The Coffin - A Wooden PC Case Build [DIY]

Save
10 months ago
5
Technology

A video on why and how I built a wooden PC case for an old but still good PC. The Precision T7400.

NOTE: Apologies for the images, I used my cellphone to record.

----

Donate here:
https://www.paypal.com/donate?token=pA2zM0Iy2-aEPFm2glz5k1vbBf5sKClw3l83Q6wMRtJ64u56lsEZ2TAEydJW73pdFTFWJ_YQCeDN33Cc&locale.x=US

Bitcoin here: 19JXFGfRUV4NedS5tBGfJhkfRrN2EQtxVo

Timecodes
0:00 - Start
0:05 - Intro
0:40 - The Issue
2:06 - Measurement basics
2:45 - Getting the bottom layout
4:18 - The MOBO standoff screws
4:40 - Cutting the bottom and back sides
5:20 - 3D Printing a PSU holder
5:40 - Getting the standoff screws ready
6:37 - Fixing the Motherboard
7:10 - Figuring out the holes on the back side
7:33 - Holding the PSU
9:24 - Cutting the holes in the back
10:09 - Cutting the other sides
11:14 - The PCI hole in the back
11:44 - Fan locations
13:04 - How to hold the SSD drive
13:50 - The front of the case
14:35 - Where to put the fans
16:14 - Final painting and joining
16:47 - Case intruder switch
17:03 - Power on test
17:42 - Closing it
18:27 - Final Result
19:45 - Outro

Loading comments...