How to Operate the Solar LED Light Tower with Generator, Timer and Day/Night Sensor
The Larson Electronics SPLT-.53K-LM30-4X60LTL-ISDG-AT.DNS-TLR14 Solar Light Tower provides a safe and effective way for operators to quickly deploy 400 watts of intense LED illumination to elevations up to thirty feet. This solar light plant features a telescoping light tower that folds over for easy transportation, features a rotating boom that allows for 360° of rotation, and a removable mast head for storing the four LED light fixtures when not in use. Equipped with a 4kW backup diesel generator, the unit features two, 265-watt solar panels and a 200-amp capacity battery bank. The entire assembly is mounted onto a 14` single axle trailer, allowing operators to transport this solar light tower from location to location.
Solar Powered Light Tower: This solar light tower includes two solar panels, solar charging system, battery bank, backup diesel generator, four LED lamps with auto timer/sensor and a manual crank-up mast mounted on a 14' trailer with outriggers. This 0.53KW solar generator system replenishes amp hours of usable battery capacity per day, assuming 5.5 hours of peak charging sunlight. This system delivers 24 volts for lighting mounted atop the 30` telescoping light mast.
Light Mast: This telescoping five stage steel light mast from Larson Electronics’ is designed to allow operators to quickly and safely deploy the four LED light heads in locations where this equipment must be elevated to heights up to 30` for effective coverage. This light boom can be extended to 30` above the trailer floor for maximum area coverage, and collapsed to 13.5` for applications where a smaller footprint is required. The tower is constructed of square steel tubing with a base section 6.6` in length and 6" by 6" by 3/16" thick, lower section 6.78` in length and 5" by 5" by 3/16" thick, middle section 6.93` in length and 4" by 4" by 1/8" thick, upper section 7.08` in length and 3" by 3" by 1/8" thick, and top section 7.58` in length and 2" by 2" by 1/8" thick. Each section has a 1`+ overlap. The mast is extended to its full height using an included 1,000lb rated hand winch with 3/16" galvanized steel cable.
Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1
-
1:43
Larson Electronics - American Made and Manufactured Industrial Lighting and UVC Products
2 months agoFused Disconnect Switch, 2500 Amp, 208V 3 Phase
15 -
LIVE
RiceGum
5 hours agoLIVE CLICK HERE ! W RUMBLE W CHAT
2,607 watching -
45:37
Kimberly Guilfoyle
2 days agoThe Swamp’s Ukraine Sellout, Plus Biden’s War on Red States, Live with Jeffrey Clark and Patrick Morrisey | Ep. 119
86.3K101 -
5:02:24
Alex Zedra
6 hours agoLIVE! Raffling off an M249 SAW | Just Chatting + Games later
31.3K5 -
4:02:01
Drew Hernandez
5 hours agoCHAOS AT U.S. UNIVERSITIES & AZ DEMS INDICT TRUMP SUPPORTERS
30.9K37 -
1:06:34
Mike Crispi
18 hours agoLAST CALL WITH MIKE CRISPI | FT. BOBBY SAUCE & CARMEN ESTEL| LATE NIGHT POLITICAL TALK ON RUMBLE! 4-24-24
28.1K12 -
1:04:17
Snuffing Torches
15 hours agoSurvivor 46 Episode 9 Recap | Snuffing Torches
35.2K3 -
57:50
The Anthony Rogers Show
16 hours agoEpisode 299 - The Real Estate Episode
40.5K3 -
2:31:04
Laura Loomer
8 hours agoEP43: TERRORIST TAKEOVER: College Campuses Held Hostage by HAMAS
55.9K98 -
1:26:18
Mally_Mouse
7 hours agoLet's Hang!!
42.9K9