Brake Fluid Flush – Nissan Maxima 2009-2014
Change your Nissan Maxima’s brake fluid yourself and save some money!
NOTE:
Please recycle your used automotive fluids!
LINKS:
Torque wrench: https://amzn.to/3ooqxJl
21mm socket: https://amzn.to/3wyRVsh
Wrench set: https://amzn.to/32T9pE2
Impact wrench (corded): https://amzn.to/3L8Wora
Impact driver (cordless): https://amzn.to/3tC97vN
Floor jack: https://amzn.to/3gjrL47
Jack stands: https://amzn.to/3sgH6be
Creeper: https://amzn.to/3sgEE4q
Rolling stool: https://amzn.to/36KSJQZ
Drop light: https://amzn.to/3uoiwIo
Silicone tubing: https://amzn.to/3olmVI8
Plastic container: https://amzn.to/3R7hAQQ
Funnel: https://amzn.to/3LhpQeS
Gloves: https://amzn.to/3IUg00c
DOT 3 brake fluid: https://amzn.to/3POcXKl
Want to support my channel? Donate to me via PayPal! https://paypal.me/EndlessMoneyPits?locale.x=en_US
Become a patron!: https://www.patreon.com/EndlessMoneyPits
TOOLS USED AND SUPPLIES USED:
• Torque wrench
• 21mm socket
• 8mm wrench
• Impact driver
• Floor jack
• Jack stands
• A Creeper
• A stool
• A light
• Silicone tubing
• Plastic container
• Funnel
• Rubber gloves
• DOT 3 brake fluid
A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!
Music not provided by YouTube:
“Song E01” by Seth Schneider
sethds93@gmail.com
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.
30
views
GIVI Crash Bars Installation - Honda CB500X 2013-2017
Install Givi Crash Bars on your Honda CB500X yourself and save some money!
NOTE:
Don’t tip the bike over when you’re jacking it up!
LINKS:
Crash bar kit: https://amzn.to/3dDM5iF
Hacksaw: https://amzn.to/3QBwoY3
Impact driver: https://amzn.to/3tC97vN
Breaker bar: https://amzn.to/348rIWD
Torque wrench: https://amzn.to/3ooqxJl
Socket set: https://amzn.to/3IZm73p
Socket extensions: https://amzn.to/34hFxBT
Wrenches: https://amzn.to/32T9pE2
Hex bit set: https://amzn.to/3unV5yW
Phillips #1 screwdriver: https://amzn.to/3AxJqQu
Plastic mallet: https://amzn.to/3HBYRYU
Floor jack: https://amzn.to/3gjrL47
Motorcycle stands: https://amzn.to/3rv1gyA
Magnetic bowl: https://amzn.to/3HsWtnA
Rags: https://amzn.to/3J6prtT
M10 x 1.25 Bolts: https://amzn.to/3dMvn0o
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US
TOOLS AND SUPPLIES USED:
• Hacksaw
• Impact driver
• Breaker bar
• Torque wrench
• Socket wrench
• A couple socket extensions
• 12mm socket
• 13mm socket
• 14mm socket
• 17mm socket
• 12mm wrench
• 5mm hex bit
• Phillips #1 bit
• The closest thing I could find to a plastic mallet
• A floor jack
• And a rear stand
For this job I also needed:
• Magnetic bowl
• A rag
• A piece of cardboard
• The key
• The crash bar kit
• And two bolts size M10 x 1.25 x 50 mm
A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!
Music not provided by YouTube:
“Song E01” by Seth Schneider
sethds93@gmail.com
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.
81
views
Skid Plate Installation - Honda CB500X 2013-2019
Install a skid plate on your Honda CB500X yourself and save some money!
NOTE:
I’ve had hundreds of good transactions on ebay, but things go wrong from time to time. Let the buyer beware.
LINKS:
Skid Plate Kit: https://www.ebay.com/itm/124876814797?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JClV-wLvQ5y&sssrc=2047675&ssuid=97goYarfTGy&widget_ver=artemis&media=COPY
Impact driver: https://amzn.to/3tC97vN
Breaker bar: https://amzn.to/348rIWD
Torque wrench: https://amzn.to/3ooqxJl
Socket set: https://amzn.to/3IZm73p
Hex wrench set: https://amzn.to/32U647P
Wrench set: https://amzn.to/32T9pE2
Magnetic bowl: https://amzn.to/3HsWtnA
Waterproof grease: https://amzn.to/3xwXkQ9
Thread locker: https://amzn.to/3AZh9RK
Towels: https://amzn.to/39a22vd
Rags: https://amzn.to/3J6prtT
Motorcycle stands: https://amzn.to/3rv1gyA
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US
TOOLS AND SUPPLIES USED:
• Impact driver
• Breaker bar
• Torque wrench
• Socket wrench
• 14mm socket
• 12mm socket
• 5mm hex
• 6mm hex
• 13mm wrench
• And a magnetic bowl
• Waterproof grease
• Medium strength thread locker
• A towel to lay parts on
• A rag
• Some cardboard to sit on
• A rear stand
• And the skid plate kit
A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!
Music not provided by YouTube:
“Song E01” by Seth Schneider
sethds93@gmail.com
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.
34
views
C5 Corvette K&N Cold Air Intake Installation 1997-2004
Install a K&N Cold Air Intake on your Corvette yourself and save a bunch of money!
NOTE:
That emissions exemption sticker is really important if you live in an area that requires emissions testing, or if you get pulled over in one of those areas by a cop that wants to ruin your day. Don’t lose that sticker!
LINKS:
K&N cold air intake: https://amzn.to/3QdgToW
K&N filter cleaning kit: https://amzn.to/3QyKOr9
Vented fog light shrouds: https://amzn.to/3LBeSjc
Electric screwdriver: https://amzn.to/3Hoafrt
Impact driver: https://amzn.to/3tC97vN
Socket wrench set: https://amzn.to/3IZm73p
Socket extensions: https://amzn.to/34hFxBT
Wrench set: https://amzn.to/32T9pE2
Needle nose pliers: https://amzn.to/3L7jvCv
Flathead screwdriver: https://amzn.to/3J3azft
Tiny flat head screwdriver: https://amzn.to/3sbUm0L
Silicone grease: https://amzn.to/3J1iryo
Paint markers: https://amzn.to/3grqTdH
Magnetic bowl: https://amzn.to/3HsWtnA
Prying tools: https://amzn.to/3MAwYCl
Floor jack: https://amzn.to/37D10qc
Jack stands: https://amzn.to/3sgH6be
Light: https://amzn.to/3uoiwIo
Creeper: https://amzn.to/3sgEE4q
Towels: https://amzn.to/39a22vd
Safety glasses: https://amzn.to/35AO9ns
Gloves: https://amzn.to/3IUg00c
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US
TOOLS USED FOR COLD AIR INTAKE:
• Electric screwdriver
• Socket wrench
• Long socket extension
• 6mm socket - size needed for hose clamps may vary
• 8mm socket - size needed for hose clamps may vary
• 10mm socket
• 10mm wrench
• 14mm wrench
• 19mm wrench
• Needle nose pliers
• Flathead screwdriver
• Tiny flat head screwdriver
• Silicone grease
• Paint marker
• Magnetic bowl
• And a bench vice
TOOLS USED FOR VENTED FOG LIGHT SHROUDS:
• Two socket wrenches
• Two long socket extensions
• 7mm socket
• 10mm socket
• 14mm wrench
• 19mm wrench
• Needle nose pliers
• Prying tool
• Jack
• Jack stands
• Electric screwdriver
• Impact driver
• A light
• Creeper
• Two towels
• Safety glasses
• Gloves
• Two wood blocks
• And a magnetic bowl
A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.
17
views
1,000 Subscribers on YouTube and an Update on Life
Thank you all for subscribing and for supporting this little venture of mine.
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US
5
views
Yamaha XT250 Serow Hand Lever Replacement
Replace the hand levers on your motorcycle yourself and save some money!
NOTE:
• Always get nuts and bolts started by hand before using tools to avoid cross-threading.
• I didn’t have a 10mm impact socket so I used a regular one, but ordered the proper socket after filming this video.
LINKS:
Hand levers: https://amzn.to/3xDJdZv
Impact driver: https://amzn.to/3tC97vN
Socket set: https://amzn.to/3IZm73p
Chain lube: https://amzn.to/3L6WejZ
Cable luber: https://amzn.to/3sAzDoy
Tape measure (SAE): https://amzn.to/36Fd3TX
Tape measure (metric): https://amzn.to/3Lnw8bO
Gloves: https://amzn.to/3IUg00c
Waterproof grease: https://amzn.to/3xwXkQ9
Rags: https://amzn.to/3J6prtT
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US
TOOLS AND SUPPLIES USED:
• Impact driver
• 10mm socket
• Wax based chain lube
• Cable luber
• Tape measure
• Gloves
• A rag
• Waterproof grease
A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!
Music not provided by YouTube:
“Song E01” by Seth Schneider
sethds93@gmail.com
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.
10
views
UPDATE: Adjustable External Voltage Regulator Issue Resolved
Here's an update on an issue I was having with the Quick Start adjustable external voltage regulator I installed in a previous video. The issue was not due to the voltage regulator, it was due to a bad ground in my Jeep. The company was very helpful in pinpointing the cause of the issue for me.
LINKS:
Quick Start Voltage Regulators and Kits: https://alternatorparts.com/external-voltage-regulator-high-output-alternator-kit.html
Socket Set with 3/8" Drive: https://amzn.to/3gkCwn2
Socket Set with 1/4" Drive: https://amzn.to/3AV6M18
Socket extensions: https://amzn.to/34hFxBT
Dikes: https://amzn.to/3GprWFV
Wire Strippers: https://amzn.to/3L8I3Lg
Multimeter: https://amzn.to/3ulybIa
Circuit tester: https://amzn.to/3rq7rEQ
Heat gun: https://amzn.to/3oi4Avl
Heat Shrink Tubing: https://amzn.to/3ghglOx
Dielectric Grease: https://amzn.to/3rnRLSk
Sandpaper (400 Grit): https://amzn.to/35LRyjz
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.
10
views
My First Motorcycle Crash - 10 Years Ago Today - Alone in the Forest
June 27th, 2012 I was taking my 2001 Suzuki DR-z400s for a relaxing ride through the forest when I hit some gravel on a corner and crashed. At the end I said I had an hour ride home, but about 10 miles down the road I noticed that damaged handguard was missing a screw. I went back for it even though I thought there was no chance I'd find it mixed in with the gravel, but I did! Made my ride home a lot longer, but I'll never forget that day.
Note: Watch out for gravel.
3
views
Yamaha XT250 Serow Spark Plug Replacement
Check or replace the spark plug on your Yamaha XT250 yourself and save some money!
NOTE:
Replace damaged spark plugs.
LINKS:
• Socket wrench set: https://amzn.to/3gkCwn2
• Torque wrench: https://amzn.to/3ooqxJl
• Deep socket set: https://amzn.to/3zL6Fqf
• Spark plug gap tool: https://amzn.to/3AUPd1a
• Air compressor: https://amzn.to/38XZXSA
• Stool: https://amzn.to/36KSJQZ
• Spark plug: https://amzn.to/3HClyNE
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US
TOOLS AND SUPPLIES USED:
• Socket wrench
• Torque wrench
• 18mm deep socket
• Spark plug gap tool
• Air compressor
• A stool
A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.
19
views
Yamaha XT250 Serow Gear Shift Lever Replacement
Replace the gear shift lever on your Yamaha XT250 (Serow) yourself and save some money!
LINKS:
Torque wrench: https://amzn.to/3ooqxJl
Socket set: https://amzn.to/3IZm73p
Wrench set: https://amzn.to/32T9pE2
Ratcheting wrench set: https://amzn.to/32SN2hY
Hex wrenches: https://amzn.to/32U647P
Vice grips: https://amzn.to/3xBItUL
Plastic mallet: https://amzn.to/3HBYRYU
Paint marker: https://amzn.to/3grqTdH
Thread locker: https://amzn.to/3AZh9RK
Impact driver: https://amzn.to/3tC97vN
Gloves: https://amzn.to/36WLk1b
Waterproof grease: https://amzn.to/3xwXkQ9
Rolling stool: https://amzn.to/36KSJQZ
Motorcycle stands: https://amzn.to/3rv1gyA
Gear shift lever: https://www.ebay.com/itm/234148646232?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=nKctqDrATVe&sssrc=2047675&ssuid=97goYarfTGy&widget_ver=artemis&media=COPY
Gear shift lever bolt: https://www.partzilla.com/product/yamaha/5XT-27434-10-00?ref=8664c51c2ff5d620c48ee1c974b5e31a76fc7ddd
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US
TOOLS AND SUPPLIES USED:
• Torque wrench
• Socket wrench
• 10mm socket
• 10mm wrench
• 11mm wrench
• 10mm ratcheting wrench
• 6mm hex
• 4mm hex
• Vice grips
• Really old plastic mallet
• Paint marker
• Thread locker
• Impact driver
• Gloves
• Waterproof grease
• A stool
• A set of stands
A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!
Music not provided by YouTube:
“Song E01” by Seth Schneider
sethds93@gmail.com
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.
55
views
C5 Corvette Front Bumper Cover Removal & Installation 1997-2004
Remove and install the bumper cover on your C5 Corvette yourself and safe a bunch of money!
LINKS:
• Socket set: https://amzn.to/3gkCwn2
• Wrench set: https://amzn.to/32T9pE2
• Needle nose pliers: https://amzn.to/3L7jvCv
• Plastic prying tool: https://amzn.to/3rx7q1X
• Metal prying tool: https://amzn.to/3MAwYCl
• Electric screwdriver: https://amzn.to/3Hoafrt
• Impact driver: https://amzn.to/3tC97vN
• Low profile floor jack: https://amzn.to/37D10qc
• Jack stands: https://amzn.to/3sgH6be
• Work light: https://amzn.to/3uoiwIo
• Creeper: https://amzn.to/3sgEE4q
• Towels: https://amzn.to/39a22vd
• Safety glasses: https://amzn.to/35AO9ns
• Rubber gloves: https://amzn.to/3IUg00c
• Padded gloves: https://amzn.to/36WLk1b
• Magnetic bowl: https://amzn.to/3HsWtnA
• Fog light shrouds: https://amzn.to/3LBeSjc
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US
TOOLS AND SUPPLIES USED:
• Two socket wrenches
• Two long socket extensions
• 7mm socket
• 10mm socket
• 14mm wrench
• 19mm wrench
• Needle nose pliers
• Prying tool
• Jack
• Jack stands
• Electric screwdriver
• Impact driver
• A light
• Creeper
• Two towels
• Safety glasses
• Gloves
• Two wood blocks
• Magnetic bowl
• And a set of vented fog light shrouds
A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!
Music not provided by YouTube:
“Song E01” by Seth Schneider
sethds93@gmail.com
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.
10
views
C5 Corvette Vented Fog Light Shrouds Installation 1997-2004
Install vented fog light shrouds yourself and safe a bunch of money!
LINKS:
• Socket set: https://amzn.to/3gkCwn2
• Wrench set: https://amzn.to/32T9pE2
• Needle nose pliers: https://amzn.to/3L7jvCv
• Plastic prying tool: https://amzn.to/3rx7q1X
• Metal prying tool: https://amzn.to/3MAwYCl
• Electric screwdriver: https://amzn.to/3Hoafrt
• Impact driver: https://amzn.to/3tC97vN
• Low profile floor jack: https://amzn.to/37D10qc
• Jack stands: https://amzn.to/3sgH6be
• Work light: https://amzn.to/3uoiwIo
• Creeper: https://amzn.to/3sgEE4q
• Towels: https://amzn.to/39a22vd
• Safety glasses: https://amzn.to/35AO9ns
• Rubber gloves: https://amzn.to/3IUg00c
• Padded gloves: https://amzn.to/36WLk1b
• Magnetic bowl: https://amzn.to/3HsWtnA
• Fog light shrouds: https://amzn.to/3LBeSjc
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US
TOOLS AND SUPPLIES USED:
• Two socket wrenches
• Two long socket extensions
• 7mm socket
• 10mm socket
• 14mm wrench
• 19mm wrench
• Needle nose pliers
• Prying tool
• Jack
• Jack stands
• Electric screwdriver
• Impact driver
• A light
• Creeper
• Two towels
• Safety glasses
• Gloves
• Two wood blocks
• Magnetic bowl
• And a set of vented fog light shrouds
A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!
Music not provided by YouTube:
“Song E01” by Seth Schneider
sethds93@gmail.com
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.
17
views
Yamaha XT250 Zeta Racing Skid Plate Installation 2008-Current
Install a skid plate on your Yamaha XT250 yourself and save some money!
LINKS:
Skid Plate: https://amzn.to/3abdTt6
Penetrating Oil: https://amzn.to/3HsfAhn
Cotton Swabs: https://amzn.to/3wfzpFu
Socket Set: https://amzn.to/3gkCwn2
Thread Chaser Set: https://amzn.to/3x0AxNN
Thread Locker: https://amzn.to/3AZh9RK
Motorcycle Stands: https://amzn.to/3rv1gyA
Digital Micrometer: https://amzn.to/3IT82Em
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US
TOOLS AND SUPPLIES USED:
• Socket wrench
• Socket extension
• 8mm socket
• Cotton swabs
• Penetrating oil
• And a skid plate
A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!
Music not provided by YouTube:
“Song E01” by Seth Schneider
sethds93@gmail.com
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.
13
views
C5 Corvette Hyper Flash Harness Installation 1997-2004
Install a hyper flash wiring harness yourself and save some money!
NOTE:
The hyper flash wiring harness did not resolve the issues we had after installing the LED headlights.
LINKS:
Hyper Flash Harness: https://amzn.to/3wASYII
Electric Screwdriver: https://amzn.to/3Hoafrt
Torx bit set: https://amzn.to/34v0Dg7
Flat Head Screwdriver: https://amzn.to/3J3azft
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US
TOOLS USED:
• Electric Screwdriver
• T10 Torx
• And a flat head screwdriver
A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!
Music not provided by YouTube:
“Song E01” by Seth Schneider
sethds93@gmail.com
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.
10
views
20 Year Old Corvette - First Impressions - 2001 C5
My first impressions of a 2001 Chevrolet C5 Corvette with 81,000 miles (130,000 km).
Parts Links:
Borla Exhaust: https://amzn.to/3PzhCks
Corvette Body Kit: https://amzn.to/3wGCJIS
Lowering bolt kit: https://amzn.to/3KiHAFy
LED high and low beam kit: https://amzn.to/3Hvmbb4
Corner Marker Lenses: https://amzn.to/3wqgUyR
Rear Side Marker (LED): https://amzn.to/3hDsjT0
Tail Lights (LED): https://amzn.to/3yOKy1T
Door Handle Covers: https://amzn.to/38Cc0Fu
Spark Plugs (NGK Iridium): https://amzn.to/3Ht40CM
Spark Plug Wires: https://amzn.to/3J3plD0
Air Filter: https://amzn.to/3ATQrK8
Hood Seal: https://amzn.to/3LH7wuu
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US
A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.
3
views
C5 Corvette Borla Base Cat-Back Exhaust System Sound
2001 Chevrolet Corvette with Borla Base Cat-Back Exhaust System - Sounds / Audio Sample
LINKS:
Borla Base Cat-Back Exhaust System: https://amzn.to/3PzhCks
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US
A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
21
views
Honda CBR 500R / CB 500X / CB 500F 4,000 Mile / 6,000 km Service 2013-2018
Do a 4,000 mile inspection on your Honda cbr500r, cb500f, or cb500x yourself and save some money!
NOTE:
Lubing your clutch cable annually will help it feel smooth and last a long time.
LINKS:
Fairings and Fuel Tank Video: https://www.youtube.com/watch?v=fBHAmn-71iQ
Chain Adjustment Video: https://www.youtube.com/watch?v=vHV0Jl2A3xs
Chain Cleaning Video: https://www.youtube.com/watch?v=qUCRzmAhR04
Brake Fluid Flush Video: https://www.youtube.com/watch?v=OlIXkz2yvB4
Torque Wrench: https://amzn.to/3ooqxJl
Needle nose pliers: https://amzn.to/3L7jvCv
Bent nose pliers: https://amzn.to/3J0YffT
Hex wrench set: https://amzn.to/32U647P
Hex socket set: https://amzn.to/3unV5yW
Ratcheting wrench set: https://amzn.to/32SN2hY
Wrench set: https://amzn.to/32T9pE2
Cable luber: https://amzn.to/3sAzDoy
Measuring tape: https://amzn.to/3uktpuE
Motorcycle stands: https://amzn.to/3rv1gyA
Chain lube: https://amzn.to/3L6WejZ
Gloves: https://amzn.to/3IUg00c
Q-Tips: https://amzn.to/3wfzpFu
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?locale.x=en_US
TOOLS USED:
• Torque Wrench
• Needle nose pliers
• Bent nose pliers
• 5mm hex
• 8mm hex
• 10mm ratcheting wrench
• 12mm wrench
• 14mm wrench
• Cable luber
• Measuring tape
For this inspection I also needed:
• A set of stands
• Chain lube
• Gloves
• And a Q-tip
A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!
Music not provided by YouTube:
“Song E01” by Seth Schneider
sethds93@gmail.com
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
**Disclaimer**
Due to the litigious world we live in, I have to include this statement:
I cannot guarantee against improper use or unauthorized modifications of this information. The creator of this content assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not the creator of this content.
53
views
4K Motorcycle Ride - Honda CBR500R with Yoshimura Carbon Exhaust
Filmed on GoPro Hero 10 Black. Audio captured with two Tascam DR-05 recorders. Bike is a 2016 Honda CBR 500r with Yoshimura slip on exhaust - no baffle.
LINKS:
Yoshimura R77: https://amzn.to/3FLMZ6P
Want to support my channel?
Become a patron! https://www.patreon.com/EndlessMoneyPits
Or make a one-time donation via PayPal: https://paypal.me/EndlessMoneyPits?lo...
A huge thanks goes to my sole Patreon supporter, Elizabeth Y.!
**This video description contains affiliate links, which means that if you click on one of the product links and make a purchase, I'll receive a small commission at no additional cost to you. This helps support the channel and allows me to continue making videos like this.
17
views