MAKING A CHRISTMAS TREE-O FROM SCRAP WOOD (CHRISTMAS COUNTDOWN OF CRAFTS DAY 17) GREAT CRAFT TO SELL

Inspired by a photo I saw on Pinterest, make this Christmas Tree-o (trio) using scrap lumber.

REFERENCED ETSY LISTING:

TOOLS USED:

Table saw, Miter saw, drill, pin nailer, brad nailer, sander, square, tape measure, pull saw

SUPPLIES:

Dowel rods, wood glue, paint, pin or brad nails
Dark Red, Crafter's Closet, Dollar General
Toasted Marshmallow, Apple Barrel, Walmart

CUT LIST:

Wood strips measuring 1" in width, my boards were 5/8" in thickness.
You will need at least 25 feet

SPACER: 1/4"
I drew a directional arrow to signify the front plus a horizontal line to mark the desired angle.

SMALL TREE:

BODY:
13 boards beginning with 1" and increasing by increments of a half inch, ending with 7."

TRUNK:
1" wide, by 5/8" thick, by 2" high.

BASE:
4X4"

OVERALL HEIGHT: 12"

MEDIUM TREE:

BODY:
19 boards beginning with 1" and increasing by increments of a half inch, ending with 10."

TRUNK:
1" wide, by 5/8" thick, by 2 1/2" high

BASE:
5X5"

OVERALL HEIGHT: 16"

LARGE TREE:

BODY:
23 boards beginning with 1" and increasing by increments of a half inch, ending with 12."

TRUNK:
1" wide, by 5/8" thick, by 3" high

BASE:
6X6"

OVERALL HEIGHT: 20"