Click PLC Simple Conveyor EasyPLC
EasyPLC Software Suite is a complete PLC, HMI, and Machine Simulator Software package. This PLC learning package includes a Machine Simulator (MS). This virtual 3D world with real-time graphics and physical properties can communicate to several different programmable logic controllers. (PLC)
The Machine Simulator (MS) is part of the EasyPLC software suite. It has many built-in machines that can be programmed. A simple conveyor is one of these machines. This is usually the starting point for learning about the machine simulator. This conveyor example will use two digital inputs and two digital outputs. A pallet will move back and forth on the conveyor. When the pallet is detected on each end it will stop and reverse direction. If both motors are started at the same time, the motors will burn up. This will be demonstrated. The machine simulator will allow you as the programmer to make mistakes before trying your program in the physical world.
The Click PLC will be used to program this virtual machine. Using the Click Plus PLC, we will connect the simulator to the simple conveyor machine. This will be done using Modbus TCP (Ethernet) for communications. Using the five steps for program development we will show how this is programmed. Let’s get started.
More information can be obtained on our website. This includes all of the links mentioned in this video.
https://accautomation.ca/click-plc-simple-conveyor-easyplc/
00:00 Click PLC Simple Conveyor EasyPLC
01:25 Define the task: (Step 1 – Simple Conveyor)
03:36 Turning Both Conveyor Motors On - Burning
04:21 Define the Inputs and Outputs: (Step 2 – Simple Conveyor)
04:39 Develop a logical sequence of operation: (Step 3 – Simple Conveyor)
05:41 Develop the Click PLC program: (Step 4 – Simple Conveyor)
07:18 Click PLC Modbus Addresses - Address Picker
08:10 Click PLC Ethernet Port Setup - Modbus Server (Slave)
09:35 Click PLC Hardware
10:42 Connecting EasyPLC Machine Simulator to Click PLC
12:32 Test the program: (Step 5 – Simple Conveyor)
Previous posts include the following:
EasyPLC Installing the Software
https://accautomation.ca/easyplc-installing-the-software/
https://youtu.be/EbWS_elbI2w
Click PLC – Easy Transfer Line Programming
https://accautomation.ca/click-plc-easy-transfer-line-programming/
https://youtu.be/o7G_ZtPBjbg
Productivity PLC Simulator - Chain Conveyor MS
https://accautomation.ca/productivity-plc-simulator-chain-conveyor-ms/
https://youtu.be/wp16dsrCvb8
Do-More PLC – EasyPLC Box Selection Program
https://accautomation.ca/do-more-plc-easyplc-box-selection-program/
https://youtu.be/4QP4d3vD930
Click PLC EasyPLC Gantry Simulator
https://accautomation.ca/click-plc-easyplc-gantry-simulator/
https://youtu.be/QLdAxAnh9ps
EasyPLC Software Suite is a complete PLC, HMI, and Machine Simulator Software package.
This PLC learning package includes the following:
Easy PLC - PLC Simulation that will allow programming in Ladder, Grafcet, Logic Blocks, or Script.
HMI System - Easily create a visual human-machine interface (HMI),
Machine Simulator - A virtual 3D world with real-time graphics and physical properties. PLC programs can be tested using the EasyPLC or through other interfaces. (Modbus RTU, TCP, etc.)
Machine Simulator Lite - Designed to run on Android Devices.
Machine Simulator VR - Virtual Reality comes to life so you can test, train or practice your PLC programming.
Purchase your copy of this learning package for less than $75 USD for a single computer install, or less than $100 USD to allow different computers.
Receive 10% off the price by typing in ACC in the comment section when you order.
http://www.nirtec.com/index.php/purchase-price/
Learn PLC programming the easy way.
Invest in yourself today.
Here is a list of YouTube Shorts about EasyPLC Software Suite including the Machine Simulator.
https://www.youtube.com/playlist?list=PL3y71jAPOdZAvTC8-TWNifAHpgEkAfqZQ
ACC Automation
https://accautomation.ca/
-
23:02
AccAutomation
2 years agoClick PLC EasyPLC Gantry Simulator
22 -
22:12
AccAutomation
2 years agoClick PLC - EasyPLC PLC Mixer Programming
28 -
6:34
Shane Welcher
1 year agoPLC Ladder Logic Basics For Beginners With A Working Conveyor
296 -
5:56
Shane Welcher
1 year agoPLC Ladder Logic Basics for Beginners Box Sorting Conveyor Using Studio 5000
33 -
28:14
Shane Welcher
2 years agoPLC Programming Function Block - Conveyor Box Controls
29 -
6:19
Shane Welcher
2 years agoEasyPLC Machine Simulator 02 Chain Conveyor Using Studio 5000 Rslinx OPC
17 -
12:30
Shane Welcher
1 year agoPLC Ladder Logic for a Pallet Sorting Conveyor Based on Pallet Height
51 -
18:58
Shane Welcher
2 years agoPLC Programming a Pneumatic Machine that Assemble Parts
15 -
16:33
Shane Welcher
2 years agoEasyPLC Machine Simulator Using Studio 5000 Rslinx OPC | Robot Cell Example
9 -
28:26
Shane Welcher
2 years agoEasyPLC's Machine Simulator Editor Tutorial Using The Saw Gantry
15