Doggorunning

CONTACT ME HERE; E mail: ndi91108@yahoo.com sponsor the channel; E mail: ndi91108@yahoo.com

KORE https://www.koreessentials.com/

CONTACT ME HERE; E mail: ndi91108@yahoo.com sponsor the channel; PATRON: https://www.patreon.com/doggorunning E mail: ndi91108@yahoo.com

The M1903 Mark I, also known as the M1903 Springfield Mark I, was a variant of the M1903 Springfield rifle used by the United States military during World War I and World War II. Here are some interesting facts about the M1903 Mark I: Pedersen Device: The M1903 Mark I was specifically modified to accommodate the Pedersen Device, an experimental semi-automatic conversion kit. The Pedersen Device was designed to convert the bolt-action rifle into a semi-automatic firearm capable of firing a smaller .30 caliber pistol cartridge, the .30 Pedersen. Limited Production: The M1903 Mark I had a relatively limited production compared to the standard M1903 Springfield. Approximately 65,000 M1903 rifles were converted to the Mark I configuration between 1918 and 1919. Mark I Rear Sight: The Mark I variant featured a modified rear sight design. The original ladder-style rear sight of the M1903 was replaced with a new aperture sight mounted on the left side of the receiver. This aperture sight was offset to accommodate the Pedersen Device's ejection mechanism. Abandoned Pedersen Device: The Pedersen Device project was ultimately abandoned due to the end of World War I and the signing of the Treaty of Versailles in 1919. The Pedersen Device, along with the M1903 Mark I rifles already converted, were recalled and the devices were destroyed. The M1903 Mark I rifles were then converted back to the standard M1903 configuration. Collectible Rarity: Due to the limited production and subsequent conversion back to the standard M1903, the M1903 Mark I rifles are considered rare and highly sought after by collectors and enthusiasts. The unique history and association with the Pedersen Device make them particularly valuable. It's worth noting that the M1903 Mark I is just one variant of the M1903 Springfield, which itself has a rich history and was widely used by the U.S. military during both World Wars.

The M1903 Mark I, also known as the M1903 Springfield Mark I, was a variant of the M1903 Springfield rifle used by the United States military during World War I and World War II. Here are some interesting facts about the M1903 Mark I: Pedersen Device: The M1903 Mark I was specifically modified to accommodate the Pedersen Device, an experimental semi-automatic conversion kit. The Pedersen Device was designed to convert the bolt-action rifle into a semi-automatic firearm capable of firing a smaller .30 caliber pistol cartridge, the .30 Pedersen. Limited Production: The M1903 Mark I had a relatively limited production compared to the standard M1903 Springfield. Approximately 65,000 M1903 rifles were converted to the Mark I configuration between 1918 and 1919. Mark I Rear Sight: The Mark I variant featured a modified rear sight design. The original ladder-style rear sight of the M1903 was replaced with a new aperture sight mounted on the left side of the receiver. This aperture sight was offset to accommodate the Pedersen Device's ejection mechanism. Abandoned Pedersen Device: The Pedersen Device project was ultimately abandoned due to the end of World War I and the signing of the Treaty of Versailles in 1919. The Pedersen Device, along with the M1903 Mark I rifles already converted, were recalled and the devices were destroyed. The M1903 Mark I rifles were then converted back to the standard M1903 configuration. Collectible Rarity: Due to the limited production and subsequent conversion back to the standard M1903, the M1903 Mark I rifles are considered rare and highly sought after by collectors and enthusiasts. The unique history and association with the Pedersen Device make them particularly valuable. It's worth noting that the M1903 Mark I is just one variant of the M1903 Springfield, which itself has a rich history and was widely used by the U.S. military during both World Wars.

There are a few reasons why the Baofeng UV-5R has gained popularity: Affordability: The Baofeng UV-5R offers a low-cost option for individuals interested in getting started with amateur radio or needing a portable two-way radio for communication purposes. Compared to other handheld radios on the market, the Baofeng UV-5R provides a relatively inexpensive option. Dual Band Operation: The UV-5R supports dual-band operation, allowing users to transmit and receive on both the VHF (Very High Frequency) and UHF (Ultra High Frequency) bands. This flexibility enables communication on a wide range of frequencies, making it suitable for various applications, including amateur radio, emergency communication, outdoor activities, and more. Wide Frequency Range: The UV-5R offers a broad frequency range, covering a significant number of frequencies. It supports both analog FM and digital modes, allowing users to access various radio services and frequencies, including public safety, amateur radio bands, marine channels, and more. Programmability and Customization: The UV-5R is programmable, meaning users can manually program their desired frequencies or use software to program the radio. This feature allows for customization and easy access to frequently used channels, making it convenient for different communication needs. Features and Accessories: The Baofeng UV-5R comes with a range of features, including a built-in flashlight, dual-watch function, VOX (Voice-Activated Transmit), scanning capabilities, and more. Additionally, a wide variety of accessories are available for the UV-5R, such as extended batteries, external antennas, speaker microphones, and car chargers, further enhancing its versatility and usability. It's important to note that while the Baofeng UV-5R has gained popularity for its affordability and features, it's crucial to comply with local regulations and licensing requirements regarding radio operation to ensure legal and responsible use.

motion sensing lights can be a useful addition to your home security measures. Here are some reasons why motion sensing lights are considered beneficial: Deterrence: Motion sensing lights act as a deterrent by illuminating the surrounding area when motion is detected. Intruders are more likely to be deterred from approaching a well-lit area as they are more likely to be seen by neighbors or passersby. Enhanced Visibility: Motion sensing lights provide improved visibility around your property, especially during nighttime hours. This can help you and others identify any potential threats or suspicious activity. Convenience: Motion sensing lights can provide convenience by automatically turning on when you approach your home or outdoor areas. They eliminate the need to manually operate the lights and can provide added safety when entering or leaving your property. Energy Efficiency: Many motion sensing lights are designed with energy-saving features, such as LED technology or adjustable sensitivity settings. They only activate when motion is detected, reducing unnecessary energy consumption. Notification: The activation of motion sensing lights can serve as a visual alert for homeowners. If the lights unexpectedly turn on, it can indicate that someone is approaching or near your property, allowing you to be more vigilant and take appropriate action. When installing motion sensing lights, consider placing them strategically around entry points, such as front and back doors, garage entrances, and pathways leading to your home. It's also important to position the lights at a suitable height and angle to optimize their effectiveness. While motion sensing lights can be a valuable addition to your home security measures, they should ideally be used in combination with other security measures like alarms, security cameras, and strong locks to provide comprehensive protection for your property.

highest number of recorded patents: United States: The United States has consistently been one of the leading countries in terms of patent filings and grants, with a significant number of patents across various industries. Japan: Japan is known for its strong innovation culture and has a robust patent system. It has a high number of patents, particularly in sectors such as electronics, automotive, and robotics. China: China has been rapidly increasing its number of patents in recent years. With its focus on technological advancement and innovation, China has become a major player in patent filings, especially in areas like telecommunications, electronics, and renewable energy. South Korea: South Korea is recognized for its strong technological advancements, particularly in the electronics and semiconductor industries. It consistently ranks among the top countries for patent filings. Germany: Germany is known for its strong industrial and engineering sectors. It has a significant number of patents, particularly in fields such as automotive engineering, machinery, and pharmaceuticals. France: France has a notable presence in the global patent landscape, particularly in sectors like aerospace, telecommunications, and transportation. United Kingdom: The United Kingdom has a significant number of patents, with contributions from various industries such as pharmaceuticals, aerospace, and technology. Switzerland: Switzerland is recognized for its strong presence in patent filings, particularly in sectors like pharmaceuticals, biotechnology, and medical devices. Netherlands: The Netherlands has a robust innovation ecosystem, with a substantial number of patents filed in sectors such as agriculture, renewable energy, and water management. Sweden: Sweden has a strong reputation for innovation, with a notable number of patents in areas such as telecommunications, manufacturing, and medical technology. Please note that patent filings can vary from year to year, and it's advisable to refer to updated sources or patent databases for the most current and accurate information on patent records in different countries.

This is what’s left after a submarine explodes at 1 mile below the surface

This is what happens when a submarine explodes 1 mile below the surface

short-handled sickle, known as a "kama," has a history of being used as a weapon in Japan. The kama is a farming tool that was repurposed and adapted for self-defense by peasants and commoners during feudal times. In rural areas where access to conventional weapons was limited, farmers and villagers would utilize the tools they had available, including the kama, to defend themselves. The kama's curved blade and sharp point made it suitable for both farming and combat purposes. During conflicts, uprisings, or in cases of self-defense, peasants would often modify their agricultural sickles by reinforcing the handle or attaching it to a longer pole, transforming it into a makeshift weapon. With the modified kama, they could strike, slash, or hook opponents, using its curved blade to disarm or incapacitate them. The kama was particularly favored by individuals skilled in martial arts, such as practitioners of the martial art called "Kusarigama-jutsu," which involved the use of a kusarigama—a sickle attached to a chain or rope with a weight at the other end. It's important to note that the use of the kama as a weapon was primarily seen in historical contexts. In modern times, the kama is predominantly used as a tool for farming and gardening rather than as a weapon.

Boiled linseed oil is a popular natural finish and wood preservative. Here are some facts about boiled linseed oil and its uses: Production: Boiled linseed oil is derived from the flax plant (Linum usitatissimum) through a process called polymerization. The oil is heated and combined with certain drying agents, such as metallic salts or lead compounds. This process speeds up the drying time and enhances the oil's performance as a finish. Drying Time: Compared to raw linseed oil, boiled linseed oil dries much faster. It typically forms a tack-free film within 12 to 24 hours, depending on environmental conditions. Wood Finish: Boiled linseed oil is commonly used as a wood finish. It enhances the natural beauty of wood by bringing out its grain patterns and adding a warm, amber tone to the surface. Preservative: Due to its ability to penetrate wood fibers, boiled linseed oil acts as a wood preservative, protecting it against moisture, rot, and insect damage. It helps to seal the wood and slow down its deterioration. Outdoor Use: Boiled linseed oil is suitable for both indoor and outdoor applications. It can be used on exterior wood surfaces, such as decks, fences, and garden furniture, to provide protection against weathering. Metal Protection: Boiled linseed oil can also be used as a rust inhibitor and protective coating for metal surfaces. It forms a thin film that helps prevent oxidation and corrosion. Mixing with Solvents: Boiled linseed oil can be mixed with solvents like mineral spirits or turpentine to create a more workable consistency. This mixture is often used as a wiping varnish for furniture or as a conditioner for wooden tools and handles. Artist Medium: Artists sometimes use boiled linseed oil as a medium for oil painting. It can be mixed with pigments to create glazes, improve flow, and enhance the glossiness of oil-based paints. Leather Conditioning: Boiled linseed oil can be applied to leather products, such as belts, shoes, and saddles, to condition and moisturize the leather, keeping it supple and preventing cracking. Caution: Boiled linseed oil generates heat during the drying process, which can cause spontaneous combustion if improperly disposed of. Rags or materials soaked in boiled linseed oil should be spread out or soaked in water to prevent fire hazards. Remember to follow the manufacturer's instructions and safety guidelines when using boiled linseed oil, and always test it on a small inconspicuous area before applying it to larger surfaces.

good video on training https://www.youtube.com/watch?v=_1yGAxUY5VI

To calculate the approximate increase in distance for a given reduction in sound level, we can use the inverse square law, which states that the intensity of sound decreases by 6 dB for every doubling of the distance from the sound source. In the example you provided, let's consider a reduction of 15 dB from the initial sound level of 100 dB. Since each 6 dB reduction corresponds to doubling the distance, we can calculate the additional distance as follows: 15 dB reduction = 15 dB / 6 dB = 2.5 doublings Doubling the distance 2.5 times is equivalent to multiplying the initial distance by 2.5. So, based on this estimation, a 15 dB reduction from 100 dB would allow you to be approximately 2.5 times farther away than the initial distance of 100 feet. Therefore, the additional distance would be approximately 2.5 x 100 feet = 250 feet. Again, please note that this estimation is based on the inverse square law and does not account for specific environmental factors or obstacles that may affect sound propagation. It's always advisable to consult with acoustic professionals or conduct specific measurements in the given environment for accurate results.

always go over these situations before handing a gun to a young or new shooter

Technically, it is possible to attach a silencer, also known as a suppressor, to some revolvers. However, there are several important factors to consider before attempting to do so. Revolver Design: Most revolvers have a cylinder gap between the barrel and the cylinder, which allows gases to escape when the firearm is discharged. This gap can significantly reduce the effectiveness of a suppressor, as it allows noise and gases to escape. Some modern revolvers, such as the Nagant M1895, were designed with a gas-sealing mechanism specifically for suppressor use. Legal Considerations: The legality of attaching a suppressor to a revolver depends on the laws and regulations of your jurisdiction. In many countries, suppressors are highly regulated and require specific permits or licenses. Before attempting to modify a firearm with a suppressor, it is essential to research and comply with the applicable laws in your area. Compatibility: Even if a suppressor can be attached to a revolver, you need to ensure that the suppressor is compatible with the specific model and caliber of the revolver. Suppressors are typically designed for specific calibers, and using the wrong suppressor can be dangerous and potentially damage the firearm. Barrel Length: Suppressors can add significant length and weight to a firearm, which may affect the balance and handling of a revolver. It is important to consider the overall length and weight of the firearm when attaching a suppressor. Performance: Revolvers typically have a louder muzzle blast compared to semi-automatic pistols due to the cylinder gap and the larger cartridge chambers. While a suppressor can reduce the noise and muzzle flash to some extent, it may not provide the same level of noise reduction as when used with a semi-automatic firearm. Before attempting to attach a suppressor to a revolver, it is advisable to consult with a knowledgeable firearms expert or gunsmith who can provide guidance specific to your revolver model and local regulations.

Los Angeles, California has a diverse history, and while there have been occasional reports of satanic activities or claims of satanic cults, such occurrences have generally been rare and isolated incidents. It is important to note that most of these reports have not been substantiated or have been debunked. In the 1980s, there was a nationwide moral panic known as the "Satanic Panic," where there were allegations of widespread satanic rituals and abuse taking place, including in Los Angeles. These allegations often involved claims of child abuse, ritualistic killings, and underground cults. However, extensive investigations conducted at the time found little evidence to support these claims, and many of the cases were eventually discredited or dismissed. One notable case related to satanic activity in Los Angeles was the McMartin preschool trial, which occurred from 1984 to 1990. It was one of the longest and most expensive criminal trials in U.S. history. The case centered around accusations of child molestation and satanic ritual abuse at the McMartin preschool in Manhattan Beach, a suburb of Los Angeles. Ultimately, the trial ended without any convictions, and most of the charges were dropped due to lack of evidence and the reliability of the testimonies. Since then, there have been occasional reports of alleged satanic activities or rituals, but these incidents have been isolated and not indicative of any widespread satanic presence. It is important to approach such claims with skepticism and critical thinking, as they often stem from moral panics, urban legends, or conspiracy theories rather than concrete evidence. Overall, while there have been occasional reports and allegations of satanic activity in Los Angeles, they have been rare and often debunked or dismissed. It is essential to distinguish between genuine criminal activities and unfounded claims that can perpetuate unnecessary fear and panic. Then we have the Dodgers give them a Stadium. So is this an urban legend anymore?

We found it! Hidden deep in the Mountains of the California's We also saw some BIG Horn Sheep

This will work on all variant type UV 5R Radios

dangerous to shoot firearms in or towards icy surfaces. Shooting at or into ice can result in unpredictable ricochets or bullet fragmentation, which can pose a significant risk to anyone nearby. Bullets can deflect off the ice at unexpected angles, potentially causing harm to people or objects in the vicinity. Safety should always be the top priority when handling firearms. It is crucial to follow proper shooting practices and ensure you have a safe backstop or target area that can contain and absorb the bullets safely. Shooting at hard or reflective surfaces like ice, rocks, or water is generally not recommended due to the increased risk of ricochets. If you are participating in shooting sports or activities, it is essential to adhere to the rules and guidelines set forth by the governing bodies and follow the instructions provided by trained professionals. They can provide appropriate guidance on safe shooting environments and practices to minimize risks and ensure everyone's safety.

Bullets can spin on ice due to a phenomenon known as the "gyroscopic effect" or "spin stabilization." When a bullet is fired from a rifled barrel, it is given a spin by the rifling, which are spiral grooves cut into the inside of the barrel. This spin helps stabilize the bullet in flight, improving its accuracy and range. When a bullet strikes a hard surface like ice, it can cause the bullet to deform slightly or fragment upon impact. As the bullet interacts with the ice, the uneven forces applied to different parts of the bullet can cause it to start rotating or spinning. This spinning motion is similar to the original spin imparted by the rifling but may not be as stable or consistent. The spin of the bullet helps to counteract destabilizing factors such as aerodynamic forces and imperfections in the bullet's shape. It improves the bullet's stability, allowing it to maintain a more predictable trajectory as it travels through the air. The spinning motion helps the bullet resist tumbling or wobbling, which could lead to erratic flight paths. However, it's important to note that bullets spinning on ice is not a common occurrence during normal shooting scenarios. This situation might be more likely in specific circumstances, such as when shooting on a very smooth or slippery ice surface, or when the bullet strikes the ice at a specific angle or with certain characteristics that induce spin.

Sushi time! My family is in Japan

The responsibility for caring for graves in the United States typically falls under a combination of different entities, depending on various factors such as ownership, location, and historical significance. Here are some common scenarios: Private Ownership: In many cases, graves are privately owned. In such instances, it is the responsibility of the owner, usually the deceased person's family or descendants, to maintain and care for the graves. Private owners may choose to clean, repair, and upkeep the gravesites themselves or hire professional caretakers or restoration experts. Cemetery Management: Cemeteries, both public and private, often have management organizations or governing bodies responsible for their maintenance and operation. These entities may employ staff or contract third-party companies to ensure the upkeep of the cemetery, including the graves. They are responsible for general maintenance, landscaping, and addressing any issues related to the graves within the cemetery grounds. Historical Preservation Organizations: If the graves have historical or cultural significance, they may be under the purview of historical preservation organizations, local historical societies, or even government agencies. These organizations may take on the responsibility of preserving and restoring historic gravesites as part of their mission. They may allocate funds for restoration projects or seek grants and donations to support the maintenance of these sites. Local Government: In certain cases, particularly for abandoned or neglected cemeteries where ownership is unclear or gravesites have been abandoned, local government authorities may step in. The responsibility may fall to the municipality, county, or state, depending on the jurisdiction. Local governments may allocate resources or establish programs to restore and maintain neglected gravesites. It's important to note that the division of responsibility can vary depending on the specific cemetery and its location. Laws and regulations regarding grave care and ownership may also differ from state to state. If you encounter graves in poor condition and are concerned, you can reach out to the cemetery management, local historical society, or local government offices for guidance on the appropriate steps to take.

Ball ammo and hollow point ammo are two different types of ammunition commonly used in firearms. Here are the main differences between the two: Design and Purpose: Ball Ammo: Ball ammunition, also known as full metal jacket (FMJ) ammo, features a soft lead core surrounded by a harder metal jacket. It has a rounded or pointed tip and is designed primarily for target practice, training, and military use. The metal jacket helps prevent barrel fouling and improves feeding reliability. Hollow Point Ammo: Hollow point ammunition has a cavity or hollowed-out tip in the bullet, which is designed to expand upon impact. This expansion creates a larger wound channel and transfers more energy to the target. Hollow point ammo is commonly used for self-defense and law enforcement purposes. Terminal Performance: Ball Ammo: Ball ammunition is designed to penetrate targets without excessive expansion. It typically creates a clean hole through the target due to its lack of expansion. While it can cause significant damage, its main advantage is its ability to penetrate barriers and maintain its trajectory. Hollow Point Ammo: Hollow point ammunition is specifically engineered for maximum stopping power. Upon impact, the hollow point bullet expands, causing the bullet to deform and create a larger wound channel. This expansion helps transfer more energy to the target and increases the chances of stopping a threat effectively. Overpenetration and Collateral Damage: Ball Ammo: Ball ammunition has a higher likelihood of overpenetration, meaning it may pass through the target and potentially hit unintended targets behind it. This can pose a risk in situations where bystanders or innocent individuals may be present. Hollow Point Ammo: Hollow point ammunition is designed to minimize overpenetration. The expansion of the bullet upon impact reduces the likelihood of the bullet passing through the target and causing collateral damage. Legal Considerations: Ball Ammo: Ball ammunition is widely available and legal for civilian use in most jurisdictions. It is commonly used for recreational shooting, target practice, and competition. Hollow Point Ammo: The legality of hollow point ammunition can vary depending on local laws and regulations. While it is generally legal for self-defense and law enforcement purposes, it may be restricted or prohibited in some jurisdictions. It's important to note that the choice between ball ammo and hollow point ammo depends on the intended use, legal restrictions, and personal preferences. Always consult local laws and regulations regarding ammunition types before purchasing or using them.

FOOD, food like this makes you GROW BIG!