Bird House Series part 2: DIY Church

Hey Everyone!

Here is part 2 of my Bird House Series! With the price of wood, I needed to come up with another way to keep my creative juices flowing without breaking the bank. As I said in my last post, I enjoyed making my "squirrel" house, I decided to build a village! And what do you see in most small villages? A church!

So this is the Church of the Carolina Wren (South Carolina State Bird) for my little village. It turned out really well and very easy to build. Below I have the cut list. All you need is 1 cedar fence picket for this is building. So for less than $4.00 you can build this! I did not show the cuts I made, but I do promise you can build this and I promise that in my next video, there will be a detailed cutting portion. This why you can really see what I am doing.

With that said. I do hope you enjoy this video and give it a try. If you have any questions at all, please do not hesitate to ask me anything. Thank you for watching, thank you for being here. Please don't forget to like, share and subscribe! Happy Building!

Cut List:
Roof 1: Main building (width x length)
1 @ 5.5 x 5.5 inches
1 @ 5.5 x 6 inches
Roof 2: faux door
1 @ 1.25 x 3.5 inches
1 @ 1.75 x 3 inches
Roof 3: gable
1 @ 2.5 x 3 inches
1 @ 3 x 3 inches
**remember, use the roof angles for the former cuts**
Main building (width x length)
front/back: 2 @ 5.5 x 13 inches
side walls: 2 @ 3.5 x 9.5 inches
faux door: (width x length)
1 @ 3 x 6 (use scrap cut offset for sides)
Gable: (width x length)
front/back: 2 @ 2.5 x 5.5 inches
sides: 2 @ 1.5 x 3 inches

Amazon link: 8x 10 Plexiglass
https://www.amazon.com/gp/product/B08KP64YT8/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1