Electrastim Flick Stimulator EM60-E

How To Use The EM60 'Flick'
Changing Power Levels

Switch on your EM60 by pressing the on/off button. The display will illuminate to let you know the unit is active. The intensity level will be set to 0 and the stimulation will be on a continuous setting.

Increase the power level by pressing the intensity up button and you will begin to feel stimulation. Every press will increase the stimulation intensity by one level and you may need to climb a few levels before you notice the sensations. If you do not feel any stimulation, switch the stimulator off and reconnect the pins, ensuring they are inserted all the way into your chosen electrode/s and try again.

There are 24 intensity levels to cater for all tastes, so you’ll find the right setting for you with a little experimentation. If stimulation feels too intense, press the intensity down button or press the on/off button to switch the unit off. When you power the stimulator up again, intensity will be reset to 0.

The intensity level display has 12 lights that illuminate at 3 different brightness levels to tell you which intensity level has been selected.

Changing Patterns

Each press of the mode button will change the stimulation pattern.

There are 7 settings in total and the stimulator will always start with the continuous setting. Each press of the mode button will activate a new pattern setting.

The output activity LED monitor will flash an orange LED light in time with stimulation, so you know which pattern setting is selected.

Activating the 'Flick' mode

Hold the mode button down for two seconds and you’ll activate our revolutionary Flick mode. This specialist setting allows you to enjoy stimulation that reacts to your movements, creating tailor-made patterns.

How To Use The Flick Mode

Hold the stimulator flat and use up-and-down motions to shake it similarly to how you might shake a maraca. The harder and faster you shake, the more intense and quicker stimulation will feel. You can adjust the intensity levels just like you can with any of the other stimulation modes so it will never feel too strong.
The Flick LED display will show you the intensity of each motion. When you are reaching your maximum selected intensity, it will show four green lights and one red light at the very top. To increase intensity further, simply press the intensity up button.
Sharing sensations with a partner

You and your partner can share sensations with ElectraStim Flick when you both use an electrode connected to the same stimulator. Connect your electrodes as normal but instead of one person using both electrodes, you’ll each take charge of your own electrode. You can use any combination of electrodes to complement your individual tastes.

Once your electrodes are in place, you should get into position and make sure your bodies are touching below the waist before you switch the stimulator on. Slowly increase the intensity to a level you’re both happy with as you will both experience the same intensity. During play you’ll both experience sensation through your chosen electrodes but you’ll also feel those erotic tingles everywhere you touch one another for a truly synchronized sexual experience.
Important: Keep all bodily contact below the waist with all kinds of electro stimulation.