How To Color Asphalt Driveway With Colored Sealcoat

Get beige here... https://geni.us/jr2A1
Get gray here... https://geni.us/J8tPI
Get red here... https://geni.us/F9ut

https://www.amazon.com/shop/petervonpanda

Join this channel to help me bring you more vids...
https://www.youtube.com/channel/UCS-ix9RRO7OJdspbgaGOFiA/join

Join the free von Panda group here... https://panda-research-institute.mn.co

Get Peter von Panda gear here... https://petervonpanda.storenvy.com/

Instagram... https://www.instagram.com/petervonpanda/

As an Amazon Associate I earn from qualifying purchases.
Latex-ite 4.75-Gal. Color Grade Blacktop Driveway Filler/Sealer in Natural Beige
Brand: Latex-Ite

(Note: If product is not available to order in your area that is due to nighttime temperatures. Product may not cure and/or track in late Fall and early Spring applications). Latex-ite 4.75 Gal. Color Grade Blacktop Driveway Filler/Sealer in Dark Beige is the first tinted sealant for blacktop. Color grade is a ready-to-use, low VOC, water based sealer designed to beautify and protect your blacktop driveway with color. Color grade is a durable, tinted filler or sealer that resists hot tire pick-up, chemicals and leaves a non-skid finish. The lighter version Gray or Beige will help reduce heat buildup on your blacktop. For use on exterior blacktop only (previously sealed or unsealed). Not for use on concrete. Not for use on commercial parking lots. Check the weather and make sure no rain is forecast and it is at least 55°F at night (a cold driveway will not allow the sealer to cure properly and may track). Approximately 400 sq. ft. to 500 sq. ft. coverage for good condition, smooth or previously sealed blacktop Approximately 300 sq. ft. to 400 sq. ft. coverage for moderate condition, minor cracking or graying blacktop Approximately 200 sq. ft. to 300 sq. ft. coverage for poor condition, rough or unsealed blacktop Coverage will vary based on blacktop condition 2 coats (maximum) must be applied to achieve color uniformity completing each coat in one continuous application to prevent color shading Make sure to check color sample image on HomeDepot.com to see actual color Test a small area prior to coating entire driveway so you can see the color (remember you are covering black so apply 2 coats) - dark beige will dry darker than the lid color in photo - please check the color card image for actual color Apply with squeegee (no rollers) - brushes are fine for the edges

Latex·ite® Color Grade® Driveway Filler/Sealer
Latex·ite® Color Grade® Filler/Sealer is a ready-to-use, high performance, asphalt based blacktop filler sealer (NOT FOR CONCRETE) that will beautify and protect the entrance to your home or your parking lot (available in 55gal drums as well). Customers have asked for a color sealant to both beautify and in some cases to cool down their blacktop …so here it is! Color Grade® is a durable, tinted sealer that resists hot tire pick-up, chemicals and leaves a non-skid finish.

It is available in three colors: Natural Beige, Dover Grey and Brick Red. The temperature of the blacktop will certainly be reduced by using a lighter shade like the gray or dark beige. Our recent test on Beige showed an 18 degrees F reduction versus the blacktop and our recent Gray Test yielded a 20 percent reduction in surface heat!

Please note that since you are applying to a black surface the color will be a bit darker than the color you see on the pail art.

Advance Polymer Formula
Fortified, Non-Skid
UV Protected
Low VOC, Easy Clean-Up
Apply with Seal Right Squeegee (Roller is wrong applicator and voids warranty)
Not for use on stamped asphalt
Cool your driveway or parking lot with Beige or Grey Color Grade!

Latex·ite® Color Grade® Driveway Filler/Sealer