How to Clean Car Fuel System with Lubegard Fuel System Booster Cleaner

Get it here... https://geni.us/5tGO4Show more

https://www.amazon.com/shop/petervonpanda

Join this channel to help me bring you more vids...
https://www.youtube.com/channel/UCS-ix9RRO7OJdspbgaGOFiA/join

Join the free von Panda group here... https://panda-research-institute.mn.co

Get Peter von Panda gear here... https://petervonpanda.storenvy.com/

Instagram... https://www.instagram.com/petervonpanda/

As an Amazon Associate I earn from qualifying purchases.

Lubegard 77012 Fuel System Booster Cleaner

LUBEGARD Fuel System Booster is a state-of-the-art new fuel additive made with the highest quality premium PEA and FLA technologies. It is the first product of its kind able to specifically address and treat the newer DIG (direct injection) fuel systems in addition to the traditional intake-port delivery systems of today. LUBEGARD Fuel System Booster is the first 3-in-1 product that provides a total system clean-up and keep-clean, fuel lubricity additive, and fuel stabilizer.

Contains a unique, proprietary polyether amine (PEA) detergent technology, the most effective chemistry for total fuel system cleanup that outperforms competitors
EPA/LAC, CARB, and TOP TIER™ compliant
Ideal for new DIG fuel systems
Can be used in any type of engine; gasoline or diesel
Cleans carburetor / fuel injectors in one tank
Removes deposits from combustion chamber and intake valves
One step process, just pour in the tanks, does not require aerosol
Prevents hesitation, rough idle, and stalling
Improves fuel economy and horsepower
Allows less expensive, lower octane fuel to be used
Stabilizes fuel during storage
Reduces emissions

Because fuel is delivered directly into the cylinder, DIG engines do not have a throttle plate. So it is not necessary to use an accompanying aerosol in order to perform a complete clean-up.

DIG Functions at far higher pressures ~ 2,000 psi vs. ~50 psi
Injection cycle is a much shorter period of time
Port Injection has two rotations of the crankshaft to inject the fuel. At 6,000 rpm, this is 20 milliseconds.
DIG occurs in a portion of the intake stroke, which occurs in 0.4 to 5 milliseconds
Fuel stream is much more finely atomized
DIG stream is 1/5th the droplet size of PFI
Allows increased airflow into combustion chambers
BMW CERTIFICATION:
Testing in the standard BMW test (ASTM D 5500)
using a US EPA 65th percentile fuel establishes a
minimum dosage of 120 ppm LUBEGARD® Fuel
System Booster for this combination of test and base fuel.

Test Method: ASTM D5500
Engine: 1.8L (318i BMW)
Duration: 5,000 Miles
Fuel: Base E11A (No EtOH)
Duration: 10,100 Miles
Fuel: Base + 10.2% EtOH + LUBEGARD® Fuel System Booster

CLICK TO ENLARGE

DIG CLEANUP TEST:

CLICK TO ENLARGE

In the 1.8L Mitsubishi Carisma outfitted with GDI, an IVD cleanup test was run. Deposits were built up using a fuel containing a premium synthetic additive, then cleaned up in two tanks using 3200ppm LUBEGARD Fuel System Booster.

LUBEGARD Fuel System Booster cleaned up 29% of the deposits left by the premium synthetic additive.

PFI CLEANUP TEST:

The dirtiest injector when buildup was complete on the three tank cleanup was 21% flow restricted. All of the dirty injectors cleaned up to within 1% of the original 100% flow.

Engine: Chrysler 2.2L tc, I-4 w/MPFI
Buildup: 999 miles
Cleanup: 1005 Miles

CLICK TO ENLARGE

LONG TERM FUEL TRIM (LTFT) TEST RESULTS (VIA OBD-2):

CLICK TO ENLARGE

LTFT is an ECM algorithm for adaptive fuel trim. In order to accommodate a plugged DIG injector nozzle, the injector must stay open for longer period of time.

For this test, we used a 2012 Camaro 3.6L V6 LFX.