1984 Honda V65 Sabre Engine Idle Testing
After I made a temporary gasoline bottle for testing the engine run for short time. I use a 5/16 bolt with hex nut and drill the hole in the center of the bolt. I connect a clear plastic tube from the 5/16 bolt outlet of the bottle and connect to the gas line. I mixed the regular unleaded gasoline with the jet cleaner and run thru the system. I didn't punch a hole on the bottle for equalize air pressure. After the engine runs for awhile that created vacuum in the bottle, you can see the bubble at the clear line connectors moving back by suction in the bottle. That's OK for the quick test.
Yesterday (Oct/21/2021) I received the gasket for the petcock gas valve and replaced it.The fuel tank outlet port is clean out and has a very good gas flow.
Hopefully I don't have any problem with the fuel system.
-
3:35
Wolverine Gyroplane
1 year agoEngine run test
122 -
4:13
dcairns
10 months ago1964 327 (Bored/Stroked to 383) Dyno Test
1 -
0:26
NitroBurp
3 years agoTesting an engine
41 -
59:11
Renover
1 year agoCar Corner: Base Engine Testing
1 -
21:45
ScottsHonestReviews
3 years ago4.0 v6 mustang idle chop mod - idle 725 On The Road Testing
2 -
28:36
Savage and Me
1 year agoSPEED TEST MY SAVAGE 17 HMR
30 -
7:34
Narin Creative
10 months agoUnleashing Power: Testing the Tiniest V8 Engine Ever Built - ENGINEDIY
3 -
0:44
Womblefam1857
2 years ago#28 steam engine on test trials...
113 -
0:34
Biggest_Motivation_Ever
1 year agoBMW X6 E71 40D Acceleration test to 180
4 -
5:25
SST CAR SHOW
3 years agoHONDA CIVIC Si TEST DRIVE AND REVIEW
125