Deleting a Wireless Zone from a Simon XT

In this video, Michael from Alarm Grid shows you how to delete a wireless zone from an Interlogix Simon XT, which is also known as the GE Simon XT. All versions of the Simon XT feature forty (40) wireless zones. When you delete a wireless zone from the system, it opens up the zone so that it can be used with a new sensor. This can be very useful if you have run out of wireless zones on the system and you really need to enroll a new one. Deleting a sensor is also useful if there is a sensor on the system that you no longer want to have trigger system responses. Once you delete a sensor, it must be re-enrolled if you ever want to use it again.

All versions of the Interlogix Simon XT and the GE Simon XT use 319.5 MHz wireless sensors. These sensors are sold by a variety of different manufacturers. Interlogix and GE have made their own throughout the years, and there are also some from Qolsys. You may also encounter some third-party 319.5 MHz sensors, such as the VERSA-GE Door and Window Contact. In any case, these sensors can all be auto-enrolled with the Simon XT. Once a sensor is enrolled with the Simon XT, it can then be deleted from the system if needed. Only sensors that have been enrolled with the Simon XT will appear in the deletion menu.

In order to enroll or delete a sensor, you must provide the system's Installer Code. The default Installer Code for a Simon XT is 4321. The Sensors Menu is accessed by scrolling down to the Programming option from the main screen. Enter the appropriate Installer Code, and click OK. Then locate the Sensors Menu. This is where you will go to add, edit, and delete sensors for the Simon XT.

https://www.alarmgrid.com/faq/how-do-i-delete-a-wireless-zone-from-a-simon-xt

http://alrm.gd/get-monitored