Simple Shop Hack
Simple Hack To Help Plane 8 Quarter 9 Foot Lumber In A Small Shop. we use our 6 foot level to act as a rail for planeing 9 foot lumber, it helps eliminate snipe .
it just happens to be the exact height we needed when we clamped it to our work table. so no more holding it with our hands and hoping we can keep it level enough , and some boards that size get pretty heavy.
122
views
Getting OUR Walnut Order With The Kabota SSV 75
Went to our buddies to grab our Walnut order that got delivered to his shop , he grabbed it with his Kubota SSV 75 skid steer , man Lumber is getting expensive. this load cost just over $1800 . it's just over 100 board feet.
92
views
Celtic Shield V-CARVE On The Shapeoko 3 XXL
Hello Everyone, in this video, we are doing a Celtic style shield engrave , we are using 3/4 inch ply painted black. this is going to be a shop wall hanger , we recently did maintenance to our cnc and flattened the waste board , so this was to see if the V-Carve was nice and even , and it was , finally 😀
Machine - Shapeoko 3 XXL
Thanks for watching
Ways to support the channel
Check out our Online store
https://www.thealexanderbroswoodworking.com/our-store
Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E
78
views
We Think We Dialed In The Settings For This CNC Engrave
Hello everyone , Matt Here from the Alexander Bros Woodworking , In todays video I am Doing what is hopefully the last test engrave for this sign we are doing for a local motorcycle club . The other tests we did were way too deep and looked like garbage .
We are using 3/4 maple plywood painted black so we can see the contrast from the carve . We are using a 1/8th bit to pocket out the majority of the material and follow up with a 1/4 60 degree Vee bit for the rest .
Machine - Shapeoko 3 XXL
Thanks for watching
Ways to support the channel
Check out our Online store
https://www.thealexanderbroswoodworking.com/our-store
Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E
110
views
Trying To Dial In The Settings (short)
We are trying to dial in the depth for this local motorcycle clubs sign .
we are having an issue where the depth we set in the programming is different from the outcome , and we think the CNC is not running flat , as we know the bed waste board is flat , going to have to do more adjustment's I think , thanks for watching
138
views
Local Motorcycle Club Sign in the works #woodworking #viral #motorcycle #harleydavidson
Check out our Online store https://www.thealexanderbroswoodworking.com/our-store
Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E
93
views
Copper and Walnut Always Looks Great Together #shorts #shortsvideo #woodworking
Copper and Walnut Always Looks Great Together #shorts #shortsvideo #woodworking
54
views
Lots Of Micro Cracks in this Walnut
added some copper colored epoxy to this slab to fill in holes and cracks , and man there was lots of micro cracks.
52
views
PART 2 Of We CNC Carved A New Sign For The Shop
This is part 2 of the shop sign . here we clear it , to seal it before painting it black , then sand it off #woodworking #wood #sandingmachine
Ways to support the channel
Check out our Online store
https://www.thealexanderbroswoodworking.com/our-store
Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E
51
views
We CNC Carved A New Sign For The Shop
#woodworking #wood #cnc
Hello everyone, in this video we are carving a new sign for our shop , we are using our Shapeoko 3 XXL .
The wood we chose was Cherry as we find it carves very nice . the carve in total was 3.5 hours.
this is a edited version of the livestream
Ways to support the channel
Check out our Online store
https://www.thealexanderbroswoodworking.com/our-store
Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E
66
views
2
comments
Making End Grain Cutting Boards All Parts
We have a lot of scrap wood we had glued up into cutting board blanks that were too thin or too small , so we decided to cut them up and make end grain cutting boards.
Check out our Online store https://www.thealexanderbroswoodworking.com/our-store
Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E
64
views
OMEC 650A dovetail machine demo
While visiting our buddies woodshop he showed us his new toy. The OMEC 650A Dovetail Machine, and boy oh boy it is fast and so much easier.
Check out our Online store https://www.thealexanderbroswoodworking.com/our-store
Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E
30
views
Sanding A Maple Burl Cookie Slab With A Felder FW 950 Wide Belt Sander
#woodworking
We visited our buddy Nathan today ,we sanded up some slabs using his Felder FW 950 Wide Belt Sander. the cookie slab is the one we flattened on our CNC and sanded the epoxy off , this was just to make sure it was flat for the customer ( he is doing all the finish sanding himself )
Check out our Online store
https://www.thealexanderbroswoodworking.com/our-store
Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E
26
views
Sanding Up Some Wood ( Recap Of Yesterday's Live Stream )
#woodworking #sanding #sandingwood
Hello everyone, this is a recap of yesterdays live stream we are sanding up some 2x4's and some Cedar 4x4's so we can build 2 display tables for a client
ways to support our channel more directly links
OUR STORE
https://www.thealexanderbroswoodworking.com/our-store
PayPal
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E
32
views
Slab Sanding ( Felder FW 950 Wide Belt Sander )
#woodworking
We visited our buddy Nathan today ,we sanded up some slabs using his Felder FW 950 Wide Belt Sander. The 2 slabs are a table top that we are refinishing and flattening for a client
Check out our Online store
https://www.thealexanderbroswoodworking.com/our-store
Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E
21
views
Let's Sand Some Slabs Using The Felder FW 950 Wide Belt Sander
#woodworking
We visited our buddy Nathan today ,we sanded up some slabs using his Felder FW 950 Wide Belt Sander. The 2 first slabs are a table top that we are refinishing and flattening for a client the cookie slab is the one we flattened on our CNC and sanded the epoxy off , this was just to make sure it was flat for the customer ( he is doing all the finish sanding himself )
Check out our Online store
https://www.thealexanderbroswoodworking.com/our-store
Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E
23
views
Spindle Cam On The CNC #signmaking #cnc #woodworking
In this video, we attached the Cheap GoPro style camera to the CNC Spindle Cam . This is the ⅛ end mill roughing pass for the mobile Cottage Sign. It took 1 hour for the CNC to do the Roughing Pass with this bit before we switched it to a 60⁰ V bit. The battery died, so we did not get footage of that from this angle. but the edited video is linked below from our #TikTok live. we did
thank you for watching. I hope you enjoyed it.
edited video here. https://youtu.be/09JFgGTTnlQ
#woodworking #cnc #youtube #gopro
ways to support our channel more directly links
OUR STORE
https://www.thealexanderbroswoodworking.com/our-store
PayPal
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E
58
views
Mobile Cottage Sign On The Cnc
In this video we are making a cedar sign for a customer. they plan on displaying it at there campsite while camping
Check out our Online store https://www.thealexanderbroswoodworking.com/our-store
Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E
32
views
It Took 2.5 Hours To Sand This .
Decided to sand the epoxy off bottom of this burl cookie slab . The cnc worked good on the top but the chips made a mess and got on the rails and stopped the cnc from moving . we don't feel like messing up the cnc and replacing the drive belts , so we felt this was safer
Check out our Online store https://www.thealexanderbroswoodworking.com/our-store
Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E
23
views
Carving A Retirement Plaque with chalk board
In this video we are using our Shapeoko 3 XXL to carve a retirement plaque for a client, made from cherry and has a chalk board and shelf for chalk and hold 3 darts for when they play a game of darts. photo at end of video
Check out our Online store https://www.thealexanderbroswoodworking.com/our-store
Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E
34
views
Flattening A Cookie Manually On The CNC
In This video we are flattening a cookie slab with epoxy . We are doing it manually with our shapeoko 3 XXL . We chose to do it manually because we figured it would be faster then making a G-code file
Check out our Online store https://www.thealexanderbroswoodworking.com/our-store
Support the channel
https://www.paypal.com/donate/?hosted_button_id=RGAHQ9VLYB49E
28
views