Tubb Flatwire Buffer Spring vs Dirty Bird Fitment in Kynshot Hydraulic Buffer for A5 Recoil Part 1/1

After watching ‪@ChestersHobbies‬ video comparing pretty much every PCC including MPX, MP5, Dissent, Kriss Vector and CMMG Banshee, I decided to replicate his flattest shooting PCC, a Custom Banshee using an A5 length buffer setup with a Vltor A5 length buffer tube, Kynshot RB5007 buffer, and Tubb AR-10 flat wire spring; he credits ‪@c3junkie‬. During my research, I found that not all flat wire springs will work with the Kynshot, including the Strike Industries and post-May 2024 Wilson Combat flatwire springs, credit: ‪@Blowback9‬ Here I show the fitment of the Dirty Bird D086 flat wire spring vs the Tubb's flatwire. Currently I'm using the AR-15 JP Silent Captured Spring with H2 weight and colorless heavy spring, so very curious how this new setup will compare. c3junkie states concerning ar10 vs ar15 flat wire, "If you don’t care about slowing down the cyclic rate I’d recommend sticking with the 556 spring as you can use all the above in just about every 556 configuration and I think you will find it to be superior to almost any other buffer / spring combination especially noticeable in full auto."