Click PLC Analog Dusk to Dawn Program Example

2 years ago
30

A dusk to dawn sensor usually is discrete on/off of the lighting control. If we want to vary the lights to mimic more of the sunset and rise, we would use an analog output to control the lights. I was recently asked about such a program. Every day they wanted the lights to go off at 10 pm and come back on at 6 am. At 9:30 pm the lights would be on at 70% or 7volts of a 0-10V signal. In the next half hour, the program will bring the lights from 70% down to 0%. In the morning the lights will come back on within the half-hour from 0% to 70%. Poultry Farms are one place that would utilize this program.
We will be developing a program that will do this with our Click PLC. Let’s get started!

More information can be obtained on our website. This includes all of the links mentioned in this video.
https://accautomation.ca/click-plc-analog-dusk-to-dawn-program

Previously we discussed:
Click PLC System-Hardware.
https://accautomation.ca/click-plc-system-hardware/
Click PLC Installing the Software
https://accautomation.ca/click-plc-installing-the-software/
Click PLC Establish Communication
https://accautomation.ca/click-plc-establish-communication/
Click PLC Numbering System and Addressing
https://accautomation.ca/click-plc-numbering-system-and-addressing
Click PLC Timers and Counters
https://accautomation.ca/click-plc-timers-and-counters
Click PLC Compare and Math Instructions
https://accautomation.ca/click-plc-compare-and-math-instructions
Click PLC Program Control Instructions
https://accautomation.ca/click-plc-program-control-instructions
Click PLC Shift Register Instruction
https://accautomation.ca/click-plc-shift-register-instruction
Click PLC Drum Instruction
https://accautomation.ca/click-plc-drum-instruction
Click PLC Send and Receive Instructions
https://accautomation.ca/click-plc-send-and-receive-instructions
Click PLC AdvancedHMI Communication
https://accautomation.ca/click-plc-advancedhmi-communication
Modbus RTU Click PLC Master to BRX PLC Slave Communication
https://accautomation.ca/modbus-rtu-click-plc-master-to-brx-plc-slave-communication
Video
https://youtu.be/CIsj-Xppoog
Click PLC - Update Firmware
https://accautomation.ca/click-plc-update-firmware
Video
https://youtu.be/1X_kw4Rhokw
Click PLC HMI Rotary Encoder Dial Input
https://accautomation.ca/click-plc-hmi-rotary-encoder-dial-input
Video
https://youtu.be/mix9k2RTdII
High-Speed Counter - Part 1
https://accautomation.ca/click-plc-high-speed-counting-part-1
High-Speed Count Mode Video
https://youtu.be/P3l34unyAyU
Interval Measurement Mode Video
https://youtu.be/-t8JSKruilE
Duration Measurement Mode Video
https://youtu.be/znF6PRwGq-Y
Frequency Measurement Mode Video
https://youtu.be/m0I9P5AoFqE
Click PLC High-Speed Counter - Part 2
https://accautomation.ca/click-plc-high-speed-counting-part-2
External Interrupt Mode
https://youtu.be/UxFffVddUt4
Pulse Catch Mode
https://youtu.be/2H0zwul1X3o
Filter Pulse Mode
https://youtu.be/FNbYAkBwIsQ
Frequency Measurement and High-Speed Count Mode
https://youtu.be/qV3jgRszghE

The entire Click PLC series can be found at this URL:
https://accautomation.ca/series/click-plc/

There are several reasons why we are using the Click PLC. Here are just a few.
- Investment is low for the hardware and the software is free
- Standalone PLC with built-in I/O
- Communication ability - Ethernet Port, RS232, RS485 - support for protocols such as Modbus RTU, Modbus TCP, etc.
- Ability to expand the system with a variety of modules including RTD and Thermocouple inputs directly.

https://www.accautomation.ca

Loading comments...