Holley 12-426 Fuel Pump to replace Burned SU. 12-810 Switch? Ode to John Twist-He Rocks? Ant Trap?

I hope John Twist is watching this, and other videos, where having a well fitting rocker shaft rockers really does matter. I asked John Twist himself at an event talking about adjusting rocker clearance and I asked him about having well fitting shaft to rockers and he said: "It does't matter as the self adjust and it's a non issue"... I mean he really said that knowing (or not knowing) tapping noises and loss of oil pressure at the shaft and lifters is a real issue. I lost all respect for him at that moment. How in the world can one get an accurate adjustment on a worn rocker shaft/rockers? I have seen these worn over an over and it is hard to spot as it's a must to remove the whole shaft, and get the spring pressure off the rockers, to see how bad these can be.

Lucy don't know what day it is or if it has an OEM AC Delco Mech fuel pump or a nice new electric Holley or Edelbrock. This removes the chance of pumping oil into your crankcase and destroying your motor. Maybe the Holley 12-810 oil pressure safety is a good idea but I'd also have a mechanical oil pressure gauge and of course use a relay on the electric pump with a fuse or circuit breaker AND solder and heat shrink tube all fittings. Wix 33033, 33032 or 33031. Easy to remember numbers 3/8, 5/16 & 1/4. I don't use the plastic fuel filters anymore but I also know how clean my fuel cells/tanks are. Wish Wix, or someone made fuel filters with mixed numbers (3/8th to 5/16 for example) to save the fitting of a... fitting that steps up or down fuel line. Less fitting and clamps is a good thing! Maybe not a big seller but would be so useful on older cars like lots of us have. The Holley 12-425, 12-426, 12-427 & 12-428 Gasoline & Electric Fuel Pump fit almost exactly the same.

A bit of radio control talk as I am loving my Yu Xiang EC135 F06 Helicopter/Helikopter.

I had a problem with hornets and bees annoying my hummingbirds at my feeder so I did the apple juice/boric acid trick in the feeder ant trap and dang if it didn't work just dandy. I haven't see a hornet or bee in days. Make sure the hummers and dragonflys don't get into it but for me that hasn't been a problem. You can use the coke can trick with straw but I haven't needed to do that. Let me say too that having hummingbirds all around the house cut the gnats to almost zero as they seem to eat em all up!

Please only do what I do at your own risk.

I have some information on Odysee too if you'd like to check that out and I also post these on Rumble and X.

Thank You for watching