1:24 Beer Crates - First Test Run
2 years ago
23
Printed on my Prusa SL1S resin printer. A test printing with one crate printed horizontal with heavy supports only on the bottom and the other at 45° with heavy supports on the bottom and medium supports on the one side.
Conclusion is too much support scaring on the 45° print. The other one is mostly ok .. but think it needs additional Light supports around the perimeter of the bottom.
These were printed at 0.05 mm layers. I may try at 0.025 layers to see the difference if any.
Loading comments...
-
0:54
MicroMimesis
2 years ago1:24 Beer Crates - Test Run
44 -
1:56
MicroMimesis
2 years ago1:24 Beer Crates and Bottles V3 Update
25 -
2:51
MIKEFROMSPACE
2 years agoCr10 test 5
27 -
6:16
Randy May
1 year agoEnder 5 S1 Enclosure - Installation & Testing Using ABS
54 -
0:59
RoXolidProductions
6 months agoHoly Speed, Batman! First 3D Print Results on Creality K1
43 -
9:18
The 3D Print General
1 year ago $0.01 earnedFirst Look at the Bambu Lab P1P
2191 -
9:08
The 3D Print General
1 year ago $0.11 earnedBambu Lab Maintenance
631 -
0:16
GVETech
9 months agoFrom Frustration to Fulfilment: Enjoying the success of First Layers on a 3D-Print.
24 -
11:16
Maker Tales
2 years ago $0.01 earnedTrying 3D Resin Printing For The First Time
22 -
0:49
Rochel Atkins Rumble Channel
2 years agoFirst print on first 3d printer
43