&tag=dadityourse03-20&linkId=f1beb62840dd3897c599aa5363dc320f ANTRobut 5.0Ah 18V Replacement Battery for Ryobi 18V Lithium Battery for P102 P103 P104 P105 P107 P108 P109 Ryobi 18-Volt ONE+ Cordless Tool: https://www.amazon.com/gp/product/B06WV76F1Q/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B06WV76F1Q&linkCode=as2&tag=dadityourse03-20&linkId=a6e989486a6d269e38717dd2b4f94f2b RYOBI RY40450 40-Volt Lithium-Ion Cordless Leaf Vacuum/Mulcher with 4.0 Ah Battery and Charger Included: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=308040380&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-40-Volt-Lithium-Ion-Cordless-Leaf-Vacuum-Mulcher-with-4-0-Ah-Battery-and-Charger-Included-RY40450%2F308040380&intsrc=PUI1_2950 RYOBI P3240 18-Volt ONE+ 3 Gal. Project Wet/Dry Vacuum with Accessory Storage (Tool-Only): https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=303579585&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-18-Volt-ONE-3-Gal-Project-Wet-Dry-Vacuum-with-Accessory-Storage-Tool-Only-P3240%2F303579585&intsrc=PUI1_2950 RYOBI RYi300BG 300-Watt Powered Inverter for 40-Volt Battery: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=308736685&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-300-Watt-Powered-Inverter-for-40-Volt-Battery-RYi300BG%2F308736685&intsrc=PUI1_2950 Power Tools I use in my Shop: https://www.dadityourselfdiy.com/2019/06/power-tools-i-use.html Support Dad It Yourself by shopping on Amazon: https://www.amazon.com/shop/dadityourselfdiy Support Dad It Yourself by shopping at Home Depot: https://homedepot.sjv.io/LENzO #DadItYourselfDIY #HomeDepot #KunLun #ArtRobut #Amazon #Ryobi #RyobiNation

Your Gas Fireplace is the the center of your room and it is that time of the year, the leaves are falling, and the temperatures are dropping. What a better way to spend the autumn and winter months then in front of a cozy fireplace. We have a gas insert fireplace in our home, and it needs a little maintenance before we start using it for the next several months. The paint has flaked off in some spots, the glass is dirty on the inside and out, and its just a little dirty. Also, before using a gas appliance, you should always give it a good inspection to make sure it is not a fire danger, or could cause damage to your home, or something worse! I followed the gas fireplace manufacturer’s suggestions from the owner’s manual to the letter. If you are uncomfortable doing this time of maintenance, please hire a licensed professional! I repainted the areas that needed it, cleaned the glass inside, and out, vacuumed away the old dust and dirt that has accumulated since last year and checked all the gas components. It is good and new and ready for another season! Don’t forget to enter your chance to win a pair of gear light flashlights by following the directions and entering on Instagram at www.instagram.com/dadityourselfdiy Thanks for watching Dad It Yourself!!! Please consider Subscribing! Helpful/Affiliate Links: Rust-Oleum Automotive 12 oz. High Heat Flat Black Protective Enamel Spray Paint: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=202628557&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRust-Oleum-Automotive-12-oz-High-Heat-Flat-Black-Protective-Enamel-Spray-Paint-6-Pack-248903%2F202628557&intsrc=PUI1_2950 GearLight LED Tactical Flashlight S1000 [2 PACK] - High Lumen, Zoomable, 5 Modes, Water Resistant, Handheld Light - Best Camping, Outdoor, Emergency, Everyday Flashlights: https://www.amazon.com/gp/product/B072WHQFJ7/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B072WHQFJ7&linkCode=as2&tag=dadityourse03-20&linkId=02f586282fdb47fe06b6219f08113875 Power Tools I use in my Shop: https://www.dadityourselfdiy.com/2019/06/power-tools-i-use.html Support Dad It Yourself by shopping on Amazon: https://www.amazon.com/shop/dadityourselfdiy Support Dad It Yourself by shopping at Home Depot: https://homedepot.sjv.io/LENzO #DadItYourselfDIY #HomeDepot #SuperiorFireplaces #Lennox #Rustoleum #GearLight #Ryobi #RyobiNation

Quick little project where I needed to build a cabinet enclosure for a wine refrigerator. The materials required were two sheets of 24” x 48” ¾” MDF, some scraps of ¾” plywood, glue, and 18-gauge brad nails. I finished it with Kilz Standard Primer and Behr Marquee Satin White using the Wagner Flexio 2000. There are no plans because this cabinet build is custom for this model refrigerator. But I used the techniques learned from Brad Rodriquez @FixThisBuildThat and Bob Claggett @ILikeToMakeStuff Check out their channels. Thanks for watching Dad It Yourself!!! Helpful/Affiliate Links: I Like to Make Stuff: BITS – Edge Banding: https://youtu.be/nCFixYE80jI EdgeMate Edge Banding: https://homedepot.sjv.io/GaR72 WAGNER Flexio 2000 HVLP Paint Sprayer: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=302752208&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FWagner-Flexio-2000-HVLP-Paint-Sprayer-0529086%2F302752208&intsrc=PUI1_2950 Kalamera Mini Fridge 15" Wine Cooler Refrigerator - 30 Bottle Wine Fridge with Stainless Steel Refrigerator& Double-Layer Tempered Glass Door and Temperature Memory Function Built-in or Freestanding: https://amzn.to/3yVrhZB Power Tools I use in my Shop: https://www.dadityourselfdiy.com/2019/06/power-tools-i-use.html Support Dad It Yourself by shopping on Amazon: https://www.amazon.com/shop/dadityourselfdiy Support Dad It Yourself by shopping at Home Depot: https://homedepot.sjv.io/LENzO Thanks for watching! Please consider Subscribing! #DadItYourselfDIY #HomeDepot #Ryobi #RyobiNation #Kilz #BehrPaints #WagnerSprayTech

They are finally available in the USA!! The Ryobi Wall Cabinets with integrated tool holders! After years of seeing them on the Australia Ryobi Page they are finally here! I scooped up one of each model. Check the video, where I unbox, look at the products, and show how much they can hold! What a great addition to the workshop!! Thanks for watching Dad It Yourself!!! Helpful/Affiliate Links: RYOBI STH401 17 in. W x 11.1 in. H x 18.8 in. D 21-Gauge Steel Wall Mounted Hanging Cabinet in Gray with Door (1-Piece), Green/Gray: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=313895960&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-17-in-W-x-11-1-in-H-x-18-8-in-D-21-Gauge-Steel-Wall-Mounted-Hanging-Cabinet-in-Gray-with-Door-1-Piece-STH401%2F313895960&intsrc=PUI1_2950 RYOBI STH402 17 in. W x 11.1 in. H x 18.8 in. D 21-Gauge Steel Wall Mounted Hanging Cabinet in Gray (1-Piece): https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=313895950&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-17-in-W-x-11-1-in-H-x-18-8-in-D-21-Gauge-Steel-Wall-Mounted-Hanging-Cabinet-in-Gray-1-Piece-STH402%2F313895950&intsrc=PUI1_2950 Power Tools I use in my Shop: https://www.dadityourselfdiy.com/2019/06/power-tools-i-use.html Support Dad It Yourself by shopping on Amazon: https://www.amazon.com/shop/dadityourselfdiy Thanks for watching! Please consider Subscribing! #DadItYourselfDIY #HomeDepot #Ryobi #RyobiNation #HomeDepot

Is it Shiplap or Ship Lap? In this video I am going to be demonstrating how to install Shiplap on a Kitchen Island. This technique can be used on any flat surface. The total cost for this project was about $100.00 and took a couple of hours. First, I installed the lower rails, and then the vertical stiles. These were made up of 1” x 6” primed trim boards. There was not a top rail, because it’s under a countertop. But if the top edge is visible, you would want to install a top rail. They were mitered and installed with 23-gauge pin nails. You can use a 18-gauge brad nails for this step as well. Secondly, I installed the field boards which were a nickel reveal ship lap board. I used construction adhesive and 23-gauge headless pin nails to secure. In hindsight, I probably could have gotten away without using the pin nails for this step. The third step, was to install a shoe molding. While this is not necessary, it really “dresses-up” the installation. This was install with construction adhesive (An unnecessary step, but requested by the client, to keep their toddler from tearing it off), and then 23-gauge pin nails. Finally, I cleaned up all the seams with a DAP painters caulk.. I don’t paint, I left that up to the homeowner, who will be painting it a bright white semigloss latex to match the cabinets and trim in the kitchen. Thanks for watching Dad It Yourself!!! Check out the video! Helpful/Affiliate Links: PrimeLinx 1 in. x 6 in. x 8 ft. Radiata Pine Finger Joint Primed Board: https://www.homedepot.com/p/Unbranded-1-in-x-6-in-x-8-ft-Radiata-Pine-Finger-Joint-Primed-Board-280552/304468198 Arauco 9/16 in. x 5-1/4 in. x 12 ft. Radiata Pine Nickel Gap Ship Lap Board: https://www.homedepot.com/p/ARAUCO-9-16-in-x-5-1-4-in-x-12-ft-Radiata-Pine-Nickel-Gap-Ship-Lap-Board-1186661/300803814 Loctite Power Grab Express 9 Fl. Oz. All Purpose Construction Adhesive: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=206449573&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FLoctite-Power-Grab-Express-9-fl-oz-All-Purpose-Construction-Adhesive-12-Pack-2022554%2F206449573&intsrc=PUI1_2950 DAP Alex Fast Dry 10.1 oz. Acrylic Latex Plus Silicone Caulk, White: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=100634331&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FDAP-Alex-Fast-Dry-10-1-oz-Acrylic-Latex-Plus-Silicone-Caulk-12-Pack-18426%2F100634331&intsrc=PUI1_2950 RYOBI P310G 18-Volt ONE+ Power Caulk and Adhesive Gun https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=205648767&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-18-Volt-ONE-Power-Caulk-and-Adhesive-Gun-Tool-Only-P310G%2F205648767&intsrc=PUI1_2950 RYOBI 18-Volt ONE+ Lithium-Ion Cordless AirStrike 23-Gauge 1-3/8 in. Headless Pin Nailer: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=302238848&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-18-Volt-ONE-Lithium-Ion-Cordless-AirStrike-23-Gauge-1-3-8-in-Headless-Pin-Nailer-Tool-Only-P318%2F302238848&intsrc=PUI1_2950 Power Tools I use in my Shop: https://www.dadityourselfdiy.com/2019/06/power-tools-i-use.html Support Dad It Yourself by shopping on Amazon: https://www.amazon.com/shop/dadityourselfdiy Thanks for watching! Please consider Subscribing! #DadItYourselfDIY #HomeDepot #Ryobi #RyobiNation #ShipLap #KitchenRenovation #CountryLiving #DAPProducts #LocTite #PowerGrab

Can broken tools from Ryobi be repaired? I have collected a few broken tools over the past few months. In every case the tools were well past their warranty period. The great thing about Ryobi Tools is the price point, honestly, its just easier to get a replacement tool if it is past the one-year replacement period from Home Depot. While most Ryobi tools have a three-year manufacturer’s warranty, the process and shipping costs usually either exceed the cost of the tool, or at a minimum, the cost of the replacement part. And that is what I chose to do, repair my broken tools. So, I ordered all the parts I assumed I would need from the Ryobi Tools website and went about replacing/repairing each tool. I have some technical and mechanical background, so this was not a big challenge, but if you are not comfortable with these tasks, then please do not attempt for your health and safety. This is a long video (25 minutes) by YouTube Standards, so here are the Chapter Marks if you want to skip ahead to a specific tool repair: 0:00 - Introduction 00:14 - Safety Warning: 01:46 - Trim Router: 04:27 - Caulking Gun: 14:03 - Reciprocating Saw: 18:22 - Orbital Sander: 22:24 - Drill Press: Thanks for watching Dad It Yourself!!! Check out the video! Helpful/Affiliate Links: Krud Killer Caulk Remover: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=305804534&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FKrud-Kutter-24-oz-Caulk-Remover-6-Pack-336250%2F305804534&intsrc=PUI1_2950 RYOBI P601 18-Volt Cordless Fixed Base Trim Router: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=206955202&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-18-Volt-ONE-Cordless-Fixed-Base-Trim-Router-Tool-Only-with-Tool-Free-Depth-Adjustment-P601%2F206955202&intsrc=PUI1_2950 RYOBI P310G 18-Volt ONE+ Power Caulk and Adhesive Gun https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=205648767&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-18-Volt-ONE-Power-Caulk-and-Adhesive-Gun-Tool-Only-P310G%2F205648767&intsrc=PUI1_2950 RYOBI P514 18-Volt ONE+ Cordless Reciprocating Saw: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=312462409&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-18-Volt-ONE-Cordless-Reciprocating-Saw-Tool-Only-P519%2F312462409&intsrc=PUI1_2950 Ryobi P411 18-Volt ONE+ 5” Random Orbital Sander: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=205975756&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-18-Volt-ONE-Cordless-5-in-Random-Orbit-Sander-Tool-Only-P411%2F205975756&intsrc=PUI1_2950 RYOBI DP103L 10” Drill Press: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=205503636&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-10-in-Drill-Press-with-EXACTLINE-Laser-Alignment-System-DP103L%2F205503636&intsrc=PUI1_2950 Ryobi Parts Store: https://ryobipower.ordertree.com/ Manuals: Ryobi P601 Trim Router: https://ryobipower.ordertree.com/catalogsearch/result/?q=+P601 Ryobi P310G Caulking Gun: https://ryobipower.ordertree.com/catalogsearch/result/?q=+P310G Ryobi P514 Reciprocating Saw: https://ryobipower.ordertree.com/catalogsearch/result/?q=+P514 Ryobi P411 Random Orbital Sander: https://ryobipower.ordertree.com/catalogsearch/result/?q=+P411 Ryobi DP103L Drill Press: https://ryobipower.ordertree.com/catalogsearch/result/?q=DP103L Power Tools I use in my Shop: https://www.dadityourselfdiy.com/2019/06/power-tools-i-use.html Support Dad It Yourself by shopping on Amazon: https://www.amazon.com/shop/dadityourselfdiy Thanks for watching! Please consider Subscribing! #DadItYourselfDIY #HomeDepot #Ryobi #RyobiNation

I waited for this Ryobi Hybrid Tripod Light for months… Every time I tried to order it online it was out of stock, it was never in stock at any of the local Home Depots. The one day it was available online, and I pounced! For about $149.00 after taxes and shipping. I had the new Ryobi P782 Hybrid Tripod Stand Light! Here are the specifications: RYOBI introduces the 18-Volt ONE+ Cordless Hybrid Tripod Stand Light (Tool Only). Standing tall at 5 ft., it also collapses to an impressive 22 inches. With 2,700 Lumens, this light has the power to illuminate large workspaces. Work all day with up to 10 hours of runtime on a single charge or use the AC hybrid option for endless runtime. Best of all, it is part of the RYOBI ONE+ System of over 175 Cordless Tools that all work on the same battery platform. Backed by the RYOBI 3-Year Manufacturer's Warranty, the 18-Volt ONE+ Cordless Hybrid Tripod Stand Light includes an operator's manual. Battery and charger sold separately. Check out the video and see how I did it, do not forget to put your questions and suggestions in the comments! Thanks for watching Dad It Yourself!!! Check out the video! Helpful/Affiliate Links: RYOBI 18-Volt ONE+ Cordless Hybrid Tripod Stand Light: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=312860164&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-18-Volt-ONE-Cordless-Hybrid-Tripod-Stand-Light-Tool-Only-P782%2F312860164&intsrc=PUI1_2950 Power Tools I use in my Shop: https://www.dadityourselfdiy.com/2019/06/power-tools-i-use.html Support Dad It Yourself by shopping on Amazon: https://www.amazon.com/shop/dadityourselfdiy Music Credits: Flow by Fredji and Tobsky [Royalty free Music from SoundCloud] https://soundcloud.com/fredjimusic/fredji-tobsky-flow-original-mix Why Did You Do It by Everet Almond [YouTube Audio Library - Royalty Free Music for YouTube Creators]https://www.youtube.com/watch?v=pSJPjQTCNUw Thanks for watching! Don’t forget to subscribe at www.youtube.com/DadItYourselfDIY #DadItYourselfDIY #HomeDepot #Ryobi #RyobiNation

It's Demolition Day! I started a demo project this week, eventually I will put everything back together though. This is a fun video with a lot of breaking stuff and generating trash. When it was all over there was SIXTY yards of debris pulled from this house! Check out the video and see how I did it, do not forget to put your questions and suggestions in the comments! Thanks for watching Dad It Yourself!!! Check out the video! Music Credits: Try by R.LUM.R [YouTube Audio Library - Royalty Free Music for YouTube Creators] https://www.youtube.com/watch?v=BnFxQerDnSU Ditch Diggin’ by Jingle Punks [YouTube Audio Library - Royalty Free Music for YouTube Creators] https://www.youtube.com/watch?v=hMnZL6rBwjs Dirty Mac by Endless Love [YouTube Audio Library - Royalty Free Music for YouTube Creators] https://www.youtube.com/watch?v=Insagpfq--g Good Vibes – MBB (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: https://youtu.be/0ODLEQKT6xY Ibiza by MBB (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: https://youtu.be/DLkX0UJ90Wo Thanks for watching! Don’t forget to subscribe at www.youtube.com/DadItYourselfDIY Please consider Subscribing! #DadItYourselfDIY #DIY #DemoDay #HomeRenovation

So, I finished *most* of the built-in cabinets in May for our family room, but a few months have passed and its time to wrap this one up. Just an apology, that this video is long, I just could bear to see it split into THREE parts!! This is Part Two of a two-part series where I install the counter tops, build the drawers, doors, and drawer fronts for the cabinets. I also built a new mantel and installed some floating shelves. This was an awesome project, I learned a bunch of new skills, and really changed the overall flow of our family room! The crowning achievement was in installation of a NINETY-gallon aquarium. I originally thought it was only a 55 gallon. But this cabinet is holding up over 720 POUNDS of water, sand, glass, and fish!! Many of the techniques I use are from Brad Rodriquez at Fix This Built That. Check out his channel if you do not already follow him: @FixThisBuildThat Check out the video and see how I did it, do not forget to put your questions and suggestions in the comments! Thanks for watching Dad It Yourself!!! Check out the video! ** This post contains affiliate links and I will be compensated if you make a purchase after clicking on my links. ** Helpful/Mentioned Links: Amazon: WELLAND 36 inch White Mission Floating Shelves for Wall, Bathroom Wall Mount Shelves, Wood Modern Display Shelves, Book Shelves, for Bedroom, Living Room and Kitchen: https://amzn.to/2FuEUZ9Titebond 2403 Wood Molding Glue, Clear,8-Ounces: https://amzn.to/3h0GmAr Kreg Tool Company KHI-HINGE Concealed Hinge Jig: https://amzn.to/30ZkQ9j Hardware Resources 20- Pack-3 Way Adjustments- 1/2" Overlay-Compact Hinges: https://amzn.to/3avgRo5 Liberty D68820C-W-TS 20-Inch Bottom Mount Drawer Slides: https://amzn.to/3atXrjN Music Credits: February by Vibe Mountain/Jeff Conrad [YouTube Audio Library - Royalty Free Music for YouTube Creators] https://www.youtube.com/channel/UCqR-pY7pgaX2eNymgooqUwQ Dusty Fingers by DJ Williams [YouTube Audio Library - Royalty Free Music for YouTube Creators] https://www.youtube.com/watch?v=tU_qinknSuQ Epiphany – MusicbyAden (Vlog No Copyright Music) https://www.youtube.com/watch?v=79UpeRMD-So Classic Rose 2 by Jeff Conrad/Vibe Mountain [YouTube Audio Library - Royalty Free Music for YouTube Creators] https://www.youtube.com/channel/UCqR-pY7pgaX2eNymgooqUwQ Pursuit Of Summer - YANQRA (Vlog No Copyright Music) https://www.youtube.com/watch?v=2Qg-ibPnxJA Inevitable Hope by RKVC [YouTube Audio Library - Royalty Free Music for YouTube Creators] https://www.youtube.com/channel/UCowgKeMGXKY038qwuf3yYlw Island by Jarico [Royalty Free Music by SoundCloud] https://soundcloud.com/jaricomusic/island-free Wishful Thinking by Dan Liebowitz/Animal Liberation Orchestra [YouTube Audio Library - Royalty Free Music for YouTube Creators] https://www.youtube.com/channel/UCOg3zLw7St5V4N7O8HSoQRA Pulse by Geographer [YouTube Audio Library - Royalty Free Music for YouTube Creators] https://www.youtube.com/channel/UCcB_tnqYHwPzADwUdeppIIQ At The Shore - The Dark Continent by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100770 Artist: http://incompetech.com/ Thanks for watching! Don’t forget to subscribe at www.youtube.com/DadItYourselfDIY Please consider Subscribing! #DadItYourselfDIY #DIY #Amazon #HomeDepot #Everbuilt #Kreg #Ryobi #RyobiNation

Applying Lawn Fertilizer is one of the most important steps. It is now the middle of Summer here in the Pacific Northwest and this is Part 4 of my Cool Lawn Series. These videos are intended to show the steps of prepping your lawn in the Springs over the course of a few days or a week. In my case, it took about six weeks total. I defiantly was behind the curve when it came to the application of the fertilizers, iron, and humic acid. It will take a little longer for the lawn to react to the nutrients because of the heat, but it will come around. Don’t be me, get it done early! I started by applying Scott’s Triple Action with has a nitrogen supplement, a weed controller, and a pre-emergent. If you are over seeding in this step, or plan on. Do not use any products that have a pre-emergent, use a regular weed and feed or lawn food. The next step was adding an iron supplement, this is extremely effective in greening up the lawn without adding a bunch of extra fertilizer. The awesome part about this product is that it cannot be over-used or burn the lawn! The next step is to ply humic acid. This product acts as a supplement in that it encouraged the extra absorption of the other products into the plants, so that they will take advantage of all the product you have applied! A small sacrifice for a larger benefit! The last step was to water everything in for twenty minutes, then normal watering for the next few weeks! Thanks for watching Dad It Yourself!!! Check out the video! ** This post contains affiliate links and I will be compensated if you make a purchase after clicking on my links. ** Helpful/Mentioned Links: Amazon: Scotts Turf Builder EdgeGuard Mini Broadcast Spreader - Spreads Grass Seed, Fertilizer and Salt - Holds up to 5,000 sq. ft. of Scotts Grass Seed or Fertilizer Products: https://amzn.to/2F9G4ct Scotts Turf Builder Triple Action - Weed Killer & Preventer, Lawn Fertilizer, Prevents Crabgrass, Kills Dandelion, Clover, Chickweed & More, Covers up to 10,000 sq. ft, 50 lb: https://amzn.to/30FERBT Scotts Turf Builder Weed and Feed, 5,000 sq. ft.: https://amzn.to/3iodz8W Scotts Turf Builder Lawn Food Northern, 15,000 sq. ft.: https://amzn.to/2DJjBCj Ryobi RY18BPSA-0 18V ONE+ Cordless Backpack Sprayer (Bare Tool), 18 V: https://amzn.to/3fFZKRy Raw Organic Humic Fulvic Acid- Liquid Carbon - Root Hume- Simple Grow Solutions- Natural Lawn & Garden Treatment- Nutrient Plant Food Enhancer- Concentrated Turf Grass Soil Conditioner (32 Ounce): https://amzn.to/2Cfp7w2 Home Depot: Scotts 15,000 sq. ft. Turf Builder EdgeGuard DLX Broadcast Spreader for Seed, Fertilizer, and Ice Melt: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=100464267&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FScotts-15-000-sq-ft-Turf-Builder-EdgeGuard-DLX-Broadcast-Spreader-for-Seed-Fertilizer-and-Ice-Melt-76232%2F100464267&intsrc=PUI1_2950 Scotts Turf Builder 20.07 lb. 4,000 sq. ft. Triple Action Lawn Fertilizer: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=302681911&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FScotts-Turf-Builder-20-07-lb-4-000-sq-ft-Triple-Action-Lawn-Fertilizer-26003A1%2F302681911&intsrc=PUI1_2950 Scotts Turf Builder 15 lb. 5,000 sq. ft. Weed and Feed Lawn Fertilizer: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=205546050&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FScotts-Turf-Builder-15-lb-5-000-sq-ft-Weed-and-Feed-Lawn-Fertilizer-25006%2F205546050&intsrc=PUI1_2950 Scotts Turf Builder 12.6 lb. 5,000 sq. ft. Lawn Fertilizer: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=203120096&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FScotts-Turf-Builder-12-6-lb-5-000-sq-ft-Lawn-Fertilizer-22305%2F203120096&intsrc=PUI1_2950 RYOBI ONE+ 18-Volt Lithium-Ion Cordless 4 Gal. Backpack Chemical Sprayer - 2.0Ah Battery and Charger Included: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=303585241&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-ONE-18-Volt-Lithium-Ion-Cordless-4-Gal-Backpack-Chemical-Sprayer-2-0Ah-Battery-and-Charger-Included-P2840%2F303585241&intsrc=PUI1_2950 Music Credits: Lil Cookie by William Rosati [YouTube Audio Library - Royalty Free Music for YouTube Creators] https://www.youtube.com/watch?v=QLsm_0x_UqI Safety Net by Riot [Royalty Free Music for YouTube Creators] https://www.youtube.com/watch?v=faEtFGEqEAo Thinking of Us by Patrick Patrikios [YouTube Audio Library - Royalty Free Music for YouTube Creators] https://www.youtube.com/channel/UCTPI2hZYxoHtdGEpdFoaU5A Easy Lemon 60 Second by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1200077 Artist: http://incompetech.com/ Thanks for watching! Don’t forget to subscribe at www.youtube.com/DadItYourselfDIY Please consider Subscribing! #DadItYourselfDIY #DIY #Amazon #HomeDepot #ScottsLawn #Ryobi #RyobiNation #RyobiYard

The purpose of this video is to show you that you can add affordable pendant lights to your kitchen in 15 minutes!!! Remember when can lighting was all the rage! Everyone wanted them. Now it’s just a bunch of hot spotlights flooding your kitchen with indirect light. Well here is an easy way to add some task lighting to your island or other area that you want to highlight. No cutting holes in the ceiling or running wires! These pendant lights screw into an existing can light socket and cover a fixture up to six inches! Check out the video! ** This post contains affiliate links and I will be compensated if you make a purchase after clicking on my links. ** Helpful/Mentioned Links: Worth Home Products PBA-0011 Instant Pendant Recessed Light Converter Adapter Only - Brushed Bronze: https://amzn.to/3mhPGoO Clear Glass Shade, 5.67inch High, 5inch Diameter, 1.65inch Fitter, Pendant Lamp Shade Lighting Fixtures High Transmittance Lampshade with Smooth Rim: https://amzn.to/3gdIZQG Thanks for watching! Don’t forget to subscribe at www.youtube.com/DadItYourselfDIY #DadItYourselfDIY #DIY #Amazon #WorthHomeLighting

You can build deck furniture from your scraps! I recently completed a cedar deck project with a a pergola attached. It came out nice and was a lot of fun to build. The customer was a friend from work, and we had a blast building the project. In appreciation of all his help, I built him a deck cooler out of all the scraps and cut-offs, that frankly would have probably ended up in a fire pit. The purpose of this video is to show you with a few simple steps you can create a simple project for little of no cost using leftovers! I will not provide plans because you may have a different cooler in mind for your project. It is scalable! Check out the video! ** This post contains affiliate links and I will be compensated if you make a purchase after clicking on my links. ** Helpful/Mentioned Links: RYOBI 15 Amp 10 in. Sliding Compound Miter Saw: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=306939218&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-15-Amp-10-in-Sliding-Compound-Miter-Saw-TSS103%2F306939218&intsrc=PUI1_2950 RYOBI 18-Volt ONE+ Cordless AirStrike 18-Gauge Brad Nailer (Tool Only): https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=203810823&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-18-Volt-ONE-Cordless-AirStrike-18-Gauge-Brad-Nailer-Tool-Only-with-Sample-Nails-P320%2F203810823&intsrc=PUI1_2950 Other tools I use in my shop: https://www.dadityourselfdiy.com/2019/06/power-tools-i-use.html Thanks for watching! Don’t forget to subscribe at www.youtube.com/DadItYourselfDIY #DadItYourselfDIY #DIY #HomeDepot #Ryobi #RyobiNation #CedarDecking #BuildwithCedar

It's time to fix the lawn. I am the “Grasshole” in my neighborhood. I pressure my neighbors to have nice lawns not only to compete with mine, but because it makes our neighborhood nicer. I consistently offer unsolicited advice on lawn care to those that may or may not want it. In one such case, my neighbor had made a couple of missteps and needed some help. So, I took on her lawn as a project lawn. The purpose of this video is to show you with a few simple steps and a little time you can turn a weed infested dumpster fire of a yard into a beautiful and lush lawn you can be proud of! Check out the video! ** This post contains affiliate links and I will be compensated if you make a purchase after clicking on my links. ** Helpful/Mentioned Links: RYOBI 20 in. 40-Volt Brushless Lithium-Ion Cordless Battery Walk Behind Push Lawn Mower 5.0 Ah Battery and Charger Included: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=206481611&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-20-in-40-Volt-Brushless-Lithium-Ion-Cordless-Battery-Walk-Behind-Push-Lawn-Mower-5-0-Ah-Battery-and-Charger-Included-RY40180%2F206481611&intsrc=PUI1_2950 RYOBI ONE+ 18-Volt Lithium-Ion Cordless 1-Gal. Chemical Sprayer & Extra Accessory Tank - 1.3 Ah Battery and Charger Included: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=312431682&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-ONE-18-Volt-Lithium-Ion-Cordless-1-Gal-Chemical-Sprayer-Extra-Accessory-Tank-1-3-Ah-Battery-and-Charger-Included-P2810-1GAL%2F312431682&intsrc=PUI1_2950 Other lawn tools I use in my yard: https://www.dadityourselfdiy.com/2019/06/lawn-tools-i-use.html Thanks for watching! Don’t forget to subscribe at www.youtube.com/DadItYourselfDIY #DadItYourselfDIY #DIY #HomeDepot #Ryobi #RyobiNation #ScottLawn #LawnGoals #LawnNut

I recently had the opportunity to install a metal roof on a well house for a customer. This is not my first metal roof installation, but the first time I have done one this steep and tall. The customer had shingles originally but was set on metal, and I can see why. The installation was faster than shingles would have been, and metal will last a lot longer, at least 20 years longer in fact. I was very fortunate to have some help, the removal of the old shingles was relatively easy (you can install these over old shingles, but the homeowner preferred a fresh start, and we needed to repair some dry rot). This project took six 12-foot metal panels and the associated gable trim, ridge cap, and drip edges. We did this project over two days, but it only took about 10 hours. With some help an early start, a small building can have a new metal roof in a day, easily. It is an intermediate level project that any homeowner can tackle to upgrade a small outbuilding or shed. If you are thinking a larger building with multiple angles or a home, consider hiring a metal roofing professional. Check out the video! ** This post contains affiliate links and I will be compensated if you make a purchase after clicking on my links. ** Helpful/Mentioned Links: Fabral Metal Roofing @ Home Depot: https://homedepot.sjv.io/V1AdE Other tools I use in my shop: https://www.dadityourselfdiy.com/2019/06/power-tools-i-use.html Music Credits: Dirty Mac by Endless Love [Royalty Free Music For YouTube Creators] https://www.youtube.com/channel/UCVt9qwFDS1YvKes7XSfd1OQ Inevitable Hope by RKVC [Royalty Free Music For YouTube Creators] https://www.youtube.com/channel/UCowgKeMGXKY038qwuf3yYlw Happy Alley by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100482 Artist: http://incompetech.com/ Thinking of Us by Patrick Patrikios [YouTube Audio Library - Royalty Free Music for YouTube Creators] https://www.youtube.com/channel/UCTPI2hZYxoHtdGEpdFoaU5A Ibiza by MBB (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: https://youtu.be/DLkX0UJ90Wo Thanks for watching! Don’t forget to subscribe at www.youtube.com/DadItYourselfDIY #DadItYourselfDIY #Handyman #DIY #HomeDepot #Ryobi #Ryobination #Fabrel #MetalRoof

This is my review of the Ryobi Biscuit Joiner. I just bought this and have been trying it out on a a custom shadow box I am building that requires a glued-up panel that’s 18” x 24” of 3/4” red oak. While the length wasn’t an issue, they don’t sell 18” wide boards at the local home center, so I have to make my own, by joining multiple boards together. The job to do this to ensure alignment, a flat and true surface, and the added benefit of a stronger edge joint goes to the biscuit joiner. This tool creates a small horizontal slot in the edge of a board at a consistent level, after which you add glue and small wooden wafers in the slots. The wafers absorb some of the glue, then swell up and the glue dries, locking the two edges together perfectly aligned. It’s almost magic. Who invents this stuff?! If you are in the market for a biscuit joiner you are going to want to watch this video. This tool is an amazing price point of just $119.00, it is $60 or $80 less than the competing DeWalt and Makita biscuit joiners and produces the exact same results. It’s a no-brainer to buy one, and end of discussion if you are going to be doing glued up panels in your shop, add this to your arsenal! Check out the video! ** This post contains affiliate links and I will be compensated if you make a purchase after clicking on my links. ** Helpful/Mentioned Links: RYOBI JM83K 6 Amp AC Biscuit Joiner Kit with Dust Collector and Bag: https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=301289961&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-6-Amp-AC-Biscuit-Joiner-Kit-with-Dust-Collector-and-Bag-JM83K%2F301289961&intsrc=PUI1_2950 RYOBI A05WB21 #20 FSC Wood Biscuits (100-Piece): https://homedepot.sjv.io/c/1421667/459920/8154?prodsku=205448372&u=https%3A%2F%2Fwww.homedepot.com%2Fp%2FRYOBI-20-FSC-Wood-Biscuits-100-Piece-A05WB21%2F205448372&intsrc=PUI1_2950 Other tools I use in my shop: https://www.dadityourselfdiy.com/2019/06/power-tools-i-use.html Thanks for watching! Don’t forget to subscribe at www.youtube.com/DadItYourselfDIY #DadItYourselfDIY #Handyman #DIY #HomeDepot #Ryobi #Ryobination #Woodworker #Woodworking