BCM® A/T™ (Angled/Torque) Red Dot Optic Mounts
Improving on Mil-Spec rail interfaces dating back over 30 years, the BCM A/T mount delivers an unprecedented zero retention on a properly mounted red dot optic. Low profile and snag-free, BCM A/T Mounts are built with a minimal number of components and 7075T6 aluminum- delivering a stronger component with less points of failure, ready to take on dynamic and adverse settings.
With an equivalent load applied, the A/T Mount delivers approximately twice the clamping force at the picatinny rail, versus a legacy horizontal interface.
https://bravocompanymfg.com/accessories-at-mount.html
4.17K
views
BCM® Vertical Grip MLOK* Mounting and Information
Based on direct feedback from the country’s premier gunfighters, the BCM Engineering Team developed an ultra-compact and ultra-light accessory designed to improve a shooters’ interface with the weapon.
Low-profile length for increased mobility and decreased snag factor.
The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
Can be mounted in reverse angle to increase control when grabbing handguard and grip.
Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
A lightweight design at 2 ounces.
Made in the U.S.A., manufactured from high quality, impact resistant polymers.
https://bravocompanymfg.com/accessories-vert-grips-stops.html
*M-LOK® is a registered trademark of Magpul Industries Corp.
https://www.magpul.com/ip
31.7K
views
BCM® KAG Handstop 1913 Picatinny Mounting and Information
The KAG is the end result of a multi-year collaboration between BCM and Travis Haley, founder of Haley Strategic Partners and the inventor of multiple weapons manipulation enhancements in the firearms industry.
Informed by his time as a Force Recon Marine, Security Contractor and Instructor, Travis has designed a combat handstop that leverages biomechanical efficiency to give the end user more exacting control of their weapon system.
Designed to complement modern shooting grips, the Kinesthetic Angled Grip aka KAG uses a bio-mechanically efficient forward rake to create an interface for positive retention and joint limitation relief to the wrist, elbow and shoulder allowing for smooth weapons manipulations without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for the consistent and positive engagement which translate directly into improved efficiency in weapons manipulation and target to target transitions.
United States Patent 9,709,358
Made in the U.S.A., manufactured from high quality, impact resistant polymers.
https://bravocompanymfg.com/accessories-kag.html
https://haleystrategic.com/
4.82K
views
BCM® KAG Handstop KeyMod Mounting and Information
The KAG is the end result of a multi-year collaboration between BCM and Travis Haley, founder of Haley Strategic Partners and the inventor of multiple weapons manipulation enhancements in the firearms industry.
Informed by his time as a Force Recon Marine, Security Contractor and Instructor, Travis has designed a combat handstop that leverages biomechanical efficiency to give the end user more exacting control of their weapon system.
Designed to complement modern shooting grips, the Kinesthetic Angled Grip aka KAG uses a bio-mechanically efficient forward rake to create an interface for positive retention and joint limitation relief to the wrist, elbow and shoulder allowing for smooth weapons manipulations without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for the consistent and positive engagement which translate directly into improved efficiency in weapons manipulation and target to target transitions.
United States Patent 9,709,358
Made in the U.S.A., manufactured from high quality, impact resistant polymers.
https://bravocompanymfg.com/accessories-kag.html
https://haleystrategic.com/
2.55K
views
BCM® Vertical Grip KeyMod Mounting and Information
Taking advantage of the versatility offered in the KeyMod™ standardized system, this new Mod 3 Vertical Grip features a patented snag free internal mounting system. Based on direct feedback from the country’s premier gunfighters, the BCM Engineering Team developed an ultra-compact and ultra-light accessory designed to improve a shooters’ interface with the weapon.
Low-profile length for increased mobility and decreased "snag" factor.
The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
Can be mounted in reverse angle to increase control when grabbing handguard and grip.
Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
United States Patent 9,709,358
Made in the U.S.A., manufactured from high quality, impact resistant polymers.
https://bravocompanymfg.com/accessories-vert-grips-stops.html
6.05K
views
BCM® Vertical Grip 1913 Picatinny Mounting and Information
The BCM 1913 Mod 3 Vertical Grip features a patented BCM Direct Mount Picatinny 1913 Interface System that not only secures to the mounting surface, but spreads the energy and force throughout the accessory.
Low-profile length for increased mobility and decreased "snag" factor.
The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
Can be mounted in reverse angle to increase control when grabbing handguard and grip.
Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
United States Patent 9,709,358
Made in the U.S.A., manufactured from high quality, impact resistant polymers.
https://bravocompanymfg.com/accessories-vert-grips-stops.html
6.43K
views