Premium Only Content

EcoFlow Delta II Powerstation & Extra Battery - Conditioning the Battery Every Three Months
According to the manual, you're supposed to "condition" your EcoFlow battery every three months. This involves draining the battery to a low level and then charging it back up.
Here's a quote from the manual:
"For long-term storage, please discharge the product every three months (firstly discharge it to 0%, then fully recharge it, and lastly discharge it to 60%); the product will not be covered by the warranty if it is not charged or discharged for more than 6 months."
That's very specific.
I'm not using my EcoFlow as a portable power supply which is the typical usage. Instead, I'm using it every day as an Emergency Power Supply (UPS) to provide standby power for my 3d Printer if the power goes out. 3d Prints can take hours, so a regular UPS (which I also have) isn't sufficient; It can only provide power for about 1 hour.
I'm using a real UPS in between my Delta II and the 3d printer because the Delta II isn't rated to switch to battery power fast enough to keep a computer (which is in the heart of the 3d printer) going without a glitch.
I drained the EcoFlow down to 0% by running my 3d Printer for 12+ hours with the EcoFlow Delta II and the extra battery unplugged from wall power.
I monitored closely during the day, but I used a YoLink power outage detector to send me an alert when the EcoFlow Powerstation was depleted. I reviewed this detector in this video: https://youtu.be/A2dQgyBRxvU
NOTE: I also use the Delta II to power our WiFi & Fridge during longer power outages. That takes priority over keeping a 3d print going, but usually the power is only out for 3-4 hours, so I can do both. If necessary, I can hook up my Champion 3400-Watt Dual Fuel Generator to recharge the Delta II if the power outage lasts longer. I cover that scenario in this video series: https://youtu.be/m8Lpj20gMrk
Link to EcoFlow Delta II:
https://us.ecoflow.com/products/delta-2-portable-power-station
Link to EcoFlow Delta II on Amazon:
https://smile.amazon.com/gp/product/B0B9XB57XM/
Link to YouLink Power Outage Detector & Hub:
https://www.amazon.com/gp/product/B09QCBV6YF/
-------------------
Link to my Etsy Store:
https://betacygnidesigns.etsy.com/
---------------------
End Screen Video Acknowledgement: Cosmic Reef Video produced by NASA and the Space Telescope Science Institute (STScI).
https://hubblesite.org/contents/media/videos/2020/16/1277-Video
-
27:15
Helping others to learn new things and experience other parts of the world.
15 days ago3d Printing & Assembly of a Complex Model: SpaceX Starship, Super Heavy, and Launch Tower - Part 15
32 -
8:31
MattMorseTV
4 hours ago $0.73 earnedTexas just did the IMPOSSIBLE.
22.1K54 -
24:39
MYLUNCHBREAK CHANNEL PAGE
1 day agoInterdimensional Beings at Borobudur
29.4K17 -
12:42
Scammer Payback
22 hours agoCalling Scammers who were Raided
9.46K10 -
23:31
IsaacButterfield
14 hours ago $0.02 earnedThe Woke Mob Is Really CANCELLING Matt Rife For THIS…
9.83K10 -
1:23
WildCreatures
8 days ago $0.94 earnedThis mother armadillo eating her palm nuts is truly adorable
10K14 -
8:59
The Art of Improvement
10 hours ago $0.01 earnedHow to Build the Most Powerful Mindset for Success
9.9K2 -
GritsGG
1 day ago36 Hour Stream! Most Wins 3420+ ðŸ§
237K11 -
1:26:16
Michael Franzese
19 hours agoMenendez Brothers Denied Parole – Newsom Holds Their Fate
117K88 -
2:36:02
I_Came_With_Fire_Podcast
18 hours agoSecret Origins of Transhumanism & The New Atlantis
37.8K18