Mini-Truck (SE08 EP6) Mini takes the Kayaks to Swamp river, otter comes close. Lots of turtles.
Swamp river is almost 20 miles long, starts in Pawling and ends in Dover Plains, NY. Never knew and I grew up in this area! Paddle along with us as we venture under low bridges and log jams on this slow moving river.
Amazon and eBay Affiliate Links:
Insta360 One X2 360 camera: https://amzn.to/3AQhs0T
Azdome dashcam 3 cam mirror monitor: https://amzn.to/33CNNfe
Precision machined Diverter, bypass, blowoff Valve: https://amzn.to/3EpMNZd
Brass Hose Fitting, Connector, 1" Barb x 1" Male Pipe: https://amzn.to/3xSbXNE
1" Carbon Steel NPT Pipe Tap and 1-5/32" High Speed Steel Drill Bit Set: https://amzn.to/31wFLmT
Glowshift Dual temp Supercharge Turbo gauge: https://amzn.to/3l2JY8T
GlowShift Tinted 7 Color 15 PSI Turbo Boost / Vacuum Gauge Kit: https://amzn.to/3FoZTWV
GlowShift wideband Air Fuel Ratio kit with data logger: https://amzn.to/3wJ9Ueg
Glowshift Hijet compatible tachometer:
AMR300 supercharger: https://amzn.to/3Ds9QCe
Aftermarket eBay 32mm performance carb: https://amzn.to/3CSO0HR
Video, Audio products used:
Azdome dashcam 3 cam
Ordo EP7 4k headgear camcorder https://amzn.to/3uK8ijo
Samsung S23 U5G Smartphone
Hijet Climber Mini-truck, this one is a 1992, 7th Gen, S83P, 660cc Minitruck. The “climber” means it has rear axle lock.
S83p specs:
660cc 6 valve 3 cyl engine 48-53hp carburated (about 80hp with supercharger now)
weight: 1500 lbs (dry)
length 10'8" (128"). width 4'6" (54") w/o mirrors. Height 5'10" (70")
Load capacity 800 lbs
Max Speed 55-60mph (before supercharger)
Valve lash cold: intake 0.18mm exhaust 0.25mm
I may be compensated by some of the links, Thank you for your support
▽ Follow MotoCheez on....
Instagram: https://www.instagram.com/motocheez
Facebook: https://www.facebook.com/MotoCheez
Web: http://www.MotoCheez.com
Custom intro music and Voice intros by Harp C Chord, Ryan Harper.
Memes etc:
Music:
Movies:
#minitruck #supercharged #kei truck #swampriver #otters #kayaking
55
views
2
comments
Mini-Truck (SE08 EP3) Minitruck meets up with a long lost cousin from Japan, M-Team vans sister!
Mini starts right up with that primer button now! Running great too! John has a nice Daihatsu Atrai XX trubo van too! Cool guy.
He is going to do a camping setup so he will be going camping with us this summer.
Amazon and eBay Affiliate Links:
Insta360 One X2 360 camera: https://amzn.to/3AQhs0T
Azdome dashcam 3 cam mirror monitor: https://amzn.to/33CNNfe
Precision machined Diverter, bypass, blowoff Valve: https://amzn.to/3EpMNZd
Brass Hose Fitting, Connector, 1" Barb x 1" Male Pipe: https://amzn.to/3xSbXNE
1" Carbon Steel NPT Pipe Tap and 1-5/32" High Speed Steel Drill Bit Set: https://amzn.to/31wFLmT
Glowshift Dual temp Supercharge Turbo gauge: https://amzn.to/3l2JY8T
GlowShift Tinted 7 Color 15 PSI Turbo Boost / Vacuum Gauge Kit: https://amzn.to/3FoZTWV
GlowShift wideband Air Fuel Ratio kit with data logger: https://amzn.to/3wJ9Ueg
Glowshift Hijet compatible tachometer:
AMR300 supercharger: https://amzn.to/3Ds9QCe
Aftermarket eBay 32mm performance carb: https://amzn.to/3CSO0HR
Video, Audio products used:
Azdome dashcam 3 cam
Ordo EP7 4k headgear camcorder https://amzn.to/3uK8ijo
Samsung S23 U5G Smartphone
Hijet Climber Mini-truck, this one is a 1992, 7th Gen, S83P, 660cc Minitruck. The “climber” means it has rear axle lock.
S83p specs:
660cc 6 valve 3 cyl engine 48-53hp carburated (about 80hp with supercharger now)
weight: 1500 lbs (dry)
length 10'8" (128"). width 4'6" (54") w/o mirrors. Height 5'10" (70")
Load capacity 800 lbs
Max Speed 55-60mph (before supercharger)
Valve lash cold: intake 0.18mm exhaust 0.25mm
▽ Follow MotoCheez on....
Instagram: https://www.instagram.com/motocheez
Facebook: https://www.facebook.com/MotoCheez
Web: http://www.MotoCheez.com
Custom intro music and Voice intros by Harp C Chord, Ryan Harper.
50
views
2
comments
Mini-Truck (SE06 E12) BELT ISSUE FINALLY SOLVED? Has mini lost her appetite for eating belts?
Do you really need a Diverter valve installed? It seems so! now to put some miles on MINI. Over 120 miles on the lawnmower style belt and it still has not stretched to the limit
Places:
Cheezy's garage
Watch MotoCheez on Rumble now! https://rumble.com/register/MotoCheez/
Subscribe on YouTube: http://www.youtube.com/motocheez?sub_confirmation=1
Amazon and eBay Affiliate Links:
Precision machined Diverter, bypass, blowoff Valve: https://amzn.to/3EpMNZd
Brass Hose Fitting, Connector, 1" Barb x 1" Male Pipe: https://amzn.to/3xSbXNE
1" Carbon Steel NPT Pipe Tap and 1-5/32" High Speed Steel Drill Bit Set: https://amzn.to/31wFLmT
Glowshift Dual temp Supercharge Turbo gauge: https://amzn.to/3l2JY8T
GlowShift Tinted 7 Color 15 PSI Turbo Boost / Vacuum Gauge Kit: https://amzn.to/3FoZTWV
GlowShift wideband Air Fuel Ratio kit with data logger: https://amzn.to/3wJ9Ueg
Glowshift Hijet compatible tachometer:
AMR300 supercharger: https://amzn.to/3Ds9QCe
Aftermarket eBay 32mm performance carb: https://amzn.to/3CSO0HR
Video Audio products used:
Ordo EP7 4k headgear camcorfer https://amzn.to/3uK8ijo
GoVision Royale video glasses https://amzn.to/303yhaY
DJI Mavic Pro Drone: https://amzn.to/3amDZGd
DJI 8331 low noise propellors: https://amzn.to/3DkCdSk
Get your keyfob, Merch and more at www.motocheez.com
MiniTruck youtube playlist: https://goo.gl/EztFd8
Part links for the minitrucks: https://www.motocheez.com/hijet-mini-truck https://www.motocheez.com/suzuki-carry-dd51
Get your keyfob, Merch at: www.motocheez.com/merchandise
Hijet Climber Mini-truck, this one is a 1992, 7th Gen, S83P, 660cc Minitruck. The “climber” means it has rear axle lock.
S83p specs:
660cc 6 valve 3 cyl engine 48-53hp carburated
weight: 1500 lbs (dry)
length 10'8" (128"). width 4'6" (54") w/o mirrors. Height 5'10" (70")
Load capacity 800 lbs
Max Speed 55-60mph (before supercharger)
Valve lash cold: intake 0.18mm exhaust 0.25mm
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez on....
Instagram: https://www.instagram.com/motocheez
Facebook: https://www.facebook.com/MotoCheez
Web: http://www.MotoCheez.com
Custom intro music and Voiceovers by Harp C Chord, Ryan Harper.
41
views
2
comments
Mini-Truck (SE06 E11) AMR300 Another BELT? Blowoff / bypass valve installation
Another belt seems to be failing, but the Gates green strip did not stretch!, lot a cog and a few cracks by the other cogs, HAS to be the bypass valve, blowoff valve. So Yeah, I finally installed that today! Then off to Home Depot and Levines again.
Places:
Cheezy's garage
Watch MotoCheez on Rumble now! https://rumble.com/register/MotoCheez/
Subscribe on YouTube: http://www.youtube.com/motocheez?sub_confirmation=1
Amazon and eBay Affiliate Links:
Precision machined Diverter, bypass, blowoff Valve: https://amzn.to/3EpMNZd
Brass Hose Fitting, Connector, 1" Barb x 1" Male Pipe: https://amzn.to/3xSbXNE
1" Carbon Steel NPT Pipe Tap and 1-5/32" High Speed Steel Drill Bit Set: https://amzn.to/31wFLmT
Glowshift Dual temp Supercharge Turbo gauge: https://amzn.to/3l2JY8T
GlowShift Tinted 7 Color 15 PSI Turbo Boost / Vacuum Gauge Kit: https://amzn.to/3FoZTWV
GlowShift wideband Air Fuel Ratio kit with data logger: https://amzn.to/3wJ9Ueg
Glowshift Hijet compatible tachometer:
AMR300 supercharger: https://amzn.to/3Ds9QCe
Aftermarket eBay 32mm performance carb: https://amzn.to/3CSO0HR
Video Audio products used:
Ordo EP7 4k headgear camcorfer https://amzn.to/3uK8ijo
GoVision Royale video glasses https://amzn.to/303yhaY
DJI Mavic Pro Drone: https://amzn.to/3amDZGd
DJI 8331 low noise propellors: https://amzn.to/3DkCdSk
Get your keyfob, Merch and more at www.motocheez.com
MiniTruck youtube playlist: https://goo.gl/EztFd8
Part links for the minitrucks: https://www.motocheez.com/hijet-mini-truck https://www.motocheez.com/suzuki-carry-dd51
Get your keyfob, Merch at: www.motocheez.com/merchandise
Hijet Climber Mini-truck, this one is a 1992, 7th Gen, S83P, 660cc Minitruck. The “climber” means it has rear axle lock.
S83p specs:
660cc 6 valve 3 cyl engine 48-53hp carburated
weight: 1500 lbs (dry)
length 10'8" (128"). width 4'6" (54") w/o mirrors. Height 5'10" (70")
Load capacity 800 lbs
Max Speed 55-60mph (before supercharger)
Valve lash cold: intake 0.18mm exhaust 0.25mm
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez on....
Instagram: https://www.instagram.com/motocheez
Facebook: https://www.facebook.com/MotoCheez
Web: http://www.MotoCheez.com
Custom intro music and Voiceovers by Harp C Chord, Ryan Harper.
Memes etc:
Music:
Movies: The office, Trailer Park Boys, Happy Gilmore
44
views
Mini-Truck (SE06 E10) AMR300 Lawnmower belts and no bypass valve causing my problem?
Testing the new single belt with spring tensioner with 5” crank pulley with the AMR300 supercharger, drove around about 60 miles and the belt is stretched to the point the tensioner will not tension any more, was it the lawnmower belts the whole time? We will see, just got a Gates Green stripe belt from Levines automotive, an automotive belt to try out! WHY ARE THE BELTS STRETCHING!? Closing the supercharger inlet with bypass valve I bet!
Places:
Cheezy's garage
Watch MotoCheez on Rumble now! https://rumble.com/register/MotoCheez/
Subscribe on YouTube: http://www.youtube.com/motocheez?sub_confirmation=1
Amazon and eBay Affiliate Links:
Glowshift Dual temp Supercharge Turbo gauge: https://amzn.to/3l2JY8T
GlowShift Tinted 7 Color 15 PSI Turbo Boost / Vacuum Gauge Kit: https://amzn.to/3FoZTWV
GlowShift wideband Air Fuel Ratio kit with data logger: https://amzn.to/3wJ9Ueg
Glowshift Hijet compatible tachometer:
AMR300 supercharger: https://amzn.to/3Ds9QCe
Aftermarket eBay 32mm performance carb: https://amzn.to/3CSO0HR
Video Audio products used:
Ordo EP7 4k headgear camcorfer https://amzn.to/3uK8ijo
GoVision Royale video glasses https://amzn.to/303yhaY
DJI Mavic Pro Drone: https://amzn.to/3amDZGd
DJI 8331 low noise propellors: https://amzn.to/3DkCdSk
Get your keyfob, Merch and more at www.motocheez.com
MiniTruck youtube playlist: https://goo.gl/EztFd8
Part links for the minitrucks: https://www.motocheez.com/hijet-mini-truck https://www.motocheez.com/suzuki-carry-dd51
Get your keyfob, Merch at: www.motocheez.com/merchandise
Hijet Climber Mini-truck, this one is a 1992, 7th Gen, S83P, 660cc Minitruck. The “climber” means it has rear axle lock.
S83p specs:
660cc 6 valve 3 cyl engine 48-53hp carburated
weight: 1500 lbs (dry)
length 10'8" (128"). width 4'6" (54") w/o mirrors. Height 5'10" (70")
Load capacity 800 lbs
Max Speed 55-60mph (before supercharger)
Valve lash cold: intake 0.18mm exhaust 0.25mm
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez on....
Instagram: https://www.instagram.com/motocheez
Facebook: https://www.facebook.com/MotoCheez
Web: http://www.MotoCheez.com
Custom intro music and Voiceovers by Harp C Chord, Ryan Harper.
Memes etc:
Music:
Movies: The office
14
views
Mini-Truck (SE06 E09) AMR300 Supercharger crank pulley and tensioner install. Road tests.
So I did a recap of the work done to install the AMR300 supercharger, fabricating, redoing, tinkering and I think its all coming together pretty good! Installed the 5” crank pulley from tractor supply. 2.265, 4 bolt hole circle, 21/64th holes. Then ran some tests with older single belt and 6”, then moved the supercharger forward and made the brackets for spring loaded belt tensioner and a 26"x1/2" belts, its all on and working. Have a small leak at the flange under heavy boost... grr. And how you like that garage door spring breaking and knocking Ernest off the wall?
Places:
Cheezy's garage
Watch MotoCheez on Rumble now! https://rumble.com/register/MotoCheez/
Subscribe on YouTube: http://www.youtube.com/motocheez?sub_confirmation=1
Amazon and eBay Affiliate Links:
Glowshift Dual temp Supercharge Turbo gauge: https://amzn.to/3l2JY8T
GlowShift Tinted 7 Color 15 PSI Turbo Boost / Vacuum Gauge Kit: https://amzn.to/3FoZTWV
GlowShift wideband Air Fuel Ratio kit with data logger: https://amzn.to/3wJ9Ueg
Glowshift Hijet compatible tachometer:
AMR300 supercharger: https://amzn.to/3Ds9QCe
Aftermarket eBay 32mm performance carb: https://amzn.to/3CSO0HR
Video Audio products used:
Ordo EP7 4k headgear camcorfer https://amzn.to/3uK8ijo
GoVision Royale video glasses https://amzn.to/303yhaY
DJI Mavic Pro Drone: https://amzn.to/3amDZGd
DJI 8331 low noise propellors: https://amzn.to/3DkCdSk
Get your keyfob, Merch and more at www.motocheez.com
MiniTruck youtube playlist: https://goo.gl/EztFd8
Part links for the minitrucks: https://www.motocheez.com/hijet-mini-truck https://www.motocheez.com/suzuki-carry-dd51
Get your keyfob, Merch at: www.motocheez.com/merchandise
Hijet Climber Mini-truck, this one is a 1992, 7th Gen, S83P, 660cc Minitruck. The “climber” means it has rear axle lock.
S83p specs:
660cc 6 valve 3 cyl engine 48-53hp carburated
weight: 1500 lbs (dry)
length 10'8" (128"). width 4'6" (54") w/o mirrors. Height 5'10" (70")
Load capacity 800 lbs
Max Speed 55-60mph (before supercharger)
Valve lash cold: intake 0.18mm exhaust 0.25mm
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez on....
Instagram: https://www.instagram.com/motocheez
Facebook: https://www.facebook.com/MotoCheez
Web: http://www.MotoCheez.com
Custom intro music and Voiceovers by Harp C Chord, Ryan Harper.
Memes etc:
Music:
Movies: Borat
45
views
Mini-Truck (SE06 E06) Stock Hijet VS SUPERCHARGED race. Will the 5 speed fit? And some lunch
Just putting some miles on mini with the supercharger. Bill Jr bought a minitruck so he drove it over. I checked to see if the 5 speed will fit, NOPE. Then we do a little race to compare the stock Hijet to a boosted Hijet, Mini is WAY faster!! Then stopped up to Freshco for some lunch and back home.
Places:
Cheezy's garage
Watch MotoCheez on Rumble now! https://rumble.com/register/MotoCheez/
Subscribe on YouTube: http://www.youtube.com/motocheez?sub_confirmation=1
Amazon and eBay Affiliate Links:
GlowShift Tinted 7 Color 15 PSI Turbo Boost / Vacuum Gauge Kit: https://amzn.to/3FoZTWV
GlowShift wideband Air Fuel Ratio kit with data logger: https://amzn.to/3wJ9Ueg
Glowshift Hijet compatible tachometer:
AMR300 supercharger: https://amzn.to/3Ds9QCe
Aftermarket eBay 32mm performance carb: https://amzn.to/3CSO0HR
Video Audio products used:
Ordo EP7 4k headgear camcorfer https://amzn.to/3uK8ijo
GoVision Royale video glasses https://amzn.to/303yhaY
DJI Mavic Pro Drone: https://amzn.to/3amDZGd
DJI 8331 low noise propellors: https://amzn.to/3DkCdSk
Get your keyfob, Merch and more at www.motocheez.com
MiniTruck youtube playlist: https://goo.gl/EztFd8
Part links for the minitrucks: https://www.motocheez.com/hijet-mini-truck https://www.motocheez.com/suzuki-carry-dd51
Get your keyfob, Merch at: www.motocheez.com/merchandise
Hijet Climber Mini-truck, this one is a 1992, 7th Gen, S83P, 660cc Minitruck. The “climber” means it has rear axle lock.
S83p specs:
660cc 6 valve 3 cyl engine 48-53hp carburated
weight: 1500 lbs (dry)
length 10'8" (128"). width 4'6" (54") w/o mirrors. Height 5'10" (70")
Load capacity 800 lbs
Max Speed 55-60mph (before supercharger)
Valve lash cold: intake 0.18mm exhaust 0.25mm
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez on....
Instagram: https://www.instagram.com/motocheez
Facebook: https://www.facebook.com/MotoCheez
Web: http://www.MotoCheez.com
Custom intro music and Voiceovers by Harp C Chord, Ryan Harper.
25
views
Mini-Truck (SE06 E01) MINI GOT BOOST! AMR300 SUPERCHARGER fabricate, install and test
After 2 years of waiting, I finally installed the AMR300 supercharger (I paid $168, they over $300 now), 2 days of gathering parts making brackets, welding flanges and finding right size belt. It's on and running! Taking it easy until I get the AFR gauge
Places:
Cheezy's garage
Amazon and eBay Affiliate Links:
AMR300 supercharger: https://amzn.to/3Ds9QCe
GoVision Royale video glasses https://amzn.to/303yhaY
Aftermarket eBay 32mm performance carb: https://amzn.to/3CSO0HR
Tarp clips, holders: https://amzn.to/3uYrw54
Lego Technic Jeep Wrangler Rubicon: https://amzn.to/3v0n5qs
Tarp bungee balls: https://amzn.to/3v4Hb2L
DJI Mavic Pro Drone: https://amzn.to/3amDZGd
DJI 8331 low noise propellors: https://amzn.to/3DkCdSk
Ordo EP7 4k headgear camcorfer https://amzn.to/3uK8ijo
Milwaukee M18 chainsaw: https://amzn.to/2CjFwvd
Bauer battery conversion: https://amzn.to/3a0UgBo
Bauer and Lynx saw available at Harbor freight!
Get your keyfob, Merch and more at www.motocheez.com
MiniTruck youtube playlist: https://goo.gl/EztFd8
Part links for the minitrucks: https://www.motocheez.com/hijet-mini-truck https://www.motocheez.com/suzuki-carry-dd51
Get your keyfob, Merch at: www.motocheez.com/merchandise
Nevele exploration video: https://youtu.be/VSOhLEz8x-g
Amir has about 60 MiniTrucks in stock, he was very helpful at Boeki USA, www.boekiusa.com has their updated inventory. Ask for Amir and tell them MOTOCHEEZ sent you! (SAVE $100) East coast 212-729-8293 West coast 360-990-7770. I suggest buying your minitruck here
Hijet Climber Mini-truck, this one is a 1992, 7th Gen, S83P, 660cc Minitruck. The “climber” means it has rear axle lock.
S83p specs:
660cc 6 valve 3 cyl engine 48-53hp carburated
weight: 1500 lbs (dry)
length 10'8" (128"). width 4'6" (54") w/o mirrors. Height 5'10" (70")
Load capacity 800 lbs
Max Speed 55-60mph
Valve lash cold: intake 0.18mm exhaust 0.25mm
I know there may be other videos of this.. but this is my Cheezy style!
Due to changing products, links, etc, If you want the most recent product links (if these are no good), go to www.motocheez.com and click the section you're looking for (upper right) and scroll down the page for the item.
This keeps the links for all the parts more accurate. These I use and install on ALL my videos. I do not sell any of the items listed. (except T-shirts and key tags.. HURRY UP AND BUY!)
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez on....
Instagram: https://www.instagram.com/motocheez
Facebook: https://www.facebook.com/MotoCheez
Web: http://www.MotoCheez.com
Custom intro music and Voiceovers by Harp C Chord, Ryan Harper.
35
views
Mini-Truck (SE06 E07) GlowShift dual temp install, Mini eating up belts. ARM300 seizing?
Installed the GlowShift Dual temp gauge, messed with some jetting on the carb, too lean. Blew a brand new belt, then another belt in same locationas first belt, that THREE belts in the same location!
Is the supercarger seizing up because of the metal spurs I found, tightening too much or is the crankcase oil vapored air lubing it? I took the spurs out and cleaned up the rotors with 1200 grit sandpaper. Will install and try again with crank vent installed. Have to get some more belts of course! A TON MORE.
Places:
Cheezy's garage
Watch MotoCheez on Rumble now! https://rumble.com/register/MotoCheez/
Subscribe on YouTube: http://www.youtube.com/motocheez?sub_confirmation=1
Amazon and eBay Affiliate Links:
Glowshift Dual temp Supercharge Turbo gauge: https://amzn.to/3l2JY8T
GlowShift Tinted 7 Color 15 PSI Turbo Boost / Vacuum Gauge Kit: https://amzn.to/3FoZTWV
GlowShift wideband Air Fuel Ratio kit with data logger: https://amzn.to/3wJ9Ueg
Glowshift Hijet compatible tachometer:
AMR300 supercharger: https://amzn.to/3Ds9QCe
Aftermarket eBay 32mm performance carb: https://amzn.to/3CSO0HR
Video Audio products used:
Ordo EP7 4k headgear camcorfer https://amzn.to/3uK8ijo
GoVision Royale video glasses https://amzn.to/303yhaY
DJI Mavic Pro Drone: https://amzn.to/3amDZGd
DJI 8331 low noise propellors: https://amzn.to/3DkCdSk
Get your keyfob, Merch and more at www.motocheez.com
MiniTruck youtube playlist: https://goo.gl/EztFd8
Part links for the minitrucks: https://www.motocheez.com/hijet-mini-truck https://www.motocheez.com/suzuki-carry-dd51
Get your keyfob, Merch at: www.motocheez.com/merchandise
Hijet Climber Mini-truck, this one is a 1992, 7th Gen, S83P, 660cc Minitruck. The “climber” means it has rear axle lock.
S83p specs:
660cc 6 valve 3 cyl engine 48-53hp carburated
weight: 1500 lbs (dry)
length 10'8" (128"). width 4'6" (54") w/o mirrors. Height 5'10" (70")
Load capacity 800 lbs
Max Speed 55-60mph (before supercharger)
Valve lash cold: intake 0.18mm exhaust 0.25mm
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez on....
Instagram: https://www.instagram.com/motocheez
Facebook: https://www.facebook.com/MotoCheez
Web: http://www.MotoCheez.com
Custom intro music and Voiceovers by Harp C Chord, Ryan Harper.
20
views
Mini-Truck (SE06 E02) 9 LBS boost! Supercharger Mishaps, GlowShift AFR gauge installation
A few setbacks with the supercharger, pipes, belts, dipstick, but all worked out and I did the GlowShift AFR gauge install to find I have 9 psi boost and it is too LEAN!
Places:
Cheezy's garage
Amazon and eBay Affiliate Links:
GlowShift wideband Air Fuel Ratio kit with data logger: https://amzn.to/3wJ9Ueg
AMR300 supercharger: https://amzn.to/3Ds9QCe
GoVision Royale video glasses https://amzn.to/303yhaY
Aftermarket eBay 32mm performance carb: https://amzn.to/3CSO0HR
Tarp clips, holders: https://amzn.to/3uYrw54
Lego Technic Jeep Wrangler Rubicon: https://amzn.to/3v0n5qs
Tarp bungee balls: https://amzn.to/3v4Hb2L
DJI Mavic Pro Drone: https://amzn.to/3amDZGd
DJI 8331 low noise propellors: https://amzn.to/3DkCdSk
Ordo EP7 4k headgear camcorfer https://amzn.to/3uK8ijo
Milwaukee M18 chainsaw: https://amzn.to/2CjFwvd
Bauer battery conversion: https://amzn.to/3a0UgBo
Bauer and Lynx saw available at Harbor freight!
Get your keyfob, Merch and more at www.motocheez.com
MiniTruck youtube playlist: https://goo.gl/EztFd8
Part links for the minitrucks: https://www.motocheez.com/hijet-mini-truck https://www.motocheez.com/suzuki-carry-dd51
Get your keyfob, Merch at: www.motocheez.com/merchandise
Nevele exploration video: https://youtu.be/VSOhLEz8x-g
Amir has about 60 MiniTrucks in stock, he was very helpful at Boeki USA, www.boekiusa.com has their updated inventory. Ask for Amir and tell them MOTOCHEEZ sent you! (SAVE $100) East coast 212-729-8293 West coast 360-990-7770. I suggest buying your minitruck here
Hijet Climber Mini-truck, this one is a 1992, 7th Gen, S83P, 660cc Minitruck. The “climber” means it has rear axle lock.
S83p specs:
660cc 6 valve 3 cyl engine 48-53hp carburated
weight: 1500 lbs (dry)
length 10'8" (128"). width 4'6" (54") w/o mirrors. Height 5'10" (70")
Load capacity 800 lbs
Max Speed 55-60mph
Valve lash cold: intake 0.18mm exhaust 0.25mm
I know there may be other videos of this.. but this is my Cheezy style!
Due to changing products, links, etc, If you want the most recent product links (if these are no good), go to www.motocheez.com and click the section you're looking for (upper right) and scroll down the page for the item.
This keeps the links for all the parts more accurate. These I use and install on ALL my videos. I do not sell any of the items listed. (except T-shirts and key tags.. HURRY UP AND BUY!)
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez on....
Instagram: https://www.instagram.com/motocheez
Facebook: https://www.facebook.com/MotoCheez
Web: http://www.MotoCheez.com
Custom intro music and Voiceovers by Harp C Chord, Ryan Harper.
44
views
2
comments
Mini-Truck (SE06 E05) Tiny Tonka VS MiniTruck RACE. SC win? Boost/Vac gauge AMR300 SC
The race of the century is on youtube right now! Tiny Tonka (suzuki Scrum) VS MiniTruck (Supercharged Daihatsu Hijet) Tonks has been beating mini and all the other minitrucks around for the last couple years, will Mini get the crown? Watch and find out!
Boost vacuum gauge installed, dual temp monitor for suction and boost on supercharger on its way too. Used velcro to mount the gauges until I come up with a batter way.
Places:
Cheezy's garage
Jeffros cobb shop
Watch MotoCheez on Rumble now! https://rumble.com/register/MotoCheez/
Subscribe on YouTube: http://www.youtube.com/motocheez?sub_confirmation=1
Amazon and eBay Affiliate Links:
GlowShift Tinted 7 Color 15 PSI Turbo Boost / Vacuum Gauge Kit: https://amzn.to/3FoZTWV
GlowShift wideband Air Fuel Ratio kit with data logger: https://amzn.to/3wJ9Ueg
AMR300 supercharger: https://amzn.to/3Ds9QCe
Aftermarket eBay 32mm performance carb: https://amzn.to/3CSO0HR
Video Audio products used:
Ordo EP7 4k headgear camcorfer https://amzn.to/3uK8ijo
GoVision Royale video glasses https://amzn.to/303yhaY
DJI Mavic Pro Drone: https://amzn.to/3amDZGd
DJI 8331 low noise propellors: https://amzn.to/3DkCdSk
Get your keyfob, Merch and more at www.motocheez.com
MiniTruck youtube playlist: https://goo.gl/EztFd8
Part links for the minitrucks: https://www.motocheez.com/hijet-mini-truck https://www.motocheez.com/suzuki-carry-dd51
Get your keyfob, Merch at: www.motocheez.com/merchandise
Hijet Climber Mini-truck, this one is a 1992, 7th Gen, S83P, 660cc Minitruck. The “climber” means it has rear axle lock.
S83p specs:
660cc 6 valve 3 cyl engine 48-53hp carburated
weight: 1500 lbs (dry)
length 10'8" (128"). width 4'6" (54") w/o mirrors. Height 5'10" (70")
Load capacity 800 lbs
Max Speed 55-60mph
Valve lash cold: intake 0.18mm exhaust 0.25mm
I know there may be other videos of this.. but this is my Cheezy style!
Due to changing products, links, etc, If you want the most recent product links (if these are no good), go to www.motocheez.com and click the section you're looking for (upper right) and scroll down the page for the item.
This keeps the links for all the parts more accurate. These I use and install on ALL my videos. I do not sell any of the items listed. (except T-shirts and key tags.. HURRY UP AND BUY!)
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez on....
Instagram: https://www.instagram.com/motocheez
Facebook: https://www.facebook.com/MotoCheez
Web: http://www.MotoCheez.com
Custom intro music and Voiceovers by Harp C Chord, Ryan Harper.
Memes etc:
Music:
Movies: Mad Max 2, better off dead, fast and furious, mickey mouse
41
views
Mini-Truck (SE06 E04) AMR300 supercharger – Muffler welded – 2 mile hill climb, mini running MINT!
So I ran a wire direct to the carb solenoid that stays on with the key on and mini ran perfect today! Did a 2 mile hill in 4th geat I could barely do 30mph and made it 45 plus ¼ throttle with power to spare. When I stepped on it to ¾ throttle it climbed even faster!
Boost vacuum gauge installed, dual temp monitor for suction and boost on supercharger on its way too.
Places:
Cheezy's garage
Amazon and eBay Affiliate Links:
GlowShift Tinted 7 Color 15 PSI Turbo Boost / Vacuum Gauge Kit: https://amzn.to/3FoZTWV
GlowShift wideband Air Fuel Ratio kit with data logger: https://amzn.to/3wJ9Ueg
AMR300 supercharger: https://amzn.to/3Ds9QCe
GoVision Royale video glasses https://amzn.to/303yhaY
Aftermarket eBay 32mm performance carb: https://amzn.to/3CSO0HR
Tarp clips, holders: https://amzn.to/3uYrw54
Lego Technic Jeep Wrangler Rubicon: https://amzn.to/3v0n5qs
Tarp bungee balls: https://amzn.to/3v4Hb2L
DJI Mavic Pro Drone: https://amzn.to/3amDZGd
DJI 8331 low noise propellors: https://amzn.to/3DkCdSk
Ordo EP7 4k headgear camcorfer https://amzn.to/3uK8ijo
Milwaukee M18 chainsaw: https://amzn.to/2CjFwvd
Bauer battery conversion: https://amzn.to/3a0UgBo
Bauer and Lynx saw available at Harbor freight!
Get your keyfob, Merch and more at www.motocheez.com
MiniTruck youtube playlist: https://goo.gl/EztFd8
Part links for the minitrucks: https://www.motocheez.com/hijet-mini-truck https://www.motocheez.com/suzuki-carry-dd51
Get your keyfob, Merch at: www.motocheez.com/merchandise
Hijet Climber Mini-truck, this one is a 1992, 7th Gen, S83P, 660cc Minitruck. The “climber” means it has rear axle lock.
S83p specs:
660cc 6 valve 3 cyl engine 48-53hp carburated
weight: 1500 lbs (dry)
length 10'8" (128"). width 4'6" (54") w/o mirrors. Height 5'10" (70")
Load capacity 800 lbs
Max Speed 55-60mph
Valve lash cold: intake 0.18mm exhaust 0.25mm
I know there may be other videos of this.. but this is my Cheezy style!
Due to changing products, links, etc, If you want the most recent product links (if these are no good), go to www.motocheez.com and click the section you're looking for (upper right) and scroll down the page for the item.
This keeps the links for all the parts more accurate. These I use and install on ALL my videos. I do not sell any of the items listed. (except T-shirts and key tags.. HURRY UP AND BUY!)
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez on....
Instagram: https://www.instagram.com/motocheez
Facebook: https://www.facebook.com/MotoCheez
Web: http://www.MotoCheez.com
Custom intro music and Voiceovers by Harp C Chord, Ryan Harper.
5
views
Mini-Truck (SE06 E03) AMR300 supercharger, Carburetor tuning, custom jetting, muffler, oil change
Found the primary jet on the aftermarket 32mm carb, of course it is not a common jet, I do not have a small enough drill so I tapered the end by peening while rolling it. Also drilled out the main jet so it is very close but on the rich side which I rather be. Now I believe my muffler is too small, sounds like a jet engine when I hit ¾ throttle, And I was right, the muffler pipe was too small and restrictive, put the bigger muffler on and it runs mint! did A proper oil change on mini too, Mobile 1 oil filter https://amzn.to/3CmmnWx
The primary jet on the stock carb is in the same location, just not the same jet
Places:
Cheezy's garage
Amazon and eBay Affiliate Links:
Mobile 1 oil filter for S83P: https://amzn.to/3CmmnWx
Rotella T4 15w40: https://amzn.to/3nn4Skx
GlowShift wideband Air Fuel Ratio kit with data logger: https://amzn.to/3wJ9Ueg
AMR300 supercharger: https://amzn.to/3Ds9QCe
GoVision Royale video glasses https://amzn.to/303yhaY
Aftermarket eBay 32mm performance carb: https://amzn.to/3CSO0HR
Tarp clips, holders: https://amzn.to/3uYrw54
Lego Technic Jeep Wrangler Rubicon: https://amzn.to/3v0n5qs
Tarp bungee balls: https://amzn.to/3v4Hb2L
DJI Mavic Pro Drone: https://amzn.to/3amDZGd
DJI 8331 low noise propellors: https://amzn.to/3DkCdSk
Ordo EP7 4k headgear camcorfer https://amzn.to/3uK8ijo
Milwaukee M18 chainsaw: https://amzn.to/2CjFwvd
Bauer battery conversion: https://amzn.to/3a0UgBo
Bauer and Lynx saw available at Harbor freight!
Get your keyfob, Merch and more at www.motocheez.com
MiniTruck youtube playlist: https://goo.gl/EztFd8
Part links for the minitrucks: https://www.motocheez.com/hijet-mini-truck https://www.motocheez.com/suzuki-carry-dd51
Get your keyfob, Merch at: www.motocheez.com/merchandise
Hijet Climber Mini-truck, this one is a 1992, 7th Gen, S83P, 660cc Minitruck. The “climber” means it has rear axle lock.
S83p specs:
660cc 6 valve 3 cyl engine 48-53hp carburated
weight: 1500 lbs (dry)
length 10'8" (128"). width 4'6" (54") w/o mirrors. Height 5'10" (70")
Load capacity 800 lbs
Max Speed 55-60mph
Valve lash cold: intake 0.18mm exhaust 0.25mm
I know there may be other videos of this.. but this is my Cheezy style!
Due to changing products, links, etc, If you want the most recent product links (if these are no good), go to www.motocheez.com and click the section you're looking for (upper right) and scroll down the page for the item.
This keeps the links for all the parts more accurate. These I use and install on ALL my videos. I do not sell any of the items listed. (except T-shirts and key tags.. HURRY UP AND BUY!)
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez on....
Instagram: https://www.instagram.com/motocheez
Facebook: https://www.facebook.com/MotoCheez
Web: http://www.MotoCheez.com
Custom intro music and Voiceovers by Harp C Chord, Ryan Harper.
34
views
3
comments