Removing A Door in a Mobile Home putting a House Type Door In

Removing A Mobile Home Door to House Type Door In. How could you make sure a door is square?

Phil goes step-by-step on how the door is out of level, why this is a problem. They remove the door, brick molding, and the door jam, showing you each step.

We'll be back later with the next step of this job.

⏱️⏱️Chapters⏱️⏱️
00:00 Follow along with a handyman/repairman
00:25 Replacing doors-showing where out of square
00:58 How they could have fixed it
01:28 Removing the brick mold-wide trim on outside of door
02:00 Put on with finger joints
02:38 And the door was being held by the trim
03:10 Make the job easier, take the door off
04:28 Door Jam was only held by a few screws
05:07 Aphids/ladybugs watch them they will bite
05:25 Clean up watch for other visitors trying to keep warm
05:50 Tile over the carpet… Probably not the best choice
07:31 Learning how out of level the door jam is
08:00 Deciding how out of square and what needs to be done
08:59 We're Not Ameri'can'ts' we're Ameri'cans'

🙏 Subscribe, 👍, it helps a lot!!
➤❓/ 💬: ask@straightarrowrepair.com
➤ Follow https://straightarrowrepair.com/pipf

➤➤I get a little for the channel-no charge for you if you use the links:
➤➤Shop Amazon https://amzn.to/3CxD1T4
➤➤Tool lists & recommended products🧰 https://straightarrowrepair.com/0lvf

➤➤Services We use
➤➤MORNINGFA·ME https://morningfa.me/invite/StraightArrowRepair
➤➤A2 Hosting http://www.a2hosting.com/refer/140244
➤➤Tubebuddy https://www.tubebuddy.com/StraightArrowRepair
➤➤Apsumo http://fbuy.me/v/philbridges
➤➤VidIQ: https://vidiq.com/straightarrowrepair

#MobileHomeRepair, #MobileHomeImprovement, #DIYHomeRepair