LANTAC UAR Advanced Billet Upper Receiver for AR
https://www.amazon.com/shop/petervonpanda
Join this channel to help me bring you more vids...
https://www.youtube.com/channel/UCS-ix9RRO7OJdspbgaGOFiA/join
Join the free von Panda group here... https://panda-research-institute.mn.co
Get Peter von Panda gear here... https://petervonpanda.storenvy.com/
Instagram... https://www.instagram.com/petervonpanda/
As an Amazon Associate I earn from qualifying purchases.
The patent pending SMOOTHCAM system features a domed head, low friction cam pin and special upper
receiver that offer ultra smooth operation.
With its blended cam recess the UAR upper is machined from Billet 7075-T6 certified aluminum and milspec, Type3, Class2, Deep Black, Hardcoat Anodized.
The UAR is a precision machined upper with a special burnished bore that gives a compacted internal surface with a roughness average in micro inches of 16, as opposed to standard bored or milled uppers that are 32-63, or higher.
This reduces bolt carrier friction and creates a much smoother operation.
Barrel nut threads, bore and barrel extension surfaces are all machined in one operation so that they are
perfectly concentric and perpendicular to the barrel and fixing assembly.
The cam pin recess has been carefully designed with a smooth surface that flows into the main reciprocation channel.
This allows our specially designed radial, domed head cam pin to move with the minimum of wear against these
internal surfaces.
The CP-R360 Cam Pin has no moving parts to break or lock up.
Machined from 17-4 PH Stainless Steel and hardened to H900 (45RC Approx) its head is polished for a super smooth finish. The cam pins circular head has a single flat face machined into it at the front so that it can be inserted into any bolt carrier without having to remove the gas key.
Two further flats are machined at 90 degrees to the front face that assist in reducing internal wear to the cam channel.
The unique domed head allows the cam pin to operate in a completely different position to a traditional pin, with the radius of the head curving away from the receivers internal surface, rather than forming a hard or sharp edge on its upper corner that causes wear.
Finished in its natural hardened state, copper/brass color.
Used in conjunction with our UAR upper and you have a complete, ultra smooth, low friction, minimum wear system.
Package Includes CP-R360 Domed head ultra smooth Cam Pin.
Specification:
Material: Billet 7075-T6 Aluminum
Finish: Milspec Type3, Class2 Deep Black Hardcoat Anodize.
Super smooth burnished Bore.
M4 Feedramps as standard.
Blended Smoothcam system
Includes CP-R360 Domed Head Cam Pin.
Made in the USA.
Stripped Weight 8.8oz (249.4g).
-
2:45
Peter von Panda
9 years agoOnly the Vertex V Seven flat dust cover works on the Lantac UAR billet upper receiver
56 -
6:56
Peter von Panda
9 years agoJuggernaut Tactical complete billet aluminum AR-15 lower receiver
311 -
3:51
Griffin Armament Product Overviews
1 year agoGriffin Armament Revolution Pistol Silencer Mod 3
420 -
9:39
SeidelRanch
3 years agoRuger SR22 High Capacity 15+1 Round Magazine
103 -
1:58
Griffin Armament Product Overviews
9 months agoGriffin Armament Recce 5K Suppressor
429 -
12:05
CAVCOP
5 months ago $0.41 earnedPART 2 of 2: How to assemble an AR/M4 lower receiver
1.43K34 -
1:52
Griffin Armament Product Overviews
10 months agoGriffin Armament DUAL-LOKâ„¢ HRT-762â„¢ Suppressor
394 -
10:37
GunDeals
6 months ago $0.08 earnedBest AR9 Parts? - Aero EPC-9 (DTT Warship)
275 -
9:36
BoomStick Tactical
1 year agoFinishing the AR 15 build using an Anderson Lower Receiver and Bushmaster Upper
1.05K -
18:38
GunDeals
8 months ago $0.04 earnedA Cheap 1-10x LPVO??? - Primary Arms SLX 1-10x ACSS Griffin Mil
125