DIY Flying bike - Motorcycle to Hoverbike
In this exciting video, I will share a project that long kept me awake: transforming an ordinary motorcycle into a hoverbike. This idea was so persistent that I couldn't sleep peacefully until I realized it. Over the past six months, I have been working hard to create this flying device, dreaming of becoming part of the amazing world of aviation and innovation.
In this video, you will see the entire process of my creation, from the idea to the attempt to take off. I paid special attention to developing a mechanism for transferring torque from the motorcycle engine to the propellers. Interesting fact: I made all the propellers for this project myself in my garage, adding uniqueness to my hoverbike.
I will share the technical aspects, engineering solutions, as well as the emotions and challenges I faced in the creation process. Join me on this journey from motorcycle to hoverbike, and find out if I managed to take off and join the club of aviation enthusiasts. Don't miss the story of my unusual flying device!
#diy #howto #hoverbike #flyingbike
97
views
1
comment
I built a brand-new engine with never seen before intake and exhaust system
Hello Guys,
It's time to build something really complicated.
This is kind of experimental video. I have a very old unrealized idea about an internal combustion engine, if be more correctly intake and exhaust system. Usually valves perform this function, in our case it is a camshaft with channels for passing gases.
Ideas can be very logical and interesting on paper, but in practice it is very difficult to prove.
So let's build a brand-new engine with never seen before intake and exhaust system and prove this idea. Whether it will work or not is a very big question. Let's find out.
If this engine works as planned, then it can be built into any car or even build some kind of all-terrain vehicle.
Friends,
As you have already noticed, I read almost all of your messages and am happy to share my ideas with you, and as far as possible, I listen to your opinion.
Share your opinion on this and leave comments.
With best regards
Meanwhile in the Garage
#diyproject
#diyEngine
#buildingEngine
61
views
1
comment
Making of futuristic motorcycle - I Modified Scooter to the two-wheeled vehicle
In this video, I will share with you one of the most challenging projects I have ever done.
I will show you how to make a futuristic motorcycle made from a regular scooter.
When I was still young, I had the idea to make this particular vehicle.
And all after I, as a student, went home by bus and through the window I saw one motorcyclist driving all wet in the mud.
A thought crossed my mind, it would be great if he also sat in the cockpit and could enjoy the ride, and not fight the cold and the inconvenience of the rain.
I think almost all motorcyclists will agree with me.
There is no comfort, and besides, it is dangerous.
Since then, a lot of water has flowed under the bridge, and the idea remained in my head to live.
Honestly, many of the machines that I made and showed you, I made precisely in order to build this futuristic motorcycle (Future Motorcycle).
By the way, I have not yet decided on the name. I think I'll have to ask you to help me.
Please tell me what to call this two-wheeled vehicle.
The name that I like the most, I will leave it.
In order to build this two-wheeled vehicle, I bought and disassembled a scooter.
By the way, the engine of this scooter matched the power of my project, namely 125cc.
I would like my futuristic two-wheeled vehicle to be not only visually beautiful, comfortable, but also economical in terms of fuel consumption.
Fortunately, all my expectations were met, and the result even exceeded my expectations.
Another long-standing goal has been fulfilled, which means that the next more significant projects are in the queue.
I have long dreamed of building an aircraft, and I am more than sure that the realization of this goal is not far off.
Once again, I want to thank my family and friends for their support.
Special thanks to the RocketCars team for their help in filming the final tests.
I look forward to your comments.
See you soon!
Yours sincerely,
Meanwhile in the Garage
67.4K
views
30
comments
Making of futuristic Three-Wheeler Vehicle - I Modified Scooter to the three wheeled vehicle
Friends,
Many of you have already seen my past video in which I converted a kymco scooter into an enclosed motorcycle,
I have read many comments in which you shared your opinion, thanks a lot for that friends!
Many subscribers asked to add another wheel for greater stability when driving, and there were also many suggestions to do something with ventilation, of course, they did not forget the wipers.
So in this video I will share with you how I continued to modify a conventional scooter into a three-wheeled vehicle.
If you haven't seen my first video in which I converted a scooter into an enclosed motorcycle, then I advise you to watch it too:
• Making of futuristic motorcycle - I M...
Now I am really sure that I have become one step closer to realizing my old dream, to make a motorcycle in which it will be comfortable to ride in any weather.
I used an quad bike as a donor, many thanks to my subscriber who made a big discount when I bought it.
By the way, I'll tell you right away, Yes! I myself was very sorry to disassemble such a cool quad bike for parts, but I assure you, in the near future you will see that I will use the remaining parts of this quad bike in one of the following projects.
I had to slightly alter the suspension to make the wheels a little wider and more stable, and I removed the retractable wheels for stabilization altogether.
I will not go into the whole process, I think the video will tell a lot more than I can write here.
When I parked this threewheled vehicle right in the city center,
many had no idea that this futuristic motorcycle was made in a garage, and not a factory one,
Taking this opportunity, I want to thank everyone who supports me and motivates me to do new things !!
Until next time friends!
Sincerely
Meanwhile in the garage
154
views
1
comment
Electric Metal Shear | Making Sheet Metal Cutting Shears
Hello Guys
In this video I will show you how I made Electric Metal cutting machine.
Any DIY master must have at least one metal cutting tool in the garage.
I have long had an idea to make an Electric Metal Shear, although I doubted whether I would be able to implement such an idea.
Fortunately, everything worked out and I managed to create an incredibly convenient and functional Electric Metal Shear.
According to the tradition of Meanwhile in the Garage channel, I collected almost all the spare parts at a metal dump.
Gave an old metal a second life as they say.
Share in the comments how do you like this idea?
How would you make such a machine if you were in my place?
77
views
How To Make A Bench Vise - DIY Metal Bench Vice
Friends, Welcome to Meanwhile in the Garage,
As you know, everything I do in my videos I use in my garage.
The bench vice must be large, high-quality and comfortable.
I had an idea for a long time to make large-sized bench vise, when I had to work with large details, it was necessary to use two vices, which is very inconvenient.
So I decided to make my own bench vise with a large girth, so that it would be possible to work with large and not only things.
I am very pleased when one of my long-standing ideas becomes a reality.
Next, I plan to make a mobile table on which I will attach these bench vice, so it will be very convenient for me to fix large and heavy things in order to make welding or grind something.
In any case, I do not think that this vice will remain without work.
By the way, in my last videos I often used the word homemade, I said this because the garage is in my house and I do things as if at home, but it turns out that many people did not like the fact that I had a Lathe and a milling machine.
Once I myself really wanted to have the right materials and tools at hand, I also came to this not in one day.
Enjoy watching friends.
I read almost all the comments and try to answer all your questions.
Greetings from the Garage
77
views
DIY Multifunctional Adjustable Belt Sander Grinder
Hello friends.
Of course, many will say that such a belt sander is better to buy in a store than to bother and spend so much time.
In my case, it was like this: Since I recently started making DIY videos, I really need a Grinder. Having looked on the website of some manufacturers how much the average machine costs, my jaw dropped.
I don’t have that much money, and in general these belt grinders didn’t have the functions I needed. So I decided to build my own multifunctional belt sander.
The advantage of my Belt sander is that I can change the angle of the belt, and I also added a frequency control that helps to adjust the speed of the belt feed.
Even at the beginning, when I just added this video, many said that my Multifunctional adjustable belt sander would not even last a month, but as you can see in my new videos, it still works and works properly.
By the way, they ask me a lot about how I protected the frequency converter from metal dust, I just took and smeared the microcircuit with a thick layer of varnish and no dust now gets there and cannot make a short circuit on the microcircuit board, that's the whole secret.
I am often asked about where I got these wheels from and what they are from, to be honest, I have no idea, I just found them at the metal reception, and they seemed to me suitable for my project, so I applied them.
Share your opinion, how do you like this machine? Would you like it in your garage?
See you soon!
65
views
Vintage Cleaver (Butcher's knife) restoration - DIY tool restoration - MWIG
Vintage Cleaver (Butcher's knife) restoration - DIY tool restoration - MWIG
After seeing my videos on YouTube, my neighbor asked me to restore his Old Cleaver also called Butcher's Knife
I will not say that this is the best restoration, but I really liked the process of restoration.
I figured it would be very simple to restore this Cleaver, but it turned out that this is not such an easy process.
Enjoy watching my friends.
If you like this video, do not forget to like and share with friends.
66
views
1
comment
Making a KATANA out of Titanium - How I made Katana sword from Titanium
Making a Katana from titanium or how I made a Katana sword from titanium, to be honest, I myself did not figure out the name.
I'll leave this question to the viewer's judgment, to share your opinion after watching the video.
I think there are few people among us who have not seen films about the Samurai.
As someone who deeply respects Japanese culture, I have always admired this sword.
Japanese craftsmen have invested many years of their lives making a real work of art in the form of a Katana sword.
I have always dreamed of having a Katana sword in my collection, but not everyone can afford such pleasure, so I decided to make this sword myself.
There are a lot of videos on YouTube showing the process of making a Japanese Katana Samurai sword from different materials, a Katana from a Chain, a Katana from Damascus steel, there is even a video showing the process of making a katana sword from a large wrench.
Since I love the high-tech approach, I decided to make a titanium katana sword using all the tools and machines I have in my workshop.
As tests have shown, this titanium Katana sword was not only beautiful to look at, but also very durable.
I think this will not be a bad copy for my personal collection.
62
views
Powerful mini Cannon - Make a mini Cannon - MWIG
Dear friends,
Welcome to Meanwhile in the Garage.
This video is for Educational and Demonstration purposes only!
Since childhood, I had an idea to make a miniature cannon, although so much time has passed, but I still had this idea.
So I decided to make a miniature Cannon. It can shoot by the way.
In order to make such a Cannon, you will need a whole workshop, a lathe, a milling machine, several weeks of effort.
If you have any crazy ideas or suggestions, please write them down
114
views
DIY Sheet Metal Bender Machine - Making Metal Rolling Machine in home workshop
In this video I want to show you one of the most difficult projects I have made.
I will show you how I made Sheet Metal Bender Machine in my Meanwhile in the Garage workshop,
This sheet metal bender is constructed from I-beam, pipe, bearings, steel plate, threaded rod, nuts, sprockets, chain, and a gear motor.
I thought a lot about how I will make it and what the mechanism of this machine will be.
After much thought, I caught myself thinking that I needed inspiration and new ideas.
To do this, I spotted the best bending machines' manufacturer, it turned out to be Swebend.
I am very grateful to the whole Swebend team for such a warm welcoming and hospitality.
They showed me how they produce Bending machines of all complexities and most importantly what high quality and love for their work they put in.
I really was very impressed with my trip to Swebend in Hässleholm (Sweden).
68
views