Trimming Brass for Reloading || 308 Winchester Reloading Series

As part of the 308 Winchester reloading series, we are now ready to trim our Lapua brass with the LE Wilson case trimmer.
https://bigwyoming.comShow more

After the sizing process, the brass has grown and needs to be trimmed. The LE Wilson case trimmer is the best trimmer I've found for uniform length and square necks. Once trimmed, the cases are then deburred to ease the seating and chambering process. Finally, a nylon brush is run through the necks to remove any brass trimmings and carbon build-up. This step also helps with uniformity in bullet seating.

Steps in our reloading process:
1. Anneal
2. De-prime
3. Tumble clean
4. Size brass - Bump Shoulder, Size Neck, Mandrel Die for the final run.
5. Trim/Chamfer/Brush Necks

Tools used:
LE Wilson case trimmer w/ power adapter
LE Wilson case holder
LE Wilson case deburring tool
Nylon brush

Like.
Subscribe.
Share.

Support the channel for more content like this -
Merch: https://bigwyoming.com
Facebook: https://www.facebook.com/BigWyomingAp...
Instagram: https://www.instagram.com/bigwyominga...
Twitter: https://twitter.com/WyomingBig

---------------------------------------------------------------------------------------------------------------------------
#reloading #precisionrifle #fclass #308 #Lapua #LEWIlson