Secure Arming On The Qolsys IQ Panel 2 Plus

In this video, Michael from Alarm Grid discusses the Secure Arming feature on the Qolsys IQ Panel 2 Plus. This feature is also found on the original IQ Panel 2. When Secure Arming is enabled, a user must enter a valid user code or the Master Code when they go to arm their system.

The user must also provide a valid user code if they go to cancel an arming session early by pressing the red X button during the Exit Delay countdown. The Secure Arming feature is disabled by default on the system. A user must enable the feature within the Security & Arming Menu if they want to use it.

Most users elect to keep the Secure Arming feature disabled, as it only slows them down when they go to arm their system. But some users choose to enable the feature to prevent accidental system arming. A common reasoning is that they have small children who may get into the security system and accidentally arm it. Requiring a code entry through secure arming can prevent this situation.

It is important to note that the Installer Code and Dealer Code cannot be used to initiate a secure arming session. Only the Master Code and valid user codes can be used to initiate an arming session when secure arming is enabled. You should make sure that everyone who is permitted to use the system knows a valid code. This is especially important if you enable secure arming, as they will not be able to cancel the arming session during the Exit Delay countdown without a valid code.

Remember that you will need the system's Installer Code or Dealer Code to access the Security & Arming Menu to enable or disable the feature. The default Installer Code is 1111, while the default Dealer Code is 2222.

https://www.alarmgrid.com/faq/how-does-secure-arming-work-on-the-iq-panel-2-plus

http://alrm.gd/get-monitored