Want To Enter Valhalla? You'll Need This Epic Viking Seax...
⭐Vote Here - https://forms.gle/GndfcvN6oLRwB3qz8 - for your favorite build! This Viking Challenge was a blast! Hope yall enjoyed my ball bearing damascus take-down SEAX!
⭐ Sponsors:
Maritime Knife Supply: https://maritimeknifesupply.ca/
Knifeprint: https://knifeprint.com/
Mosa US: https://mosaus.com/
🥊Participating Channels:
@BKohnKnives @BlackBeardProjects @DiesInEveryFilm @FarawayForge @GreenBeetle @cutelariaharpia @leppicknives9830 @Mysticmountainforge @NjordArtisan @PJTForging @ThatWorks @TheArtofCraftsmanship @theriversexperience9383 @TyrellKnifeworks
📹Judge Channels:
@OldHickory @JPsBladeworks @RainyDayForge @HeavyForge @TonySeverioKnives
📋To enter as a Viewer:
https://docs.google.com/document/d/1NRcKaNBRCLQFAdiKIChWfcgkvvZ7qrhIgScYBy_NL7U/edit?usp=sharing
🛠 Notable Items and Tools:
ComMarker B4 20W Fiber Laser (discount code = redbeardops) - https://commarker.com/product/b4-laser-engraver/?ref=HSxwS-ki0lqGqf
Wicked Edge Pro - https://amzn.to/4c0Ulmr
My Favorite FILE - https://amzn.to/3rRiWYF
1/4'' Ball Bearings - https://amzn.to/46wdXw1
1/8'' Ball Bearings - https://amzn.to/3NYVTDr
Long Gooseneck Light - https://amzn.to/3fcEyYO
Buffer - https://amzn.to/3BPLbrF
Large Face Mill - https://amzn.to/3ZQgMFw
3M Versaflo Respirator - https://amzn.to/3HLbz89
Gator Piss - https://www.gatorpiss.shop/
Orion Sanding Stick - https://maritimeknifesupply.ca/products/orion-sanding-stick
Oleg Wood - https://knife-wood.com/
🗡️ RBO Knives For Sale - https://redbeardops.square.site/s/shop
🙏 Become a RBO Patron - https://www.patreon.com/RedBeardOps
YT Knifemaker Facebook Group: https://www.facebook.com/groups/735742651119526/
🙏All RBO Social Media Links: https://linktr.ee/redbeardops
✖️RBO X: https://twitter.com/RedBeardOps
#redbeardops #ytvikingchallenge #vikingknfie
00:00 - Canister Damascus
02:17 - Blade Forging
03:11 - Rough Grinding
04:23 - Heat Treating
06:14 - Plunge Grinds
07:31 - Performance Testing
08:25 - Prepping Fittings
09:58 - Guard Fitting
13:35 - Rough Fitting Handle Parts
17:23 - Alignment Pin Installs
20:15 - Handle Bedding
21:24 - Final Handle Shaping
24:59 - Blade Finishing & Maker's Mark
25:49 - Etching
26:15 - Sharpening & Assembly
26:50 - Final Thoughts
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
109
views
CGM Results After 4 Years of The Carnivore Diet | Continuous Glucose Monitor
Here are my CMG results as a 4 year carnivore. Hope yall like excel!
I've been eating a carnivore diet since 2019 and was keto for years before that. My activity was almost exclusively powerlifting movements before 2020 which is when I started BJJ. I now consume around 3 pounds of beef a day with eggs, train BJJ 3 days a week and have 4 weight lifting seasons a week.
Major thanks to @ShawnBakerMD for setting me down this path!
#carnivore #carnivorediet #glucosemonitoring
Music from Uppbeat (free for Creators!):
https://uppbeat.io/t/avbe/night-in-kyoto
License code: AYLFUKRDZKL1U6GF
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
165
views
Open Sourcing My Knife Templates | FREE Knife Making Design Library
I really hope yall get some value out of the first RBO file library release! More to come... Let me know in the comments if you do; Cheers!
⚡️ Download Templates Here - https://drive.google.com/drive/folders/12b14sK6I0dyNY95QJwlRDTtokrGRK9Jl?usp=drive_link
REED ME TEXT:
12/16/2023 - Release of Version 1.0:
*************************************
This file release will be of knives built on the Red Beard Ops youtube channel in and before 2020 (and a few of them from 2021...).
Note many of these designs took strong inspiration from others in the knife making community. Most notably the Simple Little Life build along kitchen knife (2019) and the Cleaver Neck Knife (2020) (which was inspired by Walter Sorrells Feather neck knife).
@WalterSorrellsBlades @Simplelittlelife
*************************************
For all intents and purposes, I consider these files public domain. Share them at will! The only request I have are to a.) not sell the files themselves and b.) let people know you got them from RBO when sharing. :) Also if you're using these for your first knives, I'd love to be tagged on the socials so I can see your work!
*************************************
🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps
🔸 RBO Site - https://redbeardops.square.site/
🙏Follow RBO on Social Media - https://linktr.ee/redbeardops
✖ | Twitter - https://twitter.com/RedBeardOps
#redbeardops
#knifemaking
#knifemaker
Music from Uppbeat (free for Creators!):
https://uppbeat.io/t/moire/new-life
License code: 72A8BDVESA7MWZOV
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
161
views
Are 3D Printers Good For Knife Making? | Bambu P1P
How I use my Bambu Labs P1P 3D printer for knife making! The sky is the limit with these printers! Very happy I bought this machine... really opens your mind to fun possibilities!
🔸 Height Scribe 3D Print Etsy - https://www.etsy.com/listing/1613396295/height-scribe-jig-fixture-for-3-2-1
🔸 Height Scribe 3D Print Patreon - https://www.patreon.com/posts/3d-print-files-93074662?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link
🔸 My Printables Profile - https://www.printables.com/@RedBeardOps
⭐ Items:
Bambu P1P - https://bambulab.com/en/p1?product=p1p
P1P to P1S Upgrade Kit - https://store.bambulab.com/products/p1p-to-p1s-upgrade-kit
Gulso Bolts - https://www.makermaterialsupply.com/collections/gulso-bolts
3-2-1 Blocks - https://amzn.to/3QqvhLY
inLand PLA+ - https://amzn.to/3FBOl4y
eSun PETG - https://amzn.to/460ZaIw
🔸 RBO Site - https://redbeardops.square.site/
🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps
🙏 All Social Media Links: https://linktr.ee/redbeardops
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
Facebook: https://www.facebook.com/RedBeardOps
#redbeardops #3dprinting #3dprinter
Music from Uppbeat (free for Creators!):
https://uppbeat.io/t/matrika/light-study
00:00 - Intro / Setup
02:38 - 3D Printed Scales
07:53 - 3D Fittings Templates
08:40 - Height Scribe Prototype
10:17 - Printables / Final Thoughts
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
236
views
1
comment
Engineering Meets Knife Sharpening 🔪 Wicked Edge Generation 4 PRO Review
Wicked Edge has released their brand new top of the line generation 4 PRO sharpening system! Today I'll be comparing the gen 4 pro side by side against it's predecessor the generation 3 pro.
⭐ Buy Wicked Edge Direct - https://wickededgeusa.com/collections/sharpeners
⭐ Buy Wicked Edge on Amazon - https://amzn.to/45XUu63
🎬 Wicked Edge Gen 3 PRO Review - https://youtu.be/R9K7idCh_VU
🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps
🔸 Knives For Sale - https://redbeardops.square.site/s/shop
🗡 Knife Builds:
Twist Damascus Bowie - https://youtu.be/g19hDroWuDY
Fantasy Challenge Knife - https://youtu.be/N9VmPedKFvM
Bitcoin Knife - https://youtu.be/_Ph_LYE6Gcc
⭐ How To Videos:
Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY
DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
Facebook: https://www.facebook.com/RedBeardOps
#redbeardops
#knifesharpening
#sharpener
@WickedEdgePrecisionSharpeners
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
83
views
Are Cheap Anvils Any Good? | VEVOR 132 LB Anvil Review & Anvil Stand Build
This is a thorough test of the 132 lb anvil from Vevor! Does a cheap anvil make a good starter anvil for beginner blacksmiths and knife makers? We'll find out! In addition I'll be building a beefy anvil stand as well...
⚡️ VEVOR 132 LBS Anvil (Amazon) - https://amzn.to/47JJI4D
⚡️ VEVOR 132 LBS Anvil (Vevor Site) (Discount Code VVSALE5 for 5% off) - https://s.vevor.com/bfQD2H
⚙️ Free CAD Files - https://www.patreon.com/posts/vevor-anvil-and-93457675
💡 Other Items Shown / Used:
Drill Tap (3/8-16) - https://amzn.to/3SR9qQr
Tap Socket Set - https://amzn.to/3T5sE5d
5/8'' Carbide Hole Saw - https://amzn.to/3umWmbs
Hardness Files - https://amzn.to/3SNFLYl
Chop Saw (Evolution) - https://amzn.to/46m9dbb
Fireball Squares - https://fireballtool.com/collections/squares
Pump Oiler Bottle - https://amzn.to/3SLAvEy
Welding Sleeves - https://amzn.to/3G6K0ql
⚔️ Knife Builds:
Japanese Short Sword - https://youtu.be/l_cJ35x7USA
Kitchen Knife Build - https://youtu.be/YQKTA_qjuSU
Twist Damascus Bowie - https://youtu.be/g19hDroWuDY
🙏All Social Media Links: https://linktr.ee/redbeardops
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
Facebook: https://www.facebook.com/RedBeardOps
#redbeardops #VEVOR #knifemaking
Music from uppbeat (free for Creators!):
https://uppbeat.io/t/asher-lee/dance-with-me
00:00 - Intro / Motivation
01:32 - Stand Build
07:43 - Initial Impressions
10:35 - Hardness Files
11:46 - Ball Bearing Testing
14:06 - Using The Anvil
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
102
views
SEAR Steaks Like A PRO | Bighorn Infrared Grill Review
I bought this grill hoping to elevate my steak searing.... and it didn't disappoint!
⭐ Product Links:
Big Horn Grill - https://amzn.to/3Q15iKL
Grill Cover - https://amzn.to/3QjOXCk
Table - https://amzn.to/3s1RveN
MEATER Probe - https://amzn.to/3rUvcYt
🙏All Red Beard Socials Links - https://linktr.ee/redbeardops
🙏 Become a Patron - https://www.patreon.com/RedBeardOps
🎤 Music Used:
https://uppbeat.io/t/abbynoise/lost-in-you
#cookingsteak #cookingtips #ottogrillalternative
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
Arrow Icon - https://www.freeiconspng.com/img/36962
82
views
1
comment
A NEVER Before Seen Traditional Japanese Sword | The Rise of the "Bow-Kizashi"
🥷 VOTE HERE - https://forms.gle/qTJEULQwGLae4Su5A
Samurai Meets West,
From Japan to Texas' plains,
Two worlds become one.
⭐ Challenge Sponsors:
Maritime Knife Supply: https://maritimeknifesupply.ca/
Knifeprint: https://knifeprint.com/
Mosa US: https://mosaus.com/
B.Kohn Knives: https://www.bkohnknives.com/
DIY Europe: https://www.diyeurope.eu
118Blades: https://www.118blades.co.uk
📹The Judge's Channels:
@TyrellKnifeworks @BlackBeardProjects @OldHickoryForge @FarawayForge
🥊The Competing Channels:
@BKohnKnives @HeavyForge @JPsBladeworks @leppicknives9830 @NjordArtisan @PJTForging @RainyDayForge @TheArtofCraftsmanship @theriversexperience9383 @TonySeverioKnives
🗡️ RBO Knives For Sale - https://redbeardops.square.site/s/shop
🙏 Become a RBO Patron - https://www.patreon.com/RedBeardOps
🛠 Notable Items and Tools:
Wicked Edge Pro - https://amzn.to/48L20nk
7'' Cutting Wheels - https://amzn.to/3PPAxrU
My Favorite FILE - https://amzn.to/3rRiWYF
KHDaily Straightening Hammer - https://khdailyknives.com/shop/shop/knifemaking/carbidestraighteninghammer/
Sunshine Cloth - https://amzn.to/3tonYwf
1/4'' Power Tap - https://amzn.to/3POd1eZ
xTool D1 20W Laser Kit -https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=RedBeardOps&utm_medium=4938&utm_source=influencer
3M Versaflo Respirator - https://amzn.to/3HLbz89
Long Gooseneck Light - https://amzn.to/3fcEyYO
Buffer - https://amzn.to/3BPLbrF
1/8'' Copper Bar - https://amzn.to/3ZTwlME
Large Face Mill - https://amzn.to/3ZQgMFw
Mud Pan For Coffee Etch - https://amzn.to/3PLXZqe
🎤 Music Used:
https://uppbeat.io/t/ilya-kuznetsov/collision - License code: JPVICK1A7T0WE7OQ
https://uppbeat.io/t/zac-tiessen/eastern-journey - License code: US17J4E7RTXOJT1S
https://uppbeat.io/t/simon-folwar/moonlake
https://uppbeat.io/t/monument-music/asian-spirit
https://uppbeat.io/t/hlfmn/flowing-waters
https://uppbeat.io/t/vens-adams/alone-in-kyoto
https://uppbeat.io/t/all-good-folks/heart-of-asia - License code: USVGMRWY86NRJSA2
🙏All Red Beard Ops Socials - https://linktr.ee/redbeardops
Instagram: https://www.instagram.com/redbeardops/
✖️ | Twitter: https://twitter.com/RedBeardOps
Facebook: https://www.facebook.com/RedBeardOps
#redbeardops #ytsamuraichallenge #japanesesword
00:00 - Forging Traditional Damascus
01:58 - Forging Blade
03:13 - Cutting Template To Refine Profile
03:48 - Milling Shoulders
04:26 - Roughing Bevels
04:48 - Heat Treatment
06:11 - Straightening Warps
07:07 - Final Blade Grinding & Sanding
08:13 - Custom Habaki Bender
09:17 - Making Habaki
10:59 - Rough Fitting Spacers & Guard
12:33 - Fitting Handle Block & Threading Tang
15:01 - 3D Printing Guard Template
15:36 - Shaping Guard & Spacers
16:19 - Alignment Pins
17:24 - Handle Shaping
18:40 - Re-Profiling Guard
18:56 - Maker's Mark
19:22 - Etching Damascus
20:29 - Fittings Final Finishing
21:33 - Sharpening
22:24 - Assembly & Glue Up
23:38 - Finishing Rear
24:11 - ... It Was A Joke...
24:26 - AMA
24.54 - What I Don't Like
26:35 - What I DO Like
26:28 - Slicing A Water Jug
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
217
views
2
comments
Custom Cutting Foam Inlays | Consumer Grade XTOOL Diode Laser
In today's mini-project we'll be cutting foam with a 20W diode laser. The goal here is to have a custom foam cut out for a hard covered case to house custom knives or tools.
🔸RBO Site - https://redbeardops.square.site/
⭐ Items:
Hard Case - https://amzn.to/45VluU9
1'' Foam - https://amzn.to/3sAxhc5
3M Adhesive - https://amzn.to/3sAxhc5
xTool D1 20W Laser Kit - https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=RedBeardOps&utm_medium=4938&utm_source=influencer
xTool Air Assist - https://www.xtool.com/products/xtool-air-assist-set?ref=RedBeardOps&utm_medium=4938&utm_source=influencer
🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps
🛠 Notable Items and Tools:
Honeycomb Table (400x400mm) - https://amzn.to/3RmYaba
Amazon Link To XTOOL - https://amzn.to/3qsZbCG
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
Facebook: https://www.facebook.com/RedBeardOps
#redbeardops
#lasercutting
#laserengraving
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
68
views
Dumb Engineer Reviews & Configures a Synology DS423+ NAS
This Synology DS423+ Network Attached Storage System is a great option for the home user! The DSM operating system is great for the newbie, like myself and the SHR raid allows for flexibility as the system grows.
⭐ Mentioned Items:
DS423+ Synology NAS - https://amzn.to/3OpDWNt
8TB HGST Renewed Drives - https://amzn.to/46pgfgB
8TB Seagate IronWolf - https://amzn.to/3OsGACg
UPS Battery Backup - https://amzn.to/3qmktoV
00:00 - Unboxing / HHD Install
01:12 - Find Synology NAS
01:59 - Create Storage Pool
02:35 - Connect Shared Drive
03:48 - Plex
04:32 - Replace SHR Drive
05:37 - UPS Battery Backup
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
102
views
Unlocking the Mysteries of Canister Damascus: Worth the Journey? | Knife Making Techniques
Last time I made canister damascus was in 2007 and I can say beyond a shadow of a doubt this time was way smoother! Hope yall enjoy the journey here; links to the ball bearings I used are below; stay tuned for the knife that comes out of this billet!
⭐ Items:
1/4'' Ball Bearings - https://amzn.to/46wdXw1
1/8'' Ball Bearings - https://amzn.to/3NYVTDr
Welding Sleeves - https://amzn.to/3pC0Ysg
🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps
🗡 Knife Builds:
Twist Damascus Bowie - https://youtu.be/g19hDroWuDY
Fantasy Challenge Knife - https://youtu.be/N9VmPedKFvM
🔩 How To Videos:
Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY
Heat Treat Oven - https://youtu.be/7FalYyVASyw
Disc Grinder - https://youtu.be/680VFZ8Tm1g
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
Facebook: https://www.facebook.com/RedBeardOps
#redbeardops #knifemaking #forging
Music from Uppbeat (free for Creators!):
https://uppbeat.io/t/danger-lion-x/the-street-market
License code: ZXSJHMEC4OQ2IHCI
00:00 - Making Can
00:27 - Filling Can
01:31 - Making Squaring Dies
02:48 - Initial Forge Weld
03:27 - Removing Can
04:06 - Forging Billet
04:59 - Pattern Reveal
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
110
views
DIY FORGE Burner v2.0 | A Robust Forced Air Burner For Knife Making & Blacksmithing
Join me in my latest video where I completely rebuild my knife making forge's burner. This comprehensive guide will show you how I've upgraded the burner assembly's safety features and robustness. You'll learn all about the way forced air burners work, the components needed, and the introduction of a new power-outage-safe magnetic switch. I'll be sharing my trials and learnings as I experiment with different burner tube sizes for optimal flame control with trail and error testing. Let me know what yall think!
🔩 Items:
Safety Switch - https://amzn.to/3N9OQGt
Solenoid - https://amzn.to/2FqHdsX
1'' Fire Bricks - https://amzn.to/42KxlCg
Marshall Regulator - https://amzn.to/38UkPKN
Steel Braded Propane Hose - https://amzn.to/3z2sQYR
Propane Tank Adapter - https://amzn.to/3YF7077
30psi Gauge - https://amzn.to/3YleQmN
Potential Blower Option: https://amzn.to/3JjVf0S
🛠 Tools
Masonry Blade - https://amzn.to/3qLmHhF
Pipe Wrenches - https://amzn.to/3NvZpoO
🔧 Most Fittings if not all of them can be found here:
https://www.supplyhouse.com/
AND/OR here
http://hightemptools.com/propaneregulators.html
🔸 Blade Forums Thread - https://www.bladeforums.com/threads/best-motorized-ball-valve-solenoid-for-auto-propane-forge-shutoff.1931385/
🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
Facebook: https://www.facebook.com/RedBeardOps
00:00 - Intro / Motivation
00:52 - Disassembly
01:06 - Clean Up Blower Wiring
01:44 - Mounting Bracket
01:57 - Basic Burner Layout
04:00 - Assembly & Mounting
04:39 - Gas Control Assembly
07:04 - Safety Switch Install
10:02 - Explaining Gas Inlet
10:31 - Demonstrating Safety Switch
11:49 - Forge Maintenance
12:57 - Testing 1-1/4'' Burner Tube
13:30 - Testing 1'' Burner Tube
#redbeardops
#FORGE #knifemaking
**********************************************************
Music from #Uppbeat (free for Creators!):
https://uppbeat.io/t/pryces/music-is
License code: STPM7FOGE02TT2WV
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
121
views
Knife Sharpening Made EASY! // Wicked Edge Gen 3 Pro Review
In this video, I review the Wicked Edge Gen 3 Pro knife sharpener and compare it to two other sharpening systems. As a custom knife maker, I've used many different sharpeners, but the @WickedEdgePrecisionSharpeners Gen 3 Pro stood out as the clear winner. Its precision and consistency make it a great investment for anyone looking to sharpen their knives. In this video, I'll show you how the Wicked Edge performed and why it's become my go-to sharpener.
⭐ Buy Wicked Edge Direct - https://wickededgeusa.com/collections/sharpeners
⭐ Buy Wicked Edge on Amazon - https://amzn.to/40fYlbG
🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps
🔸 Knives For Sale - https://redbeardops.square.site/s/shop
🗡 Knife Builds:
Twist Damascus Bowie - https://youtu.be/g19hDroWuDY
Fantasy Challenge Knife - https://youtu.be/N9VmPedKFvM
Bitcoin Knife - https://youtu.be/_Ph_LYE6Gcc
⭐ How To Videos:
Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY
DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
Facebook: https://www.facebook.com/RedBeardOps
#redbeardops #knifesharpener #knifesharpening
00:00 - Intro / Outline
02:52 - Section 1: Initial Set Up / Testing
06:39 - Section 2: Wheel VS Wicked Edge
11:39 - Section 3: Belts VS Wicked Edge
15:15 - Section 4: Spyderco
16:49 - Section 5: Zero Edge To Sharp Custom
20:44 - Section 6: Final Thoughts (Pros/Cons)
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
120
views
1
comment
"That's TWISTED!" -- Low Layer Twist Damascus BOWIE - Full Knife Making Movie
This is the full length build of my recent narrated Low Twist Bowie series. If you're interested in the finer details check out the other 3, more detailed videos.
🔸 Knives For Sale - https://redbeardops.square.site/s/shop
🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps
🛠 Notable Items and Tools:
xTool D1 20W Laser Kit -https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=RedBeardOps&utm_medium=4938&utm_source=influencer
3M Versaflo Respirator - https://amzn.to/3HLbz89
Long Gooseneck Light - https://amzn.to/3fcEyYO
Oleg's Wood - https://knife-wood.com/
Microscope - https://amzn.to/3UbnfGH
Face Mill - https://amzn.to/3uSqeII
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
Facebook: https://www.facebook.com/RedBeardOps
#redbeardops #bowieknife #customknife
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
98
views
2
comments
RESTORATION - Reviving an Old G3 Bayonet Knife - Step by Step DIY Project
Unleash the DIY master in you with this epic knife restoration project! Follow me as I transform an old Eickhorn G3 Bayonet into a stunning custom knife. With stainless steel guard and fittings, and a rich bloodwood handle, this baby is guaranteed to turn heads. So grab a cup of coffee, sharpen your tools and get ready for some serious knife restoration fun! Subscribe now for more amazing custom knife making tutorials.
⭐ eBay Bayonet Auction - https://www.ebay.com/itm/334722869470
⭐ Other RBO Knives For Sale - https://redbeardops.square.site/s/shop
🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps
🔸 G3 Bayonet Blank - https://www.makermaterialsupply.com/products/copy-of-g3-bayonet-blade-blank-made-by-eickhorn-solingen-germany-1-blank-es5
🛠 Notable Items and Tools:
Hole Saw - https://amzn.to/3Dm0VnO
Face Mill - https://amzn.to/3uSqeII
3M Versaflo Respirator - https://amzn.to/3HLbz89
Mini Vise - https://amzn.to/3zJZjmc
Grobet 6'' File - https://amzn.to/3zLR0Hc
Buffer - https://amzn.to/3BPLbrF
xTool D1 20W Laser Kit -https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=RedBeardOps&utm_medium=4938&utm_source=influencer
File Guide - https://brian-bump-3hth.squarespace.com/fileguides/brucebump
Long Gooseneck Light - https://amzn.to/3fcEyYO
Collet Block - https://amzn.to/394HiT0
Collets (ER32) - https://amzn.to/3kQGzqI
LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
Facebook: https://www.facebook.com/RedBeardOps
#redbeardops #restoration #bayonet
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
104
views
Bitcoin Seed Stamping Jig - Steel Washer Method - Laser Engraver Plans FREE
Not your keys; not your Bitcoin. Back up your cold storage hardware wallet's seed phrase on stainless steel washers with this laser cut jig! After seeing the "Blockmit" 3D-printed version of this jig, I had to make one on my XTool laser engraver! Hope yall enjoyed the video!
⭐ Free Plans Here - https://www.patreon.com/posts/76676554
🔩 Items:
Washer Option 1 (8mm) - https://amzn.to/3YwiKtx
Washer Option 2 (8mm) - https://amzn.to/3PKFJNp
SS Bolt (2.5'') - https://amzn.to/3jgU9ZH
SS Bolt (1.25'') - https://amzn.to/3v42LWa
SS Nuts (5/16ths) - https://amzn.to/3hF0E83
🛠 Tools Used:
3mm Punch Set - https://amzn.to/3V5oRC1
Wood Glue - https://amzn.to/3jg0gNw
1/8'' drill bits - https://amzn.to/3FH0STV
xTool D1 20W Laser Kit - https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=RedBeardOps&utm_source=influencer&variant=43022796554479
🔸 Become a Patron - https://www.patreon.com/RedBeardOps
🔸 Twitter: https://twitter.com/RedBeardOps
#bitcoinwallet #bitcoin #hardwarewallet
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
59
views
FINISHED - My Best Attempt Making an Heirloom Damascus BOWIE! Part 3
Part 3 of my Low Layer Count Damascus Bowie Knife Build! Hope yall enjoy the series!
⭐ For Sale Here - https://redbeardops.square.site/s/shop
🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps
🛠 Notable Items and Tools:
Grobet 6'' File - https://amzn.to/3zLR0Hc
Oleg's Wood Blocks - https://knife-wood.com/
Paul Long Sheath DVD - https://amzn.to/3HgQAN3
Leather Splitter - https://amzn.to/3P9yluH
Buffer - https://amzn.to/3BPLbrF
xTool D1 20W Laser Kit -https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=RedBeardOps&utm_medium=4938&utm_source=influencer
⭐ How To Videos:
DIY Disc Grinder - https://youtu.be/680VFZ8Tm1g
Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY
DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
Facebook: https://www.facebook.com/RedBeardOps
#redbeardops #bowieknife #knifemaking
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
51
views
1
comment
My Best Attempt Making an Heirloom Damascus BOWIE! Part 1
Part 1 of my Low Layer Count Damascus Bowie Knife Build! Hope yall enjoy the series!
🔸 Red Beard Ops Website - https://redbeardops.square.site/
🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps
🛠 Notable Items and Tools:
xTool D1 20W Laser Kit -https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=RedBeardOps&utm_medium=4938&utm_source=influencer
Push Stick - https://www.mcmaster.com/catalog/128/4008
File Guide - https://brian-bump-3hth.squarespace.com/fileguides/brucebump
Long Gooseneck Light - https://amzn.to/3fcEyYO
LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard
3M Versaflo Respirator - https://amzn.to/3HLbz89
Sanding Stones - https://maritimeknifesupply.ca/products/falcon-sanding-stones-for-tr-maker-sharpening-system?_pos=2&_sid=a65695387&_ss=r
⭐ How To Videos:
DIY Disc Grinder - https://youtu.be/680VFZ8Tm1g
Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY
DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
Facebook: https://www.facebook.com/RedBeardOps
#redbeardops #bowieknife #knifemaking
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
81
views
3
comments
Watch This BEFORE You Buy A Buffer: Are They Useful?
⚠ The most dangerous tool in knife making... The buffer...⚠
⭐Buffer - https://amzn.to/3VuVidL
⭐320 Grit Wheel - https://amzn.to/3AOQc42
⭐240 Grit Wheel - https://amzn.to/3OFFvGT
⭐Buffing Compound - https://popsknife.supplies/products/maverick-buffing-compound?_pos=2&_sid=b1710be89&_ss=r
🔸Become a RBO Patron - https://www.patreon.com/RedBeardOps
🔸 Red Beard Ops Website - https://redbeardops.square.site/
📹How To Videos:
DIY Disc Grinder - https://youtu.be/680VFZ8Tm1g
Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY
DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
Facebook: https://www.facebook.com/RedBeardOps
#redbeardops #toolreview #toolrevews
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
70
views
2
comments
You Still Have Time! - Build Along Part 2
Part 2 of the build along knife!
Plans Here - https://www.patreon.com/posts/build-along-73780694
For Sale Here - https://redbeardops.square.site/s/shop
Build Along Judge's Playlist - https://youtube.com/playlist?list=PLQHsQ0FLxUF1zNaGXOFeW9wuWLEeLO0V4
Contest Prizes Over All Winner:
$200 Budget with Maritime Knife Supply
The Beginner Bladesmith Royer Course ($500 Value)
Beck's Armory Vander Sander DIY Kit
TR Maker 9'' Disc
Little Machine Shop Layout Kit (Scribes / Squares / etc)
DIY_Europe Curved 2x72 Platten
Maximus Knives Hot Stamping Harddie Jig
Kyle Daily - Curved Sanding Sticks
Some handle material from B. Kohn Knives
Contest Prizes Novice Winner:
$200 Budget with Maritime Knife Supply
The Beginner Bladesmith Royer Course ($500 Value)
Little Machine Shop Layout Kit (Scribes / Squares / etc)
Some handle material from B. Kohn Knives
Kyle Daily - Flat G10 Sanding Sticks
Contest Rules & Timeline:
An over all winner will be picked based on the "best" knife presented by the views as deemed by the judging channels. There will also be a "novice winner." The novice submissions must come from makers with less than one year experience and by makers without a 2x72 belt grinder (please include in your email why you should be judged in the novice category - we will take this on a case by case basis). The second build videos by the judges will be posted on the 18th of November and the pictures are due by the 27th of November. Winners will be announced on the 30th of November.
⭐Send Your Best Build Along Knife Picture HERE - knifebuildalong@gmail.com
NOTE: The build-along winners must be in the USA or Canada (for shipping purposes) however, we still encourage anyone to participate. Please let us know which Country you are in when you submit your final photo.
📹The Judge's Channels:
@Wengels Workshop
@B. Kohn Knives
@KyleRoyerKnives
⭐Build Along Challenge Sponsors:
Beck's Armory - https://becksarmory.com/
TR Maker - https://www.tr-maker.com/
Maritime Supply - https://maritimeknifesupply.ca/
Little Machine Shop - https://littlemachineshop.com/
Learn Knife Making (Royers) - https://www.learnknifemaking.com/
DIY Europe - https://www.instagram.com/diy_europe/
Kyle Daily - https://www.instagram.com/khdailyknives/
Maximus Knives - https://www.instagram.com/maximusknives/
🛠Notable Items and Tools:
Japan Select Basket Stamp - https://amzn.to/2NDRg5q
Buffer - https://amzn.to/3BPLbrF
LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard
Long Gooseneck Light - https://amzn.to/3fcEyYO
Wheeler Torque Wrench - https://amzn.to/3STpQ7t
xTool D1 20W Laser Kit - https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=RedBeardOps&utm_source=influencer&variant=43022796554479
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
Facebook: https://www.facebook.com/RedBeardOps
#knifebuildalong
#knifemaking
#redbeardops
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
85
views
1
comment
Want To SEE What You're DOING?!?! - Engraving - Inlay Microscope Review
Not Bad!!
⭐Buy This Microscope Direct - https://bit.ly/3seUjSA - (5% off discount code VVSALE5)
⭐Buy On Amazon - https://amzn.to/3UbnfGH
🛠 Other Notable Items and Tools:
Mini Vise - https://amzn.to/3zJZjmc
Brass Jaws - https://amzn.to/3zKPnJf
Digital Camera/Microscope - https://amzn.to/3oyT2nb
Rotary Tool - https://amzn.to/3PwpFxH
Rotary Collets - https://amzn.to/3J55dlf
Carbide Bur (round 1/4) - https://lascodiamond.com/LascoDental-FG-Carbide.html
🔸Become a RBO Patron - https://www.patreon.com/RedBeardOps
📹How To Videos:
DIY Disc Grinder - https://youtu.be/680VFZ8Tm1g
Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY
DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
Facebook: https://www.facebook.com/RedBeardOps
#redbeardops
#toolreview
#microscope
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
24
views
1
comment
BUILD ALONG & Viewer Competition - LETS GO - Part 1
Lets make a knife together!
Plans Here - https://www.patreon.com/posts/build-along-73780694
Build Along Judge's Playlist - https://youtube.com/playlist?list=PLQHsQ0FLxUF1zNaGXOFeW9wuWLEeLO0V4
Contest Prizes Over All Winner:
$200 Budget with Maritime Knife Supply
The Beginner Bladesmith Royer Course ($500 Value)
Beck's Armory Vander Sander DIY Kit
TR Maker 9'' Disc
Little Machine Shop Layout Kit (Scribes / Squares / etc)
DIY_Europe Curved 2x72 Platten
Some handle material from B. Kohn Knives
Contest Prizes Novice Winner:
$200 Budget with Maritime Knife Supply
The Beginner Bladesmith Royer Course ($500 Value)
Little Machine Shop Layout Kit (Scribes / Squares / etc)
Some handle material from B. Kohn Knives
Contest Rules & Timeline:
An over all winner will be picked based on the "best" knife presented by the views as deemed by the judging channels. There will also be a "novice winner." The novice submissions must come from makers with less than one year experience and by makers without a 2x72 belt grinder (please include in your email why you should be judged in the novice category - we will take this on a case by case basis). The second build videos by the judges will be posted on the 18th of November and the pictures are due by the 27th of November. Winners will be announced on the 30th of November.
⭐Send Your Best Build Along Knife Picture HERE - knifebuildalong@gmail.com
NOTE: The build-along winners must be in the USA only (for shipping purposes) however, we still encourage anyone to participate. Please let us know which Country you are in when you submit your final photo.
📹The Judge's Channels:
@Wengels Workshop
@B. Kohn Knives
@KyleRoyerKnives
⭐Build Along Challenge Sponsors:
Beck's Armory - https://becksarmory.com/
TR Maker - https://www.tr-maker.com/
Maritime Supply - https://maritimeknifesupply.ca/
Little Machine Shop - https://littlemachineshop.com/
Learn Knife Making (Royers) - https://www.learnknifemaking.com/
DIY Europe - https://www.instagram.com/diy_europe/
🛠Notable Items and Tools:
Checkering File - https://amzn.to/3bg2iER
Cheapo Microscope - https://amzn.to/3oyT2nb
LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard
3M Versaflo Respirator - https://amzn.to/3HLbz89
🔸Become a RBO Patron - https://www.patreon.com/RedBeardOps
⭐How To Videos:
DIY Disc Grinder - https://youtu.be/680VFZ8Tm1g
Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY
DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
Facebook: https://www.facebook.com/RedBeardOps
#knifebuildalong
#knifemaking
#redbeardops
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
97
views
1
comment
"This is Madness!" -- FANTASY Knife Challenge
I had a blast making this knife! Make sure to vote for your favorite knife here -
💵 Purchase This Knife Here - https://redbeardops.square.site/
🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps
⭐ Fantasy Challenge Sponsors:
Maritime Knife Supply: https://maritimeknifesupply.ca/
Hi.Koa: https://www.instagram.com/hi.koa/
Mosa US: https://mosaus.com/
🛠 Notable Items and Tools:
Buffer - https://amzn.to/3BPLbrF
Checkering File - https://amzn.to/3bg2iER
Rotary Tool - https://amzn.to/3PwpFxH
Rotary Collets - https://amzn.to/3J55dlf
Carbide Bur (round 1/4) - https://lascodiamond.com/LascoDental-FG-Carbide.html
Microscope - https://amzn.to/3oyT2nb
LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard
3M Versaflo Respirator - https://amzn.to/3HLbz89
Elgin Earbuds - https://amzn.to/3go81MX
⭐ How To Videos:
DIY Disc Grinder - https://youtu.be/680VFZ8Tm1g
Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY
DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
Facebook: https://www.facebook.com/RedBeardOps
#redbeardops
#thefantasychallenge
#knifemaking
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
30
views
1
comment
How To Make A Display Stand - Fusion 360 to Lightburn - XTool D1 Pro 20W Diode Laser
A knife like this one needs a proper stand!
⭐File Downloads - https://www.etsy.com/shop/RedBeardMakes
⭐xTool D1 20W Laser Kit - https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=RedBeardOps&utm_source=influencer&variant=43022796554479
⭐ xTool Air Assist - https://www.xtool.com/products/air-assist-set?ref=RedBeardOps&utm_source=influencer
🛠 Notable Items and Tools:
12x12x1/4 Wood - https://amzn.to/3y5VSFE
Honeycomb Table (400x400mm) - https://amzn.to/3RmYaba
Amazon Link To XTOOL - https://amzn.to/3qsZbCG
#xtool #lasercuttingmachine #laserengraving
00:00 - Fusion 360
03:43 - Fusion 360 to Lightburn
09:05 - Finding Right Settings
11:54 - Cutting Out Stand
14:46 - Results
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
70
views
1
comment
Lucky #7 Bowie - An American Classic
Well yall, here is the full build! Enjoy!
🛠 Notable Items and Tools:
Long Gooseneck Light - https://amzn.to/3fcEyYO
LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard
Diomedes Sheaths - http://diomedesindustries.com/
Rotary Tool - https://amzn.to/3PwpFxH
Rotary Collets - https://amzn.to/3J55dlf
Microscope - https://amzn.to/3oyT2nb
Carbide Bur (round 1/4) - https://lascodiamond.com/LascoDental-FG-Carbide.html
Angle Finder - https://amzn.to/3N5ufkP
Endmill (Long) - https://amzn.to/3OsNPZl
Face Mill - https://amzn.to/3uSqeII
🔸 Red Beard Ops Website - https://redbeardops.square.site/
🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps
⭐ Full Narrated Episodes Of This Build:
Part 1 - https://youtu.be/52NsShM08LU
Part 2 - https://youtu.be/a-l1g_ujZR4
Part 3 - https://youtu.be/1a1LALrwNzQ
Part 4 - https://youtu.be/x92h0rasaE8
⭐ How To Videos:
DIY Disc Grinder - https://youtu.be/680VFZ8Tm1g
Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY
DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw
**************************************************
Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1
**************************************************
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
#redbeardops
#knifemaking
#americanmade
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
35
views
1
comment