C-More Micro HMI System Setup Screens

2 years ago
3

We will now look at the system setup screens on the C-more micro. The C-more Micro HMI Panels from Automation Direct include a series of built-in Systems Setup Screens. They are split into three categories; Information, Setting, and Test Menu.
Information – Under the information menu we will find the panel model number, available memory and usage, the protocol being used by the panel, and the version information of the firmware and boot loader.
Setting – Under the setting menu we can adjust the brightness of the display, enable or disable the internal beeper, calibrate the touch panel, clear the user memory, reset the unit to factory defaults and set the loading screen hourglass icon delay or disable the display.
Test Menu – The test menu includes communication tests of the serial ports (loopback test), communication test to the PLC, test operation of the panel’s beeper, and test of the touch panel surface.
We will be reviewing these system screens of the C-More Micro HMI Panel. Let’s get started.

More information can be obtained on our website. This includes all of the links mentioned in this video.
http://accautomation.ca/c-more-micro-hmi-system-setup-screens

Previously we have discussed the following in our C-More Micro HMI Panel:
System Hardware
http://accautomation.ca/c-more-micro-hmi-system-hardware
Unboxing and Review Video
https://youtu.be/_uCcALMqYlM
Installing the Software
http://accautomation.ca/c-more-micro-hmi-installing-the-software
Installing the Software Video
https://youtu.be/BIGrOvxlDTI
- Update Automation Direct Software C More Micro Software Video
https://youtu.be/MNjTpirZs1s

There are several reasons that we are using the EA3-T4CL C-More Micro Panel.Here are a few:
• Touch screen display
• Free downloadable programming software
• 482 x 272 pixel display (WQVGA) with up to 40 lines by 80 characters of text and graphics
• 32K colours
• 14MB memory
• Built-in USB type Micro-B programming port
• Built-in RJ45 Ethernet Port
• Built-in 15-pin serial communications port
• Built-in RJ12 serial communications port
• Built-in Alarm Control setup that activates beep, back-light flash, customized alarm banner, and red LED blinking
• 0 to 50 °C (32 to 122 °F) operating temperature range (IEC 60068-2-14)
• NEMA 4/4X, IP65 compliant when mounted correctly, indoor use only
• UL, cUL & CE agency approvals
• 2-year warranty from date of purchase

http://www.accautomation.ca

Loading comments...