How to Drywall Corner Bead - Applying Drywall to Corner Bead

Phil shows how to put drywall onto your corner beads. He makes it look easy, but it takes practice.

⏱️⏱️Chapters⏱️⏱️
00:00 Intro
00:12 We have corner bead
00:30 Putting the drywall mud on the corner
00:55 Pulling off with an eight
01:50 One sponge of water in the bucket
03:00 Second corner bead
05:05 You can do this
05:18 Follow us

🙏 Subscribe, 👍, it helps a lot!!
➤❓/ 💬: ask@straightarrowrepair.com
➤ Follow https://straightarrowrepair.com/pipf

➤➤I get a little for the channel-no charge for you if you use the links:
➤➤Shop Amazon https://amzn.to/3CxD1T4
➤➤Tool lists & recommended products🧰 https://straightarrowrepair.com/0lvf

➤➤Services We use
➤➤MORNINGFA·ME https://morningfa.me/invite/StraightArrowRepair
➤➤A2 Hosting http://www.a2hosting.com/refer/140244
➤➤Tubebuddy https://www.tubebuddy.com/StraightArrowRepair
➤➤Apsumo http://fbuy.me/v/philbridges
➤➤VidIQ: https://vidiq.com/straightarrowrepair

#HomeRepair, #HomeImprovement, #Drywall

Transcript:
OK, We have corner bead. Going to put some what you, what I would call loading up on the corner bead. A lot of times what you do is you pull into the bead, if you pull down at the end of it all you can just pull down the bead. Pull into that high corner. Alright. Pulling off with an eight. It's the same kind of mud used on the bed coat, one sponge of water in the bucket. Only when people are watching.

There's the bed coat on it. What you might do is knock these off. Pull it right in the corner, pull off the excess so it don't build up on you. "And wash your hands." Constantly. It has to be standing up. Still standing up. Once that mud dries I'll hammer that screw down. Ta-DA!! It can take a while to get used to doing it. But you could do it. I promise you. You're Americans not American'ts