Mobile Power Distribution Panel - 208Y/120V 3 Phase - (4) Receptacles, Camlock Input - NEMA3R

https://www.larsonelectronics.com/product/267688/mobile-power-distribution-panel-208y-120v-3ph-4-receptacles-camlock-input-n3r

Made in Texas

The Larson Electronics MPD-CD1-CLPB-YT0YT-00-1.N10-M1 temporary power distribution system offers operators a primary and secondary three-phase voltage of 208Y/120V via a 400-amp main lug only panel. This power distribution system provides operators the ability to safely tap into power from a variety of sources including generators and direct grid power. This portable panel is suitable for indoor and outdoor applications.

The MPD-CD1-CLPB-YT0YT-00-1.N10-M1 temporary power distribution system gives operators the ability to power their 208 volt and 120 volt equipment from a single system. This portable panel is designed to operate with three-phase 208Y/120V AC. The power distribution on this portable panel makes 208V available via one set of female camlocks (green, white, black, red and blue), 120/208V available via two MS90555C32412S receptacles and 120V available via one 5-20R duplex GFCI receptacle.

Operation:

• Primary/Secondary Voltage: 3-phase 208Y/120V AC

• Receptacles: (1 set) 400-amp 600V rated, 90-degree female camlocks (green, white, black, red and blue), (2) MS90555C32412S [120/208V], (1) 5-20R duplex GFCI [125V]

*See specification table at the top of the page for more information about the power distribution system.

Protective Construction: A weatherproof flip cover at the front of the unit can be lifted upwards via an accessible handle, which serves as protection for (primary and secondary) breakers and receptacles in rugged environments when deployed at the site. Operators may access locks on the door and on the ears (accessible from the inside of the lid) of the panel. The panel can be positioned upwards and locked in place for easy access to receptacles and breakers. A drain plug on the panel helps the power distribution system achieve a NEMA 3R rating, allowing the unit to be used in both indoor and outdoor locations.

The transformer is protected by vibration isolators that reduce damage to exterior jacket of wiring components and decrease noise during operation. In MGL-style power distribution systems, the presence of vibration isolators ensures wiring between the transformer and panel is well protected and does not have to be frequently replaced. Vibration isolators can also be found on the breakers, which protect the breakers from damage, prevent loose bolts/nuts and reduce overall noise during use in the field.

The power distribution system is constructed of steel with a polyester powder coated desert tan finish for durability against dirt, moisture and mild corrosion. This special coating creates a high-strength barrier for protection from accidental bumps and scratches. The TGIC polyester powder coat finish offers reliable resistance against chemicals, UV light (sun light) and degrading elements in outdoor locations. Our powder coating solution ensures robust color retention for many years without fading. Custom colors, such as standard blue, grey or forest green, and galvanized finishes are available upon request. Non-standard powder coat colors or galvanized finishes may increase price and lead times.

The transformer and load center/distribution assembly is mounted to a standard steel cart style frame resulting in an extremely stable, durable, and mobile power distribution platform. Two rubber tires and a cart style mounting platform provides easier substation mobility, and a center point lift eye allows easy lifting with cable or chain hooks. This temporary power distribution solution can be modified to meet the needs of job-site receptacle requirements. Larger units are available upon request and can be equipped with skids or trailer mounted.

Certification: All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request.

Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground.
~Please check all motor loads for dual rated motors that will work 208 or 240.~

Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments.

Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1