Larson Electronics - American Made and Manufactured Industrial Lighting and UVC Products

https://www.larsonelectronics.com/product/287066/600a-power-distribution-main-breaker-panelboard-480y-277-3-phase-5-125a-breakers-wall-mount-grey-nema-3r The Larson Electronics MPD-PB-RA-MB-YE-DF-24-TF-N3R-5.T33 Power Distribution Main Breaker Panelboard facilitates electrical and power connections in industrial sites. This unit provides operators the ability to safely tap into and distribute three phase 480Y/277 AC power from a variety of sources including generators and direct grid power. Panelboard: The MPD-PB-RA-MB-YE-DF-24-TF-N3R-5.T33 power distribution unit gives operators the ability to power their 480Y/277 volt equipment from a single system. On the primary side, operators connect three-phase 480Y/277 volt line-in power using a customer-provided cord. This panelboard distributes power from an electrical feed to various branch circuits. Models with breakers offer circuit protection. All branch breakers are compatible with Larson Electronics 150AF size branch breakers. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/286696/37-5-kva-pad-mount-transformer-12470y-7200-24940y-14400-grounded-wye-primary-240-120v-secondary-mineral-oil-onan The MT-PML-R9-1P-GMF.MR-37.5KVA-SZ-LT-DF-Z6-BM-CZ-1BZ-M2 Industrial Pad Mount Transformer from Larson Electronics offers powerful, reliable and efficient power distribution in indoor, outdoor and public locations. The low operating costs, low heat emissions and low cost of ownership makes this transformer ideal for a wide range of applications and businesses. An enclosed design caters to installations on concrete pads without protective fencing. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/285249/fused-disconnect-switch-1200-amp-480v-3ph-ac-3-pole-4-wire-3-class-l-time-delay-fuses-nema-3r The Larson Electronics MPD-DS-FS-FDS-3P-4W-480V-1200A-EF-BM-N3R-TD Power Distribution Disconnect Switch is designed for reliable, safe and convenient power distribution at industrial work sites. This fused disconnect includes three 1200-amp 480V rated Class L fuses. Designed for floor mounting installations, the bottom feed disconnect switch is protected by a NEMA 3R rated, steel enclosure with a ventilated design. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/category/154/explosion-proof-lights Larson Electronics is the leader in building Industrial Explosion Proof LED Lighting for Hazardous Locations. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/285909/800a-power-panelboard-3ph-main-breaker-panel-30-circuit-480y-277-9-90a-3p-breakers-nema-3r-wall-mount MADE IN TEXAS at Larson Electronics! The MPD-PB-RA-MB-YE-C-J-30-BF-N3R-9.T23 from Larson Electronics is a Power Distribution Main Breaker Panelboard that facilitates electrical and power connections in industrial sites. This unit provides operators the ability to safely tap into and distribute three phase 480Y/277 AC power from a variety of sources including generators and direct grid power. Panelboard: The MPD-PB-RA-MB-YE-C-J-30-BF-N3R-9.T23 power distribution unit gives operators the ability to power their 480Y/277 volt equipment from a single system. On the primary side, operators connect three-phase 480Y/277 volt line-in power using a customer-provided cord. This panelboard distributes power from an electrical feed to various branch circuits. Models with breakers offer circuit protection. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/153718/50w-cfl-drop-light-w-inline-ballast-4300-lumens-120v-ac-50-16-3-cord The FTL-3-50W-CFL-50 from Larson Electronics is a compact fluorescent drop light that is designed for heavy-duty applications in industrial facilities. This luminary emits 4300 lumens of white light for robust illumination. This portable drop light has an inline ballast and operates on 120V Padded end caps offer impact resistance, while a sturdy hook expands hands-free mounting options for operators in the work site. The FTL-3-50W-CFL-50 is a compact drop light that is suitable for handheld illumination in industrial facilities. This 50-watt unit provides 4300 lumens of white light and operates on 120V @ 60Hz, drawing just .45 amps, and features an inline ballast. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/70013/explosion-proof-70-watt-led-wall-pack-down-light-6000-lumens-c1d1-c1d2 The Larson Electronics EPL-WPLED-70W-DL-B wall pack LED down light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures. This Class 1 Division 1 & 2, Class 2 Division 1 & 2 explosion proof light fixture provides 6,000 lumens of high quality light while drawing only 70 watts. It is available in 360° and 180° beam spreads. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. A special heat dissipating design in conjunction with advanced LED driver technology helps this fixture achieve an excellent 100,000 hour rated lifespan with 70% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/287273/400-amp-enclosed-circuit-breaker-disconnect-480v-ac-3-pole-35-kaic-thru-door-handle-wall-mount-nema-3r The MPD-DS-WML-CB-3P-3W-480V-400A-35K-DF-BM-N3R from Larson Electronics is an Enclosed Circuit Breaker Disconnect w/ Through Door Rotary Handle that is designed for reliable, safe, and convenient overload and short circuit protection at industrial work sites. Designed for wall mounting installations, the enclosed circuit breaker is protected by a NEMA 3R rated, steel enclosure. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/287949/750-kva-pad-mount-transformer-12470v-delta-primary-480y-277-wye-n-secondary-copper-knan-bell-green-shielded The MT-PML-K4-3P-DMR-750KVA-YE-LT-DF-A6-BB-CZ-2B6-M3 Industrial Pad Mount Transformer from Larson Electronics offers powerful, reliable, and efficient power distribution in indoor, outdoor, and public locations. The low operating costs, low heat emissions, and low cost of ownership makes this transformer ideal for a wide range of applications and businesses. An enclosed design caters to installations on concrete pads without protective fencing. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/search/result?w=tripod%20lights Larson Electronics THANKS YOU for 50 Years of serving your lighting needs! Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/287067/600a-power-distribution-panelboard-main-breaker-panel-480y-277-4-125a-breakers-nema-3r-wall-mount? MADE IN TEXAS: The Larson Electronics MPD-PB-RA-MB-YE-DF-24-TF-N3R-4.T33 Power Distribution Main Breaker Panelboard facilitates electrical and power connections in industrial sites. This unit provides operators the ability to safely tap into and distribute three phase 480Y/277 AC power from a variety of sources including generators and direct grid power. Panelboard: The MPD-PB-RA-MB-YE-DF-24-TF-N3R-4.T33 power distribution unit gives operators the ability to power their 480Y/277 volt equipment from a single system. On the primary side, operators connect three-phase 480Y/277 volt line-in power using a customer-provided cord. This panelboard distributes power from an electrical feed to various branch circuits. Models with breakers offer circuit protection. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/category/12910/liquid-filled-distribution-transformers? Pad Mount Transformers - Over 500 Units Per Month Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/69021/84w-hazardous-location-light-fixture-non-metallic-3-led-lamps-2nd-gen-corrosion-resistant-marine-application-c1d2-c2d2 The HALP-48-3L-LED-G2 from Larson Electronics is a Hazardous Area LED Light Fixture that is U.S./Canada approved Class I Division 2 Groups A, B, C and D and is specifically designed to handle the rigors of wet and corrosive marine environments. This hazardous location LED light has a T4 temperature rating and carries a United States Coast Guard approval, making it ideal for applications such as oil rigs, ships, offshore applications, petrochemical, manufacturing, chemical storage, and water treatment centers. This four foot long, three lamp LED fixture is ideal for operators seeking a top quality hazardous location light that will reduce operating costs, improve lighting quality, and reduce downtime incurred from frequent servicing intervals. The HALP-48-3L-LED-G2 hazardous area LED light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This Class I Division 2 rated fixture is constructed of non-corrosive materials including a polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing, and an impact resistant acrylic diffuser. Corrosion resistant plastic latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com Larson Electronics is celebrating 50 YEARS of supplying your power and lighting needs! Check out our massive selection of transformers! Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/search/result?w=EPLC2-MJ-15W-LED The EPLC2-MJ-15W-LED-1227-CM from Larson Electronics is an Explosion Proof LED Light Fixture that provides operators with a powerful alternative to traditional hazardous location luminaries, including metal halide, high pressure sodium, mercury vapor, halogen, CFL and incandescent lamps. This 15-watt LED unit offers 2,250 lumens, carries an IP67 waterproof rating and features an extended lifespan of 75,000+ hours. Compatible with ceiling mount installations, the mason jar style fixture is field serviceable and features pyramid light distribution that closely resembles traditional bulbs. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/285280/fused-disconnect-switch-2000-amp-208v-3ph-ac-3-pole-4-wire-3-class-l-time-delay-fuses-nema-3r The Larson Electronics MPD-DS-FS-FDS-3P-4W-208V-2000A-EF-BM-N3R-TD Power Distribution Disconnect Switch is designed for reliable, safe and convenient power distribution at industrial work sites. This fused disconnect includes three 2000-amp 208V rated Class L fuses. Designed for floor mounting installations, the bottom feed disconnect switch is protected by a NEMA 3R rated, steel enclosure with a ventilated design. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/category/154/explosion-proof-lights 50 Years of Explosion Proof LED Lighting for Hazardous Locations! Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/285026/fused-disconnect-switch-2500-amp-600v-3ph-ac-3-pole-4-wire-3-class-l-time-delay-fuses-nema-3r The Larson Electronics MPD-DS-FS-FDS-3P-4W-600V-2500A-EF-BM-N3R-TD Power Distribution Disconnect Switch is designed for reliable, safe and convenient power distribution at industrial work sites. This fused disconnect includes three 2500-amp 600V rated Class L fuses. Designed for floor mounting installations, the bottom feed disconnect switch is protected by a NEMA 3R rated, steel enclosure with a ventilated design. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/71661/25-watt-led-cabinet-light-fixture-36-light-bar-white-housing-low-voltage-strip-light The Larson Electronics GSLEDIP36-GEN-WHT is a low voltage lighting solution approved for use in wet locations. This powerful 36" long LED strip light produces 1812 lumens, operates from 12 or 24 VDC, and is suitable for a variety of applications. The GSLEDIP36-GEN-WHT is designed to provide a high output and ruggedly durable lighting solution. This low voltage light can be operated with either 12 or 24 volt DC current and includes 5 feet of connecting lead with standard two wire configuration. This light is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress. These units are configured in a 36" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/149471/112w-2x2-vapor-proof-lay-in-troffer-mount-led-fixture-120-277v-ac-ip65-waterproof The GAU-LI-24-U16-LED-WCM Vapor Proof Lay-in Troffer Mount LED Fixture offers high light output from a compact form factor, making it suitable for commercial space lighting, such as offices, gas stations, hallways and schools. This 112-watt LED light operates on 120-277V AC @ 50/60 Hz, providing versatile power connection options and the ability to run the unit with commonly encountered 120-220V AC voltages. The LED lamp features IP65 waterproof protection. The GAU-LI-24-U16-LED-WCM is a powerful, vapor proof lighting solution for general area lighting systems and commercial, indoor spaces. The 112-watt lamp runs on common 120-277V AC voltages, which can be found in most mainstream facilities and buildings. During operation, the light emits 14,952 lumens with a color temperature of 5,000K and CRI rating of 80+. For advanced protection in wet locations, this luminary is reinforced with IP65 waterproof features. The LED lamp is constructed of die cast aluminum with a powder coat finish over a chromate conversion coating. A clear flat glass lens ensures transparency during illumination. This fixture is designed for recessed mounting and requires a mounting hole to be made in the ceiling or preferred surface. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/283745/68w-explosion-proof-led-visible-white-uv-light-120-240v-ac-class-1-div-1-2-class-2-div-1-2-paint-spray-booth The EPL-48-2L-GSLED-VISUVA from Larson Electronics is an Explosion Proof LED LED Visible White / UV Light Fixture that is NRTL Listed for United States and Canada, rated for Class I Divisions 1 & 2, Class II Divisions 1 & 2, Paint Spray Booth approved, and is NRTL Certified to UL 1598A Wet Locations. This fixture can provide visible white light, UV light, or a combo of both at the same time. It uses advanced LED light technology to produce both visible white light and ultraviolet light and is T6 rated for hazardous locations where UV lamps are used in paint and adhesive curing, food inspection, or for non-destructive testing. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/search/result?w=Explosion%20Proof%20Traffic%20Signal%20Lights%20EPL-TL THANK YOU for 50 Years!!! Check Out Our LED Traffic Signal Stack Lights Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/47225/explosion-proof-paint-spray-booth-led-lighting-2-foot-2-lamp-fixture-class-1-div-1 The Larson Electronics EPL-24-2L-LED Explosion Proof LED Light Fixture is NRTL Listed for United States and Canada Class 1 Division 1 & 2 and Class 2 Division 1 and 2 for areas where flammable chemical/petrochemical vapors exist or have the potential to exist. This explosion proof LED light has a T6 temperature rating and carries a paint spray booth light certification, making it ideal for applications such as paint booths, oil rigs, offshore applications, petrochemical, manufacturing, chemical storage, water treatment centers, and food processing plants. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/282086/50-kva-pad-mount-transformer-12470y-7200-grounded-wye-primary-240-120v-secondary-mineral-oil-fluid-onan The MT-PML-R7-1P-GMR-50KVA-SZ-LT-DF-A6-BM-CZ-2B4-M1 from Larson Electronics is an Industrial Pad Mount Transformer that offers powerful, reliable, and efficient power distribution in indoor, outdoor, and public locations. The low operating costs, low heat emissions, and low cost of ownership makes this transformer ideal for a wide range of applications and businesses. An enclosed design caters to installations on concrete pads without protective fencing. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1

https://www.larsonelectronics.com/product/106166/185-watt-hazardous-location-led-light-wheelbarrow-cart-c1d2-atex-100-foot-cord-w-exp-plug The Larson Electronics HAL-16C-185LED-CPR-100 hazardous location LED light cart provide operators with a powerful and energy efficient alternative to other hazardous area luminaries such as high pressure sodium (HPS), metal halide (MH), and halogen lights. LED technology and a sturdy design make this light perfect for a wide variety of illumination needs. The durable wheelbarrow cart design can be adjusted for angle and provides a sturdy and rugged stand for portable illumination, temporary hazardous area lighting, and other hazardous location lighting needs. This Class I Division 2 explosion proof LED portable light tower provides 18,500 lumens of lighting power while drawing 185W. The fixture on this hazardous location wheelbarrow cart LED light stand is built from durable die cast aluminum with a tempered glass lens while the frame itself is made from rugged aluminum with a powder coated blue finish. This hazardous location LED light stand is rated for 100,000+ hours of lamp life and is adjustable to the desired angle. The wheelbarrow cart has the ability to fit through standard sized manhole covers for even more versatility in work site deployment. The HAL-16C-185LED-CPR-100 is also a great option when upgrading lighting from older and higher maintenance cost explosion proof lighting. Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1