Honda Forza 300 Valve Clearance and Adjustment (NSS300) using Shims

A video on checking and adjusting the valve clearances (valve check) on a 2015 Honda Forza 300 (NSS300). Tools that you will need for this valve job:

- Socket wrench
- 10mm socket
- 14mm socket
- Philips screwdriver
- H5 allen wrench
- H6 allen wrench
- Metal pick
- Feeler gauge for measuring valve clearance between 0.13mm to 0.25mm
- Caliper
- Torque wrench
- Shims (if valve clearance is out of tolerance)

Intake valves gap specification: 0.16mm ± 0.03mm (0.13mm - 0.19mm)
Exhaust valves gap specification: 0.22mm ±0.03mm (0.19mm - 0.25mm)
Valve shim diameter: 7.45mm

Video playlist:

0:00 Introduction
0:40 What tools are needed
1:02 Disassemble body to reach cylinder
8:48 Remove cylinder cover
10:00 Rotate crankshaft to TDC
10:53 Check intake valve clearance
11:46 Check exhaust valve clearance
12:52 How to calculate new shim size when valve clearance out of spec
13:32 Removing valve shims
14:56 Measuring shims with caliper
15:30 Installing shims into valve
16:56 Reassembly

If you'd like to donate to this channel so we can spend more time producing how-to videos: https://www.paypal.com/paypalme/zooskifilms

#hondaforzavalveadjustment #hondaforza300 #hondaforzavalvecheck