Ep4 NP208 Transfer Case SYE Install on our 1964 Pontiac Safari Wagon 4x4 Project

Help support this channel by visiting our Amazon storefront!!!
https://www.amazon.com/shop/deathtollracing

Today at Death Toll Racing we....

-Remove our new cross member
-Tear down and check a NP208 for problems
-Install a new SYE kit from Tom Wood's
-Re install the transfer case
-Get yelled at by Murder Bob and potentially fired.
-General shop talk.

NP208 are very simple to rebuild. Very few things to watch out for and no special tools required.

Tools I used to rebuild this
-1 1/8 socket
-15mm socket
-9/16 socket
-10mm socket
-9/16 wrench
-Snap ring pliers
-Flat (std) screw driver (or pry tool similar)
-need nose pliers
-Petroleum jelly
-Impact gun (helpful on front output shaft nut)
-Rubber mallet

Many of topics today apply to most New Process transfer cases and even others.

#4x4 #4x4life #custom4x4 #4x4cars #4x4stationwagon #catalina #stationwagon #musclecar #mudtruck #rockcrawler #4link #heim #weldporn #welding #tig #mig #Chevy #chevrolet #c10 #k30 #k5 #blazer #14bolt #coilovers #desertracer #offroad #deserttruck #bugout #Ballistic #BallisticFab #Hack #Hacks #4x4conversion #dana44 #powerlock #methodracing #MethodWheels #beadlocks #BeadLock #overland #build #offroad #sbc #bbc #sbf #bbf #pontiac #fabrication #fab #longarms #kingsuspension #kingcoilovers #bugoutvehicles #4x4fabrication #hydroboost #PSC #xj #jeep #np208 #sye