WINCHESTER 94 (1894) STEP BY STEP DISASSEMBLY FOR THE EVERYDAY PERSON //Winchester 30-30 disassembly

Need to disassemble a Winchester model 94? I will walk you through the process step by step so that you can maintain your rifle.

My Winchester 94 (1894) disassembly video will show you how to disassemble the "New Model" of the Winchester model 94 down to its individual components. We do not remove the barrel in our video as that is a function of a qualified gunsmith. 

This video features a Winchester 94 in 30-30. However, this process will also work for the calibers as well. Even though, this video features the "New Model", the concepts can translate over to a pre-64 or post new model rifle. Things may just look different. Or instance, the link screw on this rifle will be a pin held in with a screw on the bottom of the link on a pre-64 rifle. 

There are a lot of screws in this rifle, we recommend a quality gunsmithing screwdriver set. Visit our article titled Gunsmith screwdriver vs regular screwdriver - there is a difference to learn more about gunsmithing screwdrivers. 

If you interested in learning more about the Winchester 94 rifle, visit our Winchester 94 reassembly video which will give you an entire Winchester 94 disassembly and reassembly instructions. The Model 1894 is an iconic levergun typically called the Winchester 30-30.

While you are at our site, why not learn more about the tools that we used on the Winchester 94 videos visit our article titled Winchester 94 - Tools used in our Videos and visit our troubleshooting guides at http://trb.fyi/troubleshooting/ while you are on our site.

#Winchester #30-30 #94 @TheRogueBanshee #1894

Video Index:
Intro - 0:00
Removing the stock - 0:47
Lower tang removal - 1:19
Lower tang disassembly - 2:21
Lever and breechbolt removal - 4:44
Lever disassembly - 6:15
Locking block disassembly - 7:33
Breechbolt disassembly - 8:06
Carrier and spring cover removal - 10:00
Cartridge guide and carrier spring removal - 10:50
Magazine tube removal - 12:12
Installing the magazine tube - 18:55

-------
How to support us:
Shopping our Affiliate links and banners on
https://www.trb.fyi

A full list of our Affiliate partners (support us for free by clicking these links before you shop)
https://linktr.ee/theroguebanshee or https://bit.ly/3cLTAi1

Support this channel on Patreon
https://bit.ly/3cQQYzo

Support this channel on Subscribestar
https://bit.ly/354ckq6
-------

-------
Social Media
Website
https://www.trb.fyi

Instagram
https://www.instagram.com/theroguebanshee

Facebook
https://www.facebook.com/TheRogueBanshee
-------

-------
Gear that I run

Computer
https://www.amazon.com/shop/theroguebanshee?listId=28W3UO8YXBKY3

Studio
https://www.amazon.com/shop/theroguebanshee?listId=2LISYK2A6DTTC

Camera and Mic
https://www.amazon.com/shop/theroguebanshee?listId=24PJH5W612YLL

My 3d Printer setup
https://www.amazon.com/shop/theroguebanshee?listId=1UL6S39TFWX53
-------

-------
Credits
The Rogue Banshee Original Content
Credit: Jason Schaller
jschaller@trb.fyi
-------

The products (videos, articles, pictures. etc.) available through The Rogue Banshee (including gear, tools, products, etc. that are featured, seen or used) are for informational and entertainment purposes only. All activities are completed in accordance with all local, state and federal regulations, as well as in a safe manner in approved locations with professional supervision.

Affiliate Disclaimer: In accordance with the rules and regulations set by the FTC, The Rogue Banshee is an affiliate marketer for several companies.