Toroidal Centrifugal Forward And Flyback Capture System (Eplanation) Part 2

https://www.youtube.com/watch?v=e8uHsC4yc30

audio credits
arnaud136
https://pixabay.com/users/arnaud136-10452469/

Toroidal Centrifugal Forward and Flyback Capture System.
Inspired by John Bedini

@mykedoes4099
1 day ago
If you dont double pole switch the flyback gets cancelled on the line . Reminder to those asking why i dont use single pole switching

@mykedoes4099
1 day ago (edited)
The purpose in this design is to have a circuit that can produce centrifugal flow , for AG testing . The core does not have to be solid iron , it can be hollow non magnetic with something magnetic inside perhaps a gas or liquid , inducing clockwise flow with the use of emf.

For those interested in AG you can also put the coils inside the hollow ring and use a diamagnetic material coating on the inside portion , in this setup the induced emf should only need to happen once and the centrifugal flow will continue for some time after 1st emf pulse occurs, perhaps perpetual but gas has friction even more so with liquid , but as for the emf pulse it will continue on its own very long time so long as there is a "vacuum" inside the hollow ring and not other material.

Speaking with some very bright people in particular Jeramiah Pop, and Vor tech, aka Jarvis , they explained to me there are other diamagnetic materials other than bismuth , such as carbon or graphene, in this thinking Dr Keshe method for depositing nano carbon might be considered for the inside portion of the hollow ring. Additionally if you want to use water it requires a double hulled hollow ring to hold the water .

Last but not least , one has to consider the back emf as a possible slowing factor of the centrifugal flow, but so long as its loaded this should not be an issue...

Best Wishes Myke Does ,

Audio Credit
https://pixabay.com/users/back_drop-19410400/
https://pixabay.com/music/pulses-piano-ambient-background-music-an-unknown-journey-208259/

Pulse Motors / Alternative Energies Open Source Talk
"Educational purposes only" Creative Commons

"High Voltage Flyback Loop"
System is to use minimal current needed to generate HV radiant spike
to be placed over battery terminal .

(Avoid using Lithium Batteries with the spike system)

Open discussion on switching circuits , energy systems and general electronics.

"THE FLYBACK LOOP" DOUBLE POLE DOUBLE THROW SWITCHING ON EACH SOURCE BATTERY TO ITS RESPECTIVE INDUCOTOR ABOVE... THE 2 DPDT ARE TRIGGERED INDEPENDENT . ONE DPDT PER BATTERY, EACH BATTERY ACTS AS A SOURCE TO THE COIL ABOVE IT AND LOAD TO THE "OPPOSITE COILS FLYBACK EVENT" , WHAT IS LOADED FROM THE "OPPOSITE COIL" IS THE FLYBACK Pulse Motors Alt Energies Open Source Talk "Educational purposes only" Creative Commons To present please post in public chat or join "High Voltage Flyback Loop"
System is to use minimal current ...radiant spike to be place over battery terminals .I EXPECT DPDT RELAYS TO BE FLYING OFF THE SHELVES DIFFERENT EXAMPLES HOW TO UTILIZE THE FLYBACK WITHIN CIRCUITS USE OF CAPACITORS, RELAYS, BATTERIES ,COILS ,DIODES. LOW VOLTAGE SYSTEMS PRODUCE HIGH VOLTAGES USING THE VOLTAGE BOOST FUNCTION OF THE BACK EMF OR FLYBACK, J.Bedini INSPIRED MODS one way to automate the battery swap in the Standard Bedini SG use "The Flyback Loop"

🎙️ New to streaming or looking to level up? Check out StreamYard and get $10 discount! 😍 https://streamyard.com/pal/d/5614523651325952

🎙️ New to streaming or looking to level up? Check out StreamYard and get $10 discount! 😍 https://streamyard.com/pal/d/5614523651325952