TUTORIAL: HOW TO CHANGE NUMBER PLATE FRAME?

Relax and enjoy this clip. Also, subscribe for more!

What You'll Need:
New license plate frame
Screwdriver (usually a flathead or Phillips)
Wrench or socket set (if needed)
New screws (optional, if the old ones are damaged)
Steps:
Prepare the Vehicle:

Park your car on a flat surface and engage the parking brake for safety.
Remove the Old License Plate Frame:

Locate the screws holding the current license plate and frame in place. These are typically on the top and bottom edges of the frame.
Use a screwdriver or wrench to loosen and remove the screws. Keep the screws if you plan to reuse them, or discard them if they’re rusted or damaged.
Carefully remove the license plate and the frame from the car.
Install the New License Plate Frame:

Position the new frame over the license plate. Make sure the holes align with the screw locations on the vehicle.
If the new frame didn’t come with screws, use the old ones or purchase new ones to fit the frame.
Insert the screws through the frame and into the mounting holes on the car.
Tighten the screws using the screwdriver or wrench, but be careful not to overtighten as this can damage the frame or the vehicle.
Check the Placement:

Make sure the license plate is straight and securely fastened.
Ensure the frame doesn’t obstruct any important parts of the plate, like the registration stickers or numbers.
Final Touches:

Once the new frame is installed, check the frame for any loose screws or misalignment. Adjust if needed.