Larson Electronics - American Made and Manufactured Industrial Lighting and UVC Products

https://www.larsonelectronics.com/product/298000/explosion-proof-analog-ammeter-c1d1-c2d1-20-amps-10v-600v-1ph-feed-thru The EXP-ED-AM-AC-20A-1PH-V1 from Larson Electronics is an Explosion Proof Analog Ammeter that is designed for use in hazardous locations, confined spaces and industrial facilities. This NEMA-rated unit operates on single-phase 120V AC and offers up to 2.5% accuracy during ammeter operation. Constructed of copper-free aluminum, the explosion proof device contains a 5.38" lens opening for viewing meter readings. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/285277/fused-disconnect-switch-2500-amp-208v-3ph-ac-3-pole-4-wire-3-class-l-time-delay-fuses-nema-3r The Larson Electronics MPD-DS-FS-FDS-3P-4W-208V-2500A-EF-BM-N3R-TD Power Distribution Disconnect Switch is designed for reliable, safe and convenient power distribution at industrial work sites. This fused disconnect includes three 2500-amp 208V rated Class L fuses. Designed for floor mounting installations, the bottom feed disconnect switch is protected by a NEMA 3R rated, steel enclosure with a ventilated design. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/266795/2-000-amp-disconnect-switch-fused-2-000a-600v-ac-3ph-input-output-lugs-n3r The PDU-MDS-600V.3P-2000A-3X2000A-M1 from Larson Electronics is a Disconnect Switch that is an accessory for power distribution systems. This 2,000-amp rated power distribution accessory acts as an overload breaker that will protect operators from overloading a transformer. Equipped with an open-bottom configuration, the PDU-MDS-600V.3P-2000A-3X2000A-M1 is encased in a NEMA 3R steel enclosure. The PDU-MDS-600V.3P-2000A-3X2000A-M1 AC disconnect switch is rated for 2,000 amps, features a fusible interior (fused at 2,000 amps) and a safety disconnect switch. There are four 600 MCM mechanical lugs per phase located on the input and output side, which accept 600 MCM cables. This power distribution accessory is constructed of steel and has a 3-pole 3-wire configuration along with a three-phase 600V AC voltage rating. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/291556/75-kva-pad-mount-transformer-34500v-delta-primary-208y-120-wye-n-secondary-copper-knan-bell-green The MT-PML-R7-3P-DMA-75KVA-YT-LT-DF-A6-AB-CZ-2B4-M2 Industrial Pad Mount Transformer from Larson Electronics offers powerful, reliable and efficient power distribution in indoor, outdoor and public locations. The low operating costs, low heat emissions and low cost of ownership makes this transformer ideal for a wide range of applications and businesses. An enclosed design caters to installations on concrete pads without protective fencing. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/273462/15-kva-power-distribution-480v-120-240v-1ph-3-l14-30r-3-5-15r-rs-ds1404-input The Larson Electronics MPD-CD8-NTL.30AB-SE15SZ-DH-3.L22-2.N06-1.N05-M1 temporary power distribution system converts three-phase 480V AC Delta electrical current into single-phase 120/240V AC. This unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power. Made in Texas The Larson Electronics MPD-CD8-NTL.30AB-SE15SZ-DH-3.L22-2.N06-1.N05-M1 temporary power distribution system converts three-phase 480V AC Delta electrical current into single-phase 120/240V AC. This unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The MPD-CD8-NTL.30AB-SE15SZ-DH-3.L22-2.N06-1.N05-M1 temporary power distribution system gives operators the ability to power their 120 volt equipment from a single system. Operation: • Primary Voltage: 3-Phase 480V AC Delta • Primary Receptacles: N/A • Transformer: 15KVA 480V to 120/240V 1PH N3R • Secondary Voltage: 1-phase 120/240V AC • Secondary Receptacles: (3) L14-30R NEMA Twist-Lock [125/250V]; (2) 5-15R NEMA DPLX GFCI [125V]; (1) 5-15R NEMA DPLX LOTO [125V] Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/283505/7w-explosion-proof-led-drop-light-trouble-light-colored-led-lamp-24v-ac-dc-50-soow-w-terminal-box The EHL-LED-7WC-50-24V from Larson Electronics is an Explosion Proof LED Drop Light / Trouble Light that can be used in Class I Divisions 1 & 2 Groups C and D hazardous environments and is ideal for general work activities in hazardous locations requiring explosion proof protection. The EHL-LED-7WC-50-24V operates on 24 V AC/DC. This 7 watt explosion proof colored LED work light from Larson Electronics produces 750 lumens of colored light and comes complete with 50 feet of explosion proof cord that is terminated in a terminal box with a 1/2" NPT hub for direct wiring. The EHL-LED-7WC-50-24V LED drop light has no ballast and the housing is constructed of non sparking aluminum which results in a very lightweight unit. This hazardous location hand lamp is Class I, Divisions 1 and 2 and Class II Divisions 1 and 2 hazardous location environment approved. This explosion proof LED drop light is ideal for hazardous work areas where a ready source of easily managed lighting is desired. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/278554/45kva-portable-distribution-skid-480v-208y-120-3ph-2-cs8269-4-l5-20r-3-5-20r-open-frame-cube The Larson Electronics MPD-CC2-TB.60AB-DE45YT-GZ-2.C02-4.L04-3.N07-M1 Power Distribution Substation converts three-phase 480 V AC electrical current to three-phase 208Y/120 V AC. This open frame power distribution unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power. The MPD-CC2-TB.60AB-DE45YT-GZ-2.C02-4.L04-3.N07-M1 temporary power distribution system gives operators the ability to power their 120 volt equipment from a single system. Operation: • Primary Voltage: 3-phase 480V AC, Delta • Primary Panel: N/A • Primary Breaker(s): (1) 60A 3P MCCB [480V] • Primary Outlet(s): N/A • Transformer: 45KVA 480V to 208Y/120V 3PH N3R • Secondary Voltage: 3-phase 208Y/120V AC Wye • Secondary Panel: 208Y/120V 3PH 125A MLO N3R • Secondary Breaker(s): (1) 100A 2P MCCB [250V]; (3) 50A 2P MCB [250V]; (10) 20A 1P MCB [125V] • Secondary Outlet(s): (2) CS8269 California Standard Twist-Lock [250V]; (4) L5-20R NEMA Twist-Lock [125V]; (3) 5-20R NEMA Simplex [125V] Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/283830/167-kva-pole-mount-distribution-transformer-19920-34500y-grounded-wye-primary-120-240v-secondary-mineral-oil-onan The MT-UPM-R8-1P-GMA-167KVA-SZ-BF-Z6-BM-CZ-2ZZ-M2 Pole Mount Distribution Transformer from Larson Electronics offers powerful, reliable and efficient power distribution in outdoor and public locations. The low operating costs, low heat emissions and low cost of ownership makes this transformer ideal for a wide range of applications and businesses. This power distribution system is designed for overhead, pole mount installations and use. Transformer Features: With a transformer rating of 167 KVA, the industrial transformer features a primary voltage of single-phase 19920/34500Y Grounded Wye (2 wire) and a secondary voltage of single-phase 120/240V (L-L-N). This pole mount transformer features porcelain high-voltage, dual bushings on the primary side and three bushings on the secondary side. Equipped with copper windings and a grain oriented steel core, this single-phase transformer consists of one coil and two core loops. Tin plated terminals on the primary and secondary side accepts copper or aluminum connections. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/287222/250-kva-pad-mount-transformer-24940y-14400-12470y-7200-grounded-wye-primary-240-120v-secondary-mineral-oil-fluid-knan The MT-PML-R7-1P-GMF.MR-250KVA-SZ-LT-DF-Z6-BB-CZ-2B4-M2 Industrial Pad Mount Transformer from Larson Electronics offers powerful, reliable, and efficient power distribution in indoor, outdoor, and public locations. The low operating costs, low heat emissions, and low cost of ownership makes this transformer ideal for a wide range of applications and businesses. An enclosed design caters to installations on concrete pads without protective fencing. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/150995/45-portable-solar-light-tower-7-5-trailer-12v-200ah-battery-bank-1-junction-box Made in Texas The SPLT-.53K-LM45-2XN3B-PW-TLR7 from Larson Electronics is a Solar Powered LED Light Tower that provides a safe and effective way for operators to quickly deploy cameras, security devices, and other equipment to elevations up to 45 feet. This solar light plant features a telescoping light tower that folds over for easy transportation, features a rotating boom that allows for 360° of rotation, and a removable mast head for storage when not in use. This low-noise unit features two 265 watt solar panels and a 400 aH capacity battery bank with 200aH being usable. A waterproof electronics enclosure can be found at the base of the mast. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/149995/27w-handheld-magnetic-led-light-2160-lumens-aluminum-body-inverted-pistol-grip-ip67 The HML-27R-LED from Larson Electronics is a Handheld Magnetic LED Light that offers high light output in a compact form factor. This unit produces 2,160 lumens of light output with very low amp draw and compatibility with 10-30V. The handheld LED lamp features a 100 lbs rated magnet for mounting and an inverted pistol grip handle for robust control of the light head. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/144648/70w-hazardous-area-led-light-c1d2-c2d1-7-111-lms-globe-guard-nema-4x The EPLC2-HHB-GLB-70W-LED Hazardous Area LED Light Fixture from Larson Electronics offers operators a powerful and energy efficient alternative to traditional hazardous location lamps. This 45-watt LED hazardous area light is designed for installation in locations where flammable gases, vapors and liquids, combustible dusts, and/or ignitable fibers and flyings exist or have the potential to exist. Weatherproof and listed for marine use, this LED light is an ideal choice for a range of industrial and hazardous applications, as well as takes on a traditional globe/guard fixture design. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/292295/225-kva-pad-mount-transformer-20780y-12000-grounded-wye-primary-208y-120-wye-n-secondary-copper-onan-bell-green The MT-PML-R7-3P-GMK-225KVA-YT-RT-DF-A6-BM-CZ-1B2-M1 Industrial Pad Mount Transformer from Larson Electronics offers powerful, reliable and efficient power distribution in indoor, outdoor and public locations. The low operating costs, low heat emissions and low cost of ownership makes this transformer ideal for a wide range of applications and businesses. An enclosed design caters to installations on concrete pads without protective fencing. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/146590/70w-explosion-proof-dock-light-120-277v-to-low-voltage-dc-inline-c1d1-transformer-26-arm Made in the USA The EPL-DL-70LED-24-XLV-C1D1-EPP Explosion Proof Dock Light is UL Listed Class I & II, Divisions 1 & 2 and is rated for use in wet and marine environments. The 26" extended swing arm made of 1.5" square steel tube and metal halide lamp used with this unit provides operators with excellent power and efficiency coupled with high versatility and ease of use. The EPL-DL-70LED-24-XLV-C1D1-EPP is equipped with a C1D1 explosion proof enclosure for the inline transformer and comes outfitted with an explosion proof cord cap. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/293622/fused-disconnect-switch-600-amp-600v-3ph-ac-3-pole-3-wire-3-class-j-time-delay-fuses-wall-mount-nema-3r The MPD-DS-WML-FDS-3P-3W-600V-600A-DF-BM-N3R-TD from Larson Electronics is a Power Distribution Fused Disconnect Switch that is designed for reliable, safe, and convenient power distribution at industrial work sites. Designed for wall mounting installations, the disconnect switch is protected by three 600A class J time delay fuses and a NEMA 3R rated, steel enclosure with a ventilated design. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/291196/15-kva-pole-mount-distribution-transformer-4160-7200v-primary-120-240v-secondary-304-ss-cu-bio-oil-5-position-tc The MT-UPM-R7-1P-GNC-15KVA-SZ-AE-A6-BB-CS-BZZ-M1 Pole Mount Distribution Transformer from Larson Electronics offers powerful, reliable and efficient power distribution in outdoor and public locations. The low operating costs, low heat emissions and low cost of ownership makes this transformer ideal for a wide range of applications and businesses. This power distribution system is designed for overhead, pole mount installations and use. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/291922/600w-portable-solar-equipment-tower-30-mast-10-trailer-24v-500ah-battery-bank-1-job-box-24v-to-120v-inverter-w-4-5-15r-receptacles The SPLT-.6K-LM30-500AH-24V-4X120V-TLR10 from Larson Electronics is a Portable Solar Equipment Tower that offers a reliable and effective way for operators to quickly deploy lights, security cameras and other equipment to elevations of up to thirty feet. This portable solar unit features a removable mast head for storing mounted equipment when not in use, two 300-watt solar panels, a 500aH capacity battery bank and a 24V to 120V 6000 watt inverter with four 5-15R receptacles. All system components are secured to a 10' trailer. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/152304/40w-explosion-proof-led-light-fixture-c1d1-c2d1-2x2-lay-in-troffer-atex-iso-rated The Larson Electronics HALD-24-1X40CPR-LED-V2 Explosion Proof LED Fixture provides operators with a powerful and energy efficient lighting solution for clean rooms and pharmacutical facilities. The 40-watt LED fixture offers up to 4,000 lumens of white light during use. Operators can mount the ATEX-rated LED lamp in recessed panel mounting confugrations. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/287539/fused-disconnect-switch-600v-ac-rated-3-pole-3-400a-fast-acting-fuses-wall-mount-n3r The MPD-DS-WM-FDS-3P-3W-600V-400A-DF-BM-N3R-FA from Larson Electronics is a Power Distribution Disconnect Switch that is designed for reliable, safe, and convenient power distribution at industrial work sites. This fused disconnect includes three 400-amp 600V rated fast acting fuses. Designed for wall mounting installations, the disconnect switch is protected by a NEMA 3R rated, steel enclosure with a ventilated design. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/47296/led-light-emitter-24-3-watt-leds-green-illumination-4230-lumens-575-l-x-70-w-spot-beam The Larson Electronics LEDLB-24-GREEN LED Light Bar offers high light output in a light weight, durable, low profile housing combined with versatile mounting and power options. This IP67 rated LED light bar is waterproof to one meter and produces 4,320 lumens while drawing only 72 watts of power @6 amps from a 12 volt electrical system. This light can run on any voltage from 9 to 42 volts and is configured to produce green colored light only. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/search/result?w=spider%20box 50 YEARS of LARSON ELECTRONICS! Check our Portable Power Distribution SPIDER BOXES! Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/282270/100-kva-pole-mount-distribution-transformer-7968-13800y-grounded-wye-primary-277-480v-secondary-mineral-oil-onan The MT-UPM-R7-1P-GMP-100KVA-SLR-BF-Z6-BM-CZ-2ZZ-M1 Pole Mount Distribution Transformer from Larson Electronics offers powerful, reliable and efficient power distribution in outdoor and public locations. The low operating costs, low heat emissions and low cost of ownership makes this transformer ideal for a wide range of applications and businesses. This power distribution system is designed for overhead, pole mount installations and use. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/285067/fused-disconnect-switch-3000-amp-600v-3ph-ac-3-pole-4-wire-3-class-l-time-delay-fuses-nema-3r The Larson Electronics MPD-DS-FS-FDS-3P-4W-600V-3000A-EF-BM-N3R-TD Power Distribution Disconnect Switch is designed for reliable, safe and convenient power distribution at industrial work sites. This fused disconnect includes three 3000-amp 600V rated Class L fuses. Designed for floor mounting installations, the bottom feed disconnect switch is protected by a NEMA 3R rated, steel enclosure with a ventilated design. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com Happy Holidays from Larson Electronics! https://www.larsonelectronics.com INDUSTRIAL and TEXAS MADE Power & Lighting: LED Lights: Disinfection Lights Exit Lights Explosion Proof Lights Strobe Lights Goosneck Lights Hazardous Location Lights Mast & Elevated Lights Mining Lights Remote Control Lights Safety Lights Street Lights String Lights Traffic Lights UVC Lights Warning Lights Power Distribution: Pad Mount Transformers Pole Mount Transformers Power Distribution Carts Rack Mount Power Distribution Transformers Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/294200/3-mva-pad-mount-transformer-20780v-delta-primary-480y-277-wye-secondary-knan-bell-green The MT-PML-R7-3P-DMK-3MVA-YE-LT-DF-A6-BB-CZ-2B6-M1 from Larson Electronics is an Industrial Pad Mount Transformer that offers powerful, reliable, and efficient power distribution in indoor, outdoor, and public locations. The low operating costs, low heat emissions, and low cost of ownership makes this transformer ideal for a wide range of applications and businesses. An enclosed design caters to installations on concrete pads without protective fencing. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1