Honeywell Lyric SiXSiren: Program to a Lyric Alarm System

In this video, Jorge shows users how to enroll a SiXSiren with a Lyric Controller. This can be done using a feature called batch enrollment. This allows users to program multiple SiX Series devices at once. To do this, simply put the panel into batch enrollment mode and then activate any SiX Sensor.

Honeywell SiX Series Sensors are unique because they communicate at 2.4 GHz WIFI, and they are protected by 128-bit AES encryption. These sensors are designed exclusively for use with Honeywell Lyric Systems. The batch enrollment process for SiX Series Sensors can be completed through system programming. A user will need the system's Installer Code to access the programming menu.

Once the user is inside of programming, they should choose Zones, followed by the "SiX Batch" button. By pressing this button, the word "Start" will change to "Stop". This indicates that the Lyric Controller is in its batch enrollment mode. Any Honeywell SiX Sensor that is activated will be recognized by the system and learned-in automatically. A sensor will be assigned to the first available wireless zone on the system.

To learn in the SiXSiren, simply power on the device by adding the required four AA batteries. If the siren is powered on while the panel is in batch enrollment mode, it will be learned-in with the system. If you highlight the assigned zone on the system, the LED light on the SiXSiren will display green. This is assuming that the SiXSiren was enrolled successfully. This can be useful for identifying the siren if multiple SiXSiren devices are programmed.

After the device has been programmed, its settings can be configured. These settings includes naming the siren, turning on alarm reporting if the tamper is activated and turning on RF supervision. The settings can be changed at any time.

http://alrm.gd/get-monitored