Factory Resetting the Honeywell Lynx Touch L7000

In this video, Jarrett demonstrates how to perform a factory reset on the Honeywell LYNX Touch L7000. This is done by loading one of the Default Configurations. The Default Configurations are found within programming. The panel's Installer Code must be provided to access the system programming menu.

Loading a Default Configuration and performing a factory reset will basically wipe the entire system. All its settings and configurations will be restored to the default. Any zones will need to be reprogrammed, all sensors will need to be re-learned, and all system options and selections must be reconfigured. The Master Code will be reset to 1234, while the Installer Code will be reset to 4112. All other codes will be cleared.

The most common reason to perform a factory reset is because the user has taken over the L7000 System from someone else, and they want to start from scratch with a completely fresh system. By performing a factory reset, the system will operate as though it is brand-new and fresh out of the box. The new user can then reconfigure the system to their linking and make it their own. This is often a better option than simply trying to readjust the system with its current settings and configurations.

Performing a factory reset might also be conducted as final troubleshooting step. If the system isn't responding properly, then normally a power cycle reset will fix the problem. But if it doesn't, then a user might try a a factory reset as a last resort. The problem with doing this is that the entire system will need to be reprogrammed. This can be super inconvenient for the end user if they already have the system to their linking. However, factory resetting an L7000 will fix almost any non-physical issue with the panel.

http://alrm.gd/get-monitored