Endless Money Pits

This is still a very small channel but I wanted to tell you guys the story of how I got started making YouTube videos. You have all been extremely supportive and I hope to be here for a long time. Thank you for watching.

Change the oil on your Yamaha XT250 yourself and safe some money! NOTE: I wasn’t provided with the correct oil or the o-rings for this job, so we will change it sooner than usual next time. LINKS: Torque wrench: https://amzn.to/3ooqxJl Socket set: https://amzn.to/3uDDza3 Hex socket set: https://amzn.to/3unV5yW Wrench set: https://amzn.to/32T9pE2 And a tiny flat head screwdriver: https://amzn.to/3sbUm0L A funnel: https://amzn.to/3LhpQeS Fluid catch pan: https://amzn.to/3uo6Xks Gloves: https://amzn.to/3IUg00c Stool: https://amzn.to/36KSJQZ Motorcycle stands: https://amzn.to/3rv1gyA Motorcycle oil 20w-40: https://amzn.to/3kYBZsX Oil filter: https://amzn.to/3kYiyAL Crush washers: https://amzn.to/32X9rec Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US TOOLS USED: • Torque wrench • Socket wrench • Socket extension • 12mm socket • 5mm hex • 14mm wrench • And a tiny flat head screwdriver For this job I also needed: • A funnel • Fluid catch pan • Gloves • A stool • A stand • 2 quarts of 10w-40 motorcycle oil • An oil filter • And a crush washer A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! Music not provided by YouTube: “Song E01” by Seth Schneider sethds93@gmail.com **This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this. **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

What mods and maintenance should we consider doing to this Yamaha XT250? LINKS: Motorcycle Stands: https://amzn.to/3rv1gyA Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! Music not provided by YouTube: “Song E01” by Seth Schneider sethds93@gmail.com **This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this. **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Quadlock fork stem phone mount installation and review. NOTE: All of this footage vanished as soon as I downloaded it to my computer. I had to use a program called Recouva to recover the files, but I got almost all of them back! Moral: don’t cut and paste important things. LINKS: Quadlock fork stem mount: https://amzn.to/3OCPAE8 Quadlock wireless charging head: https://amzn.to/3LumV2d Quadlock vibration dampener: https://amzn.to/38hOhJZ Flat head screwdriver: https://amzn.to/3unqAsT Air compressor: https://amzn.to/38XZXSA Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! Music not provided by YouTube: “Song E01” by Seth Schneider sethds93@gmail.com **This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this. **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

2021 Honda CRF300L Rally review and first impressions. LINKS: Motorcycle stands: https://amzn.to/3rv1gyA Motorcycle cover: https://amzn.to/3uOowK3 Battery tender: https://amzn.to/3KSz1Sa Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! Music not provided by YouTube: “Song E01” by Seth Schneider sethds93@gmail.com **This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this. **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Install lowering bolts on your Corvette yourself and save some money! NOTE: Never get under a car supported solely by a floor jack, and be careful not to pinch your fingers. LINKS: Lowering bolt kit: https://amzn.to/3KiHAFy Torque wrench (1/2” drive): https://amzn.to/3HqCZjq Torque wrench (3/8” drive): https://amzn.to/3ooqxJl Socket set: https://amzn.to/3IZm73p Socket extensions: https://amzn.to/34hFxBT Pry bar: https://amzn.to/3utTzer Ratcheting wrenches: https://amzn.to/32SN2hY Plastic mallet: https://amzn.to/3HBYRYU Caliper micrometer: https://amzn.to/3IT82Em Retaining ring pliers: https://amzn.to/3uXYOBL Impact wrench: https://amzn.to/3L8Wora Floor jack: https://amzn.to/37D10qc Jack stands: https://amzn.to/3sgH6be Creeper: https://amzn.to/3sgEE4q Rolling stool: https://amzn.to/36KSJQZ Handheld light: https://amzn.to/3uoiwIo Gloves: https://amzn.to/36WLk1b Safety glasses: https://amzn.to/35AO9ns Tape measure (SAE): https://amzn.to/36Fd3TX Tape measure (metric): https://amzn.to/3Lnw8bO Penetrating oil: https://amzn.to/3HsfAhn Milwaukee impact driver: https://amzn.to/3tC97vN Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US TOOLS USED: • A couple torque wrenches • A couple socket wrenches • A few socket extensions • 10mm socket • 13mm socket • 15mm socket • 19mm socket • 21mm socket • Pry bar • 22mm wrench • 18mm wrench • 13mm wrench • Really old plastic mallet • Caliper micrometer • Retaining ring pliers • Impact wrench • Floor jack • Jack stands (I used four) For this job I also needed: • A creeper • Stool • A light • Gloves • Safety glasses • Tape measure • Penetrating oil • Four wood blocks • Two rubber mats • And a kit with front and rear lowering bolts A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! **This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this. **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Lower your Corvette yourself and save a lot of money! NOTE: Never get under a car that is only supported by a jack. LINKS: Torque wrench: https://amzn.to/3HqCZjq Two socket wrenches: https://amzn.to/3uDDza3 Ratcheting wrenches: https://amzn.to/32SN2hY Painter’s tape: https://amzn.to/3gr2k0t Standard tape measure: https://amzn.to/36Fd3TX Metric tape measure: https://amzn.to/3Lnw8bO Caliper micrometer: https://amzn.to/3IT82Em Impact driver: https://amzn.to/3L8Wora Floor jack: https://amzn.to/3gjrL47 Jack stands: https://amzn.to/3sgH6be Gloves: https://amzn.to/3IUg00c Safety glasses: https://amzn.to/35AO9ns Penetrating oil: https://amzn.to/3HsfAhn Handheld light: https://amzn.to/3uoiwIo Rolling stool: https://amzn.to/36KSJQZ Creeper: https://amzn.to/3sgEE4q Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US TOOLS USED: • Torque wrench • Two socket wrenches • 18mm socket • 19mm socket • 21mm socket • 10mm ratcheting wrench • Painter’s tape • Tape measure • Caliper micrometer • Impact driver • Floor jack • And a set of jack stands For this job I also needed: • Four wood blocks • Two rubber mats • Gloves • Safety glasses • Penetrating oil • A light • A stool • And a creeper A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! Music not provided by YouTube: “Song E01” by Seth Schneider sethds93@gmail.com **This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this. **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the corner marker lenses on your Corvette yourself and save some money! NOTE: Never get under a car that is only supported by a floor jack. LINKS: Corner marker lenses: https://amzn.to/3wqgUyR Electric screwdriver: https://amzn.to/3Hoafrt Socket set: https://amzn.to/3AV6M18 Dielectric grease: https://amzn.to/3rnRLSk Floor jack: https://amzn.to/3gjrL47 Jack stands: https://amzn.to/3sgH6be A creeper: https://amzn.to/3sgEE4q And a light: https://amzn.to/3uoiwIo Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US TOOLS USED: • Electric screwdriver • Socket wrench • Long socket extension • Short socket extension • 10mm socket • 9/32” socket • Dielectric grease • Floor jack • Jack stands • A creeper • And a light For this job I also needed: • Two blocks of wood • Two rubber mats Music not provided by YouTube: “Song E01” by Seth Schneider sethds93@gmail.com A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! **This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this. **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the rear side markers on your Corvette yourself and save some money! NOTE: LED bulbs only work one way. If you plug in an LED bulb and it doesn’t work, try plugging it in the other way. LINKS: LED Rear Side Markers: https://amzn.to/3hDsjT0 Standard Rear Side Marker Lenses: Please send me a link if you find one! Halogen Bulbs for Rear Side Markers: https://amzn.to/3IOFYTm LED Bulbs for Rear Side Markers: https://amzn.to/3IPxT0H Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US TOOLS USED: • 11mm ratcheting wrench • A pair of vice grips • A light A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! **This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this. **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the taillight bulbs in your Corvette yourself and save some money! NOTE: The LED bulbs pictured are not the only compatible part for this car. You may find other compatible LED taillight bulbs with different part numbers. LINKS: LED Taillight Bulbs: https://amzn.to/3pxkhiS Halogen LED Taillight Bulbs: https://amzn.to/3pt1NQP Electric Screwdriver: https://amzn.to/3Hoafrt Phillips Screwdriver: https://amzn.to/34wLzhH Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US TOOLS USED: • Electric Screwdriver A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! **This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this. **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Work on your Corvette from home and save a bunch of money! NOTE: Cars weigh a lot. Always use jack stands if you’re getting under a suspended car. LINKS: Floor jack: https://amzn.to/3gjrL47 Jack stands: https://amzn.to/3sgH6be A light: https://amzn.to/3uoiwIo Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US TOOLS USED: • Floor jack • Jack stands • A light For this job I also needed: • Wood blocks • Rubber mats A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! Music not provided by YouTube: “Song E01” by Seth Schneider sethds93@gmail.com **This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this. **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Reset the oil service reminder in your Corvette yourself and save a tiny bit of money! NOTE: Somebody loves you, so be careful out there. LINKS: Oil Change Video: Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! Music not provided by YouTube: “Song E01” by Seth Schneider sethds93@gmail.com **This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this. **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Change the oil in your Corvette yourself and save some money! NOTE: Please recycle your used automotive fluids! LINKS: Combination wrench set: https://amzn.to/32T9pE2 S-Wrench set: https://amzn.to/3sx6NVp Oil filter wrench: https://amzn.to/3gjIDrt Plastic mallet: https://amzn.to/3HBYRYU Floor jack: https://amzn.to/3gjrL47 Jack stands: https://amzn.to/3sgH6be Fluid catch pan: https://amzn.to/3uo6Xks Funnel: https://amzn.to/3LhpQeS A light: https://amzn.to/3uoiwIo Creeper: https://amzn.to/3sgEE4q Gloves: https://amzn.to/3IUg00c Safety Glasses: https://amzn.to/35AO9ns 5w-30 full synthetic oil: https://amzn.to/3uplE6G Oil filter: https://amzn.to/35F2qQg Oil additive: https://amzn.to/3BZPSig Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US TOOLS USED: • 15mm wrench • Oil filter wrench • Plastic mallet • Floor jack • Jack stands • Fluid catch pan • Funnel • A light • Creeper • Gloves Tools I should have used: • Breaker bar • Torque wrench • Socket wrench • Socket extension • 15mm socket • Oil filter wrench • Plastic mallet • Floor jack • Jack stands • Fluid catch pan • Funnel • A light • Creeper • Gloves For this job I also needed: • 6.5 quarts of 5w-30 full synthetic oil • And an oil filter • Wood blocks • Rubber mat A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! Music not provided by YouTube: “Song E01” by Seth Schneider sethds93@gmail.com **This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this. **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Use BMW Standard Tools software to work on your e46 at home and save a bunch of money! LINKS: Installation Files: https://drive.google.com/drive/folders/1Odd9etzajiDBUYiso5NsTMZSoTOkeTXl?usp=sharing WinZip: https://www.winzip.com/en/download/winzip/ K+DCAN Cable: https://amzn.to/3gCWLfC 20 Pin Adapter Cable: https://amzn.to/3sx2x81 Basic Laptop: https://amzn.to/3rRQSSb Original write-up by Bali: https://www.e46fanatics.com/threads/how-to-install-bmw-standard-tools.1274003/#post-18752565 Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US SUPPLIES USED: • Windows 7 or better laptop with a charging cable • K+DCAN cable with a switch • 20 Pin Adapter Cable • And installer files from my Google Drive A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! **This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this. **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the spark plug wires on your Corvette yourself and save some money! NOTE: That new outro song is bangin’. Thanks, Seth. LINKS: Spark Plug Wires: https://www.amazon.com/dp/B0006HP9ZS/ref=cm_sw_em_r_mt_dp_ABKZSJ159Z7681Z047EA Spark Plugs (NGK Iridium): https://www.amazon.com/dp/B00PMEMPM0/ref=cm_sw_em_r_mt_dp_P9QGGD8GJ0RQ3ZXNT4ER Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US For this job I needed: • Gloves • Dielectric grease • A prying tool • And a set of spark plug wires A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! Music not provided by YouTube: “Song E01” by Seth Schneider sethds93@gmail.com **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the spark plugs and wires on your Corvette yourself and save a lot of money! NOTE: Modern spark plugs are made with a layer of anti-seize built into the threads and usually come pre-gapped for their intended application. LINKS: Spark Plugs (NGK Iridium): https://www.amazon.com/dp/B00PMEMPM0/ref=cm_sw_em_r_mt_dp_P9QGGD8GJ0RQ3ZXNT4ER Spark Plug Wires: https://www.amazon.com/dp/B0006HP9ZS/ref=cm_sw_em_r_mt_dp_ABKZSJ159Z7681Z047EA Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US TOOLS USED: • Breaker bar • Torque wrench • Socket wrench • Channel locks • 8” socket extension • 2” socket extension • Half inch socket extension • Universal joint socket adapter • 5/8” spark plug socket • And a prying tool For this job I also needed: • Gloves • Dielectric grease • Eight iridium spark plugs • And a set of spark plug wires A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! Music not provided by YouTube: “Song E01” by Seth Schneider sethds93@gmail.com **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace or upgrade the fog light bulbs in your Corvette yourself and save some money! NOTE: LED lights may not be legal in your area. Check local laws before installing. LINKS: LED Fog Light Bulbs: https://www.amazon.com/dp/B07HL4JSM6/ref=cm_sw_em_r_mt_dp_ENN768ZMEGFD7YC57EY8 Halogen Fog Light Bulbs: https://www.amazon.com/dp/B001ULS4KG/ref=cm_sw_em_r_mt_dp_RGWTW4Q5FV8YMMWQJ7PF Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US TOOLS USED: • Electric screwdriver • Phillips #2 bit • And a magnetic bowl For this job I also needed • Gloves • And a set of LED bulbs A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! Music not provided by YouTube: “Song E01” by Seth Schneider sethds93@gmail.com **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the headlight bulbs in your Corvette yourself and save some money! NOTE: LED lights may not be legal in your area. Check local laws before installing. LINKS: LED high and low beam kit: https://www.amazon.com/dp/B07JNV9TKM/ref=cm_sw_em_r_mt_dp_Y1FKAEVYGM1MYJNRF8FA?_encoding=UTF8&psc=1 Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US TOOLS USED: A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! Music not provided by YouTube: “Song E01” by Seth Schneider sethds93@gmail.com **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the air filter on your C5 Corvette yourself and save some money! NOTE: Corvettes are sweet. LINKS: Air Filter: https://www.amazon.com/dp/B000C9TCA8/ref=cm_sw_em_r_mt_dp_PYA09Y2V6Q7VVAQKWG9X Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the headlight switch on your Toyota Yaris yourself and save a bunch of money! NOTE: Always disconnect the battery and use extra caution when working with airbags. LINKS: Headlight Switch (fits 2007-2010 Yaris): https://www.autozone.com/electrical-and-lighting/turn-signal-switch/p/duralast-turn-signal-switch-sw8100/82218_0_0 Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US TOOLS USED: • Breaker bar • Torque wrench • A couple socket wrenches • A couple socket extensions • 19mm socket • 10mm socket • ¼ inch socket • T30 torx bit • Electric screwdriver • Phillips screwdriver bit • Needle nose pliers • Flat head screwdriver • And a tiny flat head screwdriver For this job I also needed: • Some tape • Safety glasses • A paint marker • Some medium strength thread locker • And a new headlight switch MUSIC NOT PROVIDED BY YOUTUBE: “Piece Pipe” by Seth Schneider - sethds93@gmail.com A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the thermostat and coolant temp sensor on your Ford Taurus or Mercury Sable yourself and save some money! NOTE: Coolant is toxic stuff – please keep it away from animals. LINKS: Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US TOOLS USED: • Breaker bar • Socket wrench • Socket extension • 19mm deep socket • 10mm socket • 5/16 socket • Universal socket joint • Channel locks For this job I also needed: • Some coolant to top off the system • Thermostat • Coolant temperature sensor • Gasket maker made specifically for cooling systems • A razor blade • Steel wool • And a funnel A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.

Replace the drive belt on your Toyota Yaris yourself and save some money! NOTE: Let the engine cool down before working on it so you don’t get burned. LINKS: New belt: https://www.amazon.com/dp/B000C2UJLQ/ref=cm_sw_em_r_mt_dp_8K4KM84H57PETS1BGERT Want to support my channel? Become a patron! https://www.patreon.com/EndlessMoneyPits Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US TOOLS USED: • Pry bar • Socket wrench • And a 12mm socket A huge thanks goes to my sole Patreon supporter, Elizabeth Y.! **Disclaimer** Due to the litigious world we live in, I have to include this statement: I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.