C-More Micro HMI First Program Part 2
Previously we put our first program (Video) into the C-More Micro HMI Panel using the C-More Micro programming software. The Do-More Designer Simulator was used with a modified Start Stop Jog Circuit so we can use our HMI screen to control the output as well as the inputs on the PLC. This communication was done via Ethernet with the Modbus TCP protocol.
We will now look at PLC to Panel and Panel to PLC communications. This will allow us to control the screen page number, beeper, and backlight of the panel from the PLC. We will also get notifications of the same as well as key press information from the HMI panel. Let’s get started.
More information can be obtained on our website. This includes all of the links mentioned in this video.
https://accautomation.ca/c-more-micro-hmi-first-program-part-2
Previously we have discussed the following in our C-More Micro HMI Panel:
System Hardware
http://accautomation.ca/c-more-micro-hmi-system-hardware
Unboxing and Review Video
https://youtu.be/_uCcALMqYlM
Installing the Software
http://accautomation.ca/c-more-micro-hmi-installing-the-software
Installing the Software Video
https://youtu.be/BIGrOvxlDTI
- Update Automation Direct Software C More Micro Software Video
https://youtu.be/MNjTpirZs1s
System Setup Screens
http://accautomation.ca/c-more-micro-hmi-system-setup-screens
System Setup Screens Video
https://youtu.be/KolqJkKKhaA
First Program
http://accautomation.ca/c-more-micro-hmi-first-program
First Program Video
https://youtu.be/FsUe-b3JSns
There are several reasons that we are using the EA3-T4CL C-More Micro Panel. Here are a few:
• Touch screen display
• Free downloadable programming software
• 482 x 272-pixel display (WQVGA) with up to 40 lines by 80 characters of text and graphics
• 32K colors
• 14MB memory
• Built-in USB type Micro-B programming port
• Built-in RJ45 Ethernet Port
• Built-in 15-pin serial communications port
• Built-in RJ12 serial communications port
• Built-in Alarm Control setup that activates beep, back-light flash, customized alarm banner, and red LED blinking
• 0 to 50 °C (32 to 122 °F) operating temperature range (IEC 60068-2-14)
• NEMA 4/4X, IP65 compliant when mounted correctly, indoor use only
• UL, cUL & CE agency approvals
• 2-year warranty from date of purchase
-
4:50:16
Akademiks
8 hours agoKendrick Lamar & Friends 'Pop Out' Event Recap --- What's next for Drake?
59.7K17 -
1:38:24
Havoc
10 hours agoRemembering Prodigy
54.8K35 -
4:29:54
Alex Zedra
8 hours agoLIVE! Playing Chained Together Again :D
30.2K8 -
17:26
Guns & Gadgets 2nd Amendment News
21 hours agoYouTube Questioned By GOA & Congress Over Firearms Content Policy Changes
40.2K27 -
36:36
Andy Frisella
19 hours agoThe Mindset Shift That Transformed My Path to Success - Ep 729 Q&AF
31K7 -
1:53:34
Kim Iversen
11 hours agoEXPOSED: Pentagon’s Secret Anti-Vax Campaign | Establishment Starts To Finally Ask “Are We Baddies?”
88.6K188 -
1:53:49
Melonie Mac
10 hours agoGo Boom Live Ep 9!
51K12 -
1:22:22
Precision Rifle Network
18 hours agoGuns & Grub S2E9 - Rex Shoots A Match
36.6K2 -
1:25:41
Break The Cycle w/ Joshua Smith
9 hours agoBreak The Cycle Ep: 241 Trump isn't going to jail w/ Harrison Wells
33.8K1 -
1:55:59
Glenn Greenwald
12 hours agoAIPAC's Singular Ability to Remove and Influence Members of Congress; Senator Rand Paul On More COVID Cover-Ups; PLUS: Media Denies Biden's Decline | SYSTEM UPDATE #286
91K100