Premium Only Content

How To Make A Wooden Bar Clamp
Making a wooden bar clamp is a straightforward project that can be accomplished with basic woodworking tools and materials. Here's a step-by-step guide:
Materials and Tools Needed
Materials:
Hardwood for the bars and jaws (e.g., oak, maple, or walnut)
Threaded rod (e.g., 3/8" or 1/2" diameter)
Nuts and washers to fit the threaded rod
Wood glue
Wood screws
Epoxy (optional, for added strength)
Tools:
Saw (circular saw, miter saw, or hand saw)
Drill with various drill bits
Clamps (for holding pieces together while glue dries)
Wrench (for tightening nuts)
Sandpaper or sander
Measuring tape or ruler
Square
Chisel (optional, for fine adjustments)
Steps to Make a Wooden Bar Clamp
1. Cut the Wood Pieces
Bar: Cut a hardwood piece to the desired length of your clamp. Typically, a length of 24 to 36 inches is practical.
Jaws: Cut two pieces of hardwood for the jaws. These should be about 6 inches long, 2 inches wide, and 1 inch thick. The jaws can be adjusted according to your needs.
2. Drill Holes for the Threaded Rod
On each jaw, drill a hole slightly larger than the diameter of your threaded rod. Ensure the holes are aligned when the jaws are placed on the bar.
3. Prepare the Bar
If you want to prevent the jaws from sliding off the bar, drill a hole at one end of the bar and insert a bolt or dowel. This will act as a stop.
4. Assemble the Jaws
Insert the threaded rod through the holes in the jaws.
Secure the rod in place with nuts and washers on both sides of each jaw. You can use epoxy to secure the nuts for a stronger hold.
5. Attach the Jaws to the Bar
Position the jaws on the bar and mark
-
8:01
MattMorseTV
1 day ago $8.32 earnedNYC Democrat is in HOT WATER.
43.7K98 -
7:24
Warren Smith - Secret Scholar Society
1 day ago1 Guy Causes Entire Mob of Protesters to Implode & Get Arrested
74.1K41 -
31:24
The Why Files
3 days agoSynchronicities | The Science Behind Your Meaningful Coincidences (STRIPPED)
45.1K44 -
2:07:34
FreshandFit
6 hours agoWhy You Are Unhappy Dating!
56.7K17 -
1:21:38
Badlands Media
1 day agoDevolution Power Hour Ep. 367
108K26 -
2:28:09
Tundra Tactical
6 hours ago $7.97 earned🔥 NFA Hypocrisy EXPOSED: the Senate Just Screwed Gun Owners (Again) | Tundra Nation Live Roast 🔥
39.1K3 -
3:44:43
DLDAfterDark
5 hours ago $5.03 earnedDLD Live! Red Dawn Readiness! HPA & Short Act Updates - T Rex Arms - Guns Gear & God
32.6K1 -
LIVE
GamersErr0r
5 hours ago $1.48 earnedMarvel Rivals Booty Bandit | Ft. SnoopLion
204 watching -
56:47
Man in America
13 hours agoMEP Christine Anderson EXPOSES the SINISTER Plan for Global Slavery—and How We FIGHT BACK
79.5K24 -
3:44:43
BlackDiamondGunsandGear
4 days ago🔴 DLD After Dark w/ Redawn Readiness / They don’t care. They not gonna start now…
27.3K4